Date   

Re: Beta12 release announcement

john.chabalko@...
 

I went through the update tonight. I'm using beta 11 but have been running manual updates against it so take my experience with a grain of salt.

I followed your instructions to update the scripts:
cd n7mix
git pull

I ran into one problem running prog_refresh:
---------------
FINISHED copying bin files

FINISHED copying AX.25 files
/home/pi/bin/prog_refresh.sh: line 145: unexpected EOF while looking for matching `"'
/home/pi/bin/prog_refresh.sh: line 147: syntax error: unexpected end of file
---------------
This seemed curious as the file contains only 141 lines. I checked and it looks like right after finishing copying the AX25 files it updates the DRAWs manager. I've run it a second time after finishing all of this and it simply states that the DRAWs manager is up to date, and everything else appears to be in order

I then proceeded with hf_verchk.sh -u which installed the fldigi source and compiled it - that seemed to take close to 30 minutes on my 3b+.

After that i rebooted, checked my audio and re-ran "prog_refresh -c"

pi@n3ap-p:~/n7nix/hfprogs $ prog_refresh.sh -c
js8call: current version: 1.0.0, installed: 1.0.0
wsjtx:   current version: 2.0.1, installed: 2.0.1
Library: libflxmlrpc IS loaded.
flxmlrpc:  current version: 0.1.4, installed: 0.1.4
fldigi:  current version: 4.1.02, installed: 4.1.02
flrig:  current version: 1.3.43, installed: 1.3.43
flmsg:  current version: 4.0.8, installed: 4.0.8
flamp:  current version: 2.2.04, installed: 2.2.04
Source not downloaded.
xs_verchk.sh: Detected xastir package.
xastir: current version: , installed: 2.0.8?
gp_verchk.sh: Detected gpsd package.
gpsd: current version: 3.18.1, installed: 3.18.1

All looks good, i've been using js8 and fldigi tonight so far with no issues or changes in behavior.

73


Re: Beta12 release announcement

Jack Spitznagel
 

Basil,

Final piece of info:

I have 2 DRAWS hats, one of the December early adopter batch and one of the
most recent batch. I ran all the BETA 12 tests with both DRAWS hats. With
the first one, I thought I'd bricked it somehow. I swapped in the second and
it did the same. I have them both now running using BETA 10. So something in
what I was doing would not let me end run the Auto-sense Pi Driver issue.
Both are on Pi 3B+-en.

Thanks for all the incredible work you are doing managing the configuration
(and all of us "luser"-types out here).

KD4IZ
Jack Spitznagel
FM19oo

-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 21:30
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Here 'tis. No joy after reboot.

Jack

-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 20:50
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement



One more self-explanatory file. Suggestions?
Thanks.

Try rebooting & run showudrc.sh again and send it to me. I'm pretty sure
this is the AudioSense-Pi driver problem. running chk_conflict.sh should fix
that. That script is run from the prog_refresh.sh script but you have to
reboot to get the DRAWS driver loaded.

/Basil




-----Original Message-----
From: udrc@nw-digital-radio.groups.io
<udrc@nw-digital-radio.groups.io> On Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 20:00
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Hate it when I miss things. See the last line in the attached file. No
DRAWS detected.
WTF? It was working before I did the update.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io
<udrc@nw-digital-radio.groups.io> On Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 19:23
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the
documentation over BETA 9 which has been running ok on my early
release
hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so
could not get Direwolf going. I then followed the direction to fix the
sound driver issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the
full install as per instructions and wound up with the same issue. Ran
the sound driver correction script and again same result. Please see
the attached text file.

Possible that I messed a step somewhere - but I have used all betas
since day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io
<udrc@nw-digital-radio.groups.io> On Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes
you might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card
size of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at
this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the
updater scripts for either updating everything or just Xastir.
Updating all programs can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_U
PDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Starte
d

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving
maps ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u
options does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built
from source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to
/usr/local/share in local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add
dmesg output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install
program is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not
comparing valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install
script was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo
does not exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version
number regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version
checked & installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare &
quiet output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing
sorted web page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since
installed from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to
gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source
version numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since
installed from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of
xastir install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead
of gpsd sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD
diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd
sentences, parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format:
Degrees Minutes.m d30e51e - n7nix, 12 days ago : Update beacon
commands to pull lat & lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking
if it exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix





--
J Spitznagel
Science River LLC
KD4IZ





--
J Spitznagel
Science River LLC
KD4IZ




--
J Spitznagel
Science River LLC
KD4IZ






--
J Spitznagel
Science River LLC
KD4IZ


Re: Beta12 release announcement

J P Watters <kc9kko@...>
 

Similare Experience EXCEPT Solved with a change to config.txt
My hardware is a 10" LCD Panel with touch screen, and the physical configuration is that the screen is actually upside down.
So I have to flip it. 
Secondly, This unit runs with out Monitor or LCD normally.
That means that if you plug in a HDMI Monitor to see what is going on after a boot. NO VIDEO because it was not detected on the last boot. 
So I have to hard code it so I can plug in later. 

Previously I had in the config.txt

hdmi_group=2

hdmi_mode=85


When Beta Version 12 booted on that NO VIDEO
commented those two out. 
Rebooted, and video returned, 
Reran raspi-config
and the hdmi_mode=85 (1280x720))was not a offered selection.
but 
hdmi_mode=27 was 

I am currently working in getting the Touchscreen to be flipped also. Right now it is upside down. 




Re: Icom 706MKIIG Setup #icom #ptt

 

Yes, looking at the side of the HAT, it's SMA, left DIN, right DIN. Also the.CODEC left channel goes to the left, right channel to right DIN. Same with the GPIO PTT. 


On Wed, Apr 17, 2019, 17:18 Richard Waller via Groups.Io <rewaller=verizon.net@groups.io> wrote:
John, by left and right are you referring to the mini din connectors? Ka4ohm




Re: Beta12 release announcement

Steve, N9VW
 

Basil,
Yes, starting from the Beta 12 image on a new 16G card using BalenaEtcher.

I ran chk_conflict.sh and the output from that up to the reboot is in the attachment chk_conflict.txt

I ran through the entire process, attached is the output from showudrc

Steve, N9VW

On 4/17/2019 6:02 PM, Basil Gunn wrote:
Steve, N9VW <steve@vanwambeck.net> writes:

I have run through the instructions and loaded two different 16G
cards.
Are you starting from a BETA12 image or did you run prog_refresh.sh?
The DRAWS card is not being seen so trying running:

chk_conflict.sh

and reboot
Then send me all the output of showudrc.sh

/Basil



Re: Icom 706MKIIG Setup #icom #ptt

Richard Waller <rewaller@...>
 

Thanks Todd. Ka4ohm 


On Apr 17, 2019, at 9:07 PM, Todd via Groups.Io <ic7461@...> wrote:

Correct Richard. You can determine which one your connected to by entering either command and see which one KEYS your radio. Mine was on the right DIN. Then you use correct pin number in your script.
Todd
AL7PX


Re: Beta12 release announcement

Jack Spitznagel
 

Basil,

Here 'tis. No joy after reboot.

Jack

-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 20:50
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement



One more self-explanatory file. Suggestions?
Thanks.

Try rebooting & run showudrc.sh again and send it to me. I'm pretty sure
this is the AudioSense-Pi driver problem. running chk_conflict.sh should fix
that. That script is run from the prog_refresh.sh script but you have to
reboot to get the DRAWS driver loaded.

/Basil




-----Original Message-----
From: udrc@nw-digital-radio.groups.io
<udrc@nw-digital-radio.groups.io> On Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 20:00
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Hate it when I miss things. See the last line in the attached file. No
DRAWS detected.
WTF? It was working before I did the update.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io
<udrc@nw-digital-radio.groups.io> On Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 19:23
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the
documentation over BETA 9 which has been running ok on my early release
hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so
could not get Direwolf going. I then followed the direction to fix the
sound driver issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the
full install as per instructions and wound up with the same issue. Ran
the sound driver correction script and again same result. Please see
the attached text file.

Possible that I messed a step somewhere - but I have used all betas
since day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io
<udrc@nw-digital-radio.groups.io> On Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes
you might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card
size of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at
this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the
updater scripts for either updating everything or just Xastir.
Updating all programs can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_U
PDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Starte
d

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving
maps ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u
options does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built
from source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to
/usr/local/share in local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add
dmesg output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install
program is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not
comparing valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install
script was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo
does not exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version
number regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version
checked & installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare &
quiet output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing
sorted web page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since
installed from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to
gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source
version numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since
installed from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of
xastir install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead
of gpsd sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD
diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd
sentences, parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format:
Degrees Minutes.m d30e51e - n7nix, 12 days ago : Update beacon
commands to pull lat & lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking
if it exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix





--
J Spitznagel
Science River LLC
KD4IZ





--
J Spitznagel
Science River LLC
KD4IZ




--
J Spitznagel
Science River LLC
KD4IZ


Re: Icom 706MKIIG Setup #icom #ptt

 

Correct Richard. You can determine which one your connected to by entering either command and see which one KEYS your radio. Mine was on the right DIN. Then you use correct pin number in your script.
Todd
AL7PX


Re: Beta12 release announcement

Basil Gunn
 

Thanks Keith.

If you follow the instructions to the letter you should have no
problems. The size of the microSD card shouldn't matter as long as it's
at least 16GB.
/Basil n7nix

Keith M. McDonald <wreck_diver@comcast.net> writes:

I am wondering if the failures and errors are related to the increased demand on storage capacity of the SD card?

I downloaded Beta 12 and used Etcher to flash the image to a Class 10 64 GB SD card.

I had no issues with the start up or set up, and I have completed all of the Test and Verification steps without problem so it wouldn’t appear to be an install script error.

Keith
KC1HTC


Re: Beta12 release announcement

Basil Gunn
 

Steve, N9VW <steve@vanwambeck.net> writes:

I have run through the instructions and loaded two different 16G
cards.
Are you starting from a BETA12 image or did you run prog_refresh.sh?
The DRAWS card is not being seen so trying running:

chk_conflict.sh

and reboot
Then send me all the output of showudrc.sh

/Basil

The initial setup and ax.25 scripts are failing.
I went back to Beta 11 and it wall works as expected.

73 de Steve, N9VW



root@draws:/home/pi/n7nix/config# ./app_config.sh core
app_config.sh: script start
app_config.sh: Verify user name: pi
using USER: pi
Enter call sign, followed by [enter]:
n9vw
Using CALL SIGN: N9VW
app_config.sh: Config core
Initial core config script
=== Verify not using default password
User pi found
Determine if default password is being used
User pi is using default password
Need to change your password for user pi NOW
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
=== Verify current hostname: draws
Current host name: draws, change it
Enter new host name followed by [enter]:
n9vw-draws-1
Setting new hostname: n9vw-draws-1
=== Set mail hostname
127.0.1.1 draws draws.localnet
Make host names match between /etc/hostname & /etc/hosts
=== Set time zone & current time
Time zone: BST
=== Set time zone
ie. select America, then scroll down to 'Los Angeles'
then hit tab & return ... wait for it

Current default time zone: 'US/Pacific-New'
Local time is now: Wed Apr 17 15:14:36 PDT 2019.
Universal Time is now: Wed Apr 17 22:14:36 UTC 2019.

Locale country codes do not match: WiFi: , iw: 00, X11: US.
=== Set WiFi country code to US
Locale country codes consistent among WiFi cfg file, iw reg & X11: US
=== Put some scripts in local bin dir
app_config.sh: Verify user name: pi
using USER: pi

FINISHED copying bin files
=== Set alsa levels for UDRC
Set sound card levels return: 0
=== Set ip addresses on AX.25 interfaces
If you do not understand or care about the following just hit enter for default values
Enter ip address for AX.25 interface ax0 followed by [enter]: 192.168.50.201
Verifying ip address: 192.168.50.201
Verifying ip address ret: 0
Valid ip address: 192.168.50.201
Setting ax0 to 192.168.50.201
Enter ip address for AX.25 interface ax1 followed by [enter]: 192.168.50.202
Verifying ip address: 192.168.50.202
Verifying ip address ret: 0
Valid ip address: 192.168.50.202
Setting ax1 to 192.168.50.202
AX.25 ip addresses: ax0: 192.168.50.201, ax1: 192.168.50.202

before:

IPADDR_AX0="192.168.255.2"
IPADDR_AX1="192.168.255.3"

after:

IPADDR_AX0="192.168.50.201"
IPADDR_AX1="192.168.50.202"
=== FINISHED Setting up ip addresses for AX.25 interfaces
200 OK
2019 04 17 15:16:06 PDT: app_config.sh: core config script FINISHED

/home/pi/n7nix/ax25 /home/pi/n7nix/config

AX.25 config START
Found ax.25 link or directory
AX.25 config: User=pi, Callsign=N9VW
Using CALL SIGN: N9VW
app_config.sh: Verify user name: pi
using USER: pi
No ax25 ports defined
Original ax25 axports saved as axports-dist
Using CALL SIGN: N9VW
Enter ssid (0 - 15) for direwolf APRS, followed by [enter]:
10
Using SSID: 10
ax25d not configured
Original ax25d.conf saved as ax25d.conf-dist
2019 04 17 15:16:28 PDT: app_config.sh: AX.25 install script FINISHED

/home/pi/n7nix/direwolf /home/pi/n7nix/config

direwolf config START
Using CALL SIGN: N9VW
using USER: pi
Found an existing /etc/direwolf.conf config file.
Test pwd: /home/pi/n7nix/direwolf, path: /home/pi/n7nix
Found udrcver.sh here: /home/pi/n7nix/bin
Draws installed
No udrc sound card found by aplay ... exiting
root@draws:/home/pi/n7nix/config#pi@n9vw-draws-1:~ $ ax25-status
Status for direwolf.service: NOT RUNNING and ENABLED
Status for ax25dev.service: NOT RUNNING and ENABLED
Status for ax25dev.path: RUNNING and ENABLED
Status for ax25-mheardd.service: NOT RUNNING and ENABLED
Status for ax25d.service: NOT RUNNING and ENABLED
AX.25 device: ax0 not configured
AX.25 device: ax1 not configured
pi@n9vw-draws-1:~ $ ax25-status -d
AX25 Debug Status
== failed & loaded but inactive units==
UNIT LOAD ACTIVE SUB DESCRIPTION
● ax25d.service loaded failed failed General purpose AX.25 daemon
● ax25dev.service loaded failed failed AX.25 device
● direwolf.service loaded failed failed Direwolf Daemon

LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.

3 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.

== direwolf ==
pid:
ver: Dire Wolf DEVELOPMENT version 1.6 B (Feb 27 2019)
== /proc/sys ==
core ipv4 ipv6 netfilter unix
ls: cannot access '/proc/sys/net/ax25': No such file or directory

== Network Interface ax0 & ax1 ==
Device "ax0" does not exist.

Device "ax1" does not exist.

== status networkd services ==
disabled
● systemd-networkd-wait-online.service - Wait for Network to be Configured
Loaded: loaded (/lib/systemd/system/systemd-networkd-wait-online.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:systemd-networkd-wait-online.service(8)
disabled
● systemd-networkd.service - Network Service
Loaded: loaded (/lib/systemd/system/systemd-networkd.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:systemd-networkd.service(8)

== status direwolf service ==
enabled
● direwolf.service - Direwolf Daemon
Loaded: loaded (/etc/systemd/system/direwolf.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2019-04-17 15:35:14 PDT; 1min 38s ago
Process: 571 ExecStop=/bin/rm -f /tmp/kisstnc (code=exited, status=0/SUCCESS)
Process: 350 ExecStart=/usr/bin/direwolf -t 0 -c /etc/direwolf.conf -p (code=exited, status=1/FAILURE)
Process: 282 ExecStartPre=/bin/rm -f /tmp/kisstnc (code=exited, status=0/SUCCESS)
Main PID: 350 (code=exited, status=1/FAILURE)

Apr 17 15:35:09 n9vw-draws-1 systemd[1]: Started Direwolf Daemon.
Apr 17 15:35:09 n9vw-draws-1 direwolf[350]: Dire Wolf DEVELOPMENT version 1.6 A (Dec 9 2018)
Apr 17 15:35:09 n9vw-draws-1 direwolf[350]: Reading config file /etc/direwolf.conf
Apr 17 15:35:09 n9vw-draws-1 direwolf[350]: Audio device for both receive and transmit: default (channel 0)
Apr 17 15:35:09 n9vw-draws-1 direwolf[350]: Could not open audio device default for input
Apr 17 15:35:09 n9vw-draws-1 direwolf[350]: No such file or directory
Apr 17 15:35:09 n9vw-draws-1 direwolf[350]: Pointless to continue without audio device.
Apr 17 15:35:14 n9vw-draws-1 systemd[1]: direwolf.service: Main process exited, code=exited, status=1/FAILURE
Apr 17 15:35:14 n9vw-draws-1 systemd[1]: direwolf.service: Unit entered failed state.
Apr 17 15:35:14 n9vw-draws-1 systemd[1]: direwolf.service: Failed with result 'exit-code'.

== status ax25 service ==
enabled
● ax25dev.service - AX.25 device
Loaded: loaded (/etc/systemd/system/ax25dev.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2019-04-17 15:35:09 PDT; 1min 43s ago
Process: 358 ExecStart=/bin/bash -c /etc/ax25/ax25-upd (code=exited, status=1/FAILURE)
Main PID: 358 (code=exited, status=1/FAILURE)

Apr 17 15:35:09 n9vw-draws-1 systemd[1]: Starting AX.25 device...
Apr 17 15:35:09 n9vw-draws-1 bash[358]: ax25-upd: Start Port udr0 with device /tmp/kisstnc
Apr 17 15:35:09 n9vw-draws-1 bash[358]: Direwolf serial port NOT FOUND
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: ax25dev.service: Main process exited, code=exited, status=1/FAILURE
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: Failed to start AX.25 device.
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: ax25dev.service: Unit entered failed state.
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: ax25dev.service: Failed with result 'exit-code'.

-- Logs begin at Wed 2019-04-17 15:35:08 PDT, end at Wed 2019-04-17 15:36:53 PDT. --
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: Starting AX.25 device...
Apr 17 15:35:09 n9vw-draws-1 bash[358]: ax25-upd: Start Port udr0 with device /tmp/kisstnc
Apr 17 15:35:09 n9vw-draws-1 bash[358]: Direwolf serial port NOT FOUND
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: ax25dev.service: Main process exited, code=exited, status=1/FAILURE
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: Failed to start AX.25 device.
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: ax25dev.service: Unit entered failed state.
Apr 17 15:35:09 n9vw-draws-1 systemd[1]: ax25dev.service: Failed with result 'exit-code'.

== status ax25 path ==
enabled
● ax25dev.path
Loaded: loaded (/etc/systemd/system/ax25dev.path; enabled; vendor preset: enabled)
Active: active (waiting) since Wed 2019-04-17 15:35:09 PDT; 1min 44s ago

Apr 17 15:35:09 n9vw-draws-1 systemd[1]: Started ax25dev.path.

== status ax25-mheardd ==
enabled
● ax25-mheardd.service - AX.25 mheard daemon
Loaded: loaded (/etc/systemd/system/ax25-mheardd.service; enabled; vendor preset: enabled)
Active: inactive (dead)

Apr 17 15:36:45 n9vw-draws-1 systemd[1]: Dependency failed for AX.25 mheard daemon.
Apr 17 15:36:45 n9vw-draws-1 systemd[1]: ax25-mheardd.service: Job ax25-mheardd.service/start failed with result 'dependency'.

== status ax25d ==
enabled
● ax25d.service - General purpose AX.25 daemon
Loaded: loaded (/etc/systemd/system/ax25d.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2019-04-17 15:36:45 PDT; 8s ago
Process: 1075 ExecStart=/usr/local/sbin/ax25d -l (code=exited, status=1/FAILURE)
Main PID: 1075 (code=exited, status=1/FAILURE)

Apr 17 15:36:45 n9vw-draws-1 systemd[1]: Started General purpose AX.25 daemon.
Apr 17 15:36:45 n9vw-draws-1 ax25d[1075]: ax25d: no AX.25 port data configured
Apr 17 15:36:45 n9vw-draws-1 systemd[1]: ax25d.service: Main process exited, code=exited, status=1/FAILURE
Apr 17 15:36:45 n9vw-draws-1 systemd[1]: ax25d.service: Unit entered failed state.
Apr 17 15:36:45 n9vw-draws-1 systemd[1]: ax25d.service: Failed with result 'exit-code'.

== netstat ax25 ==
Active AX.25 sockets
Dest Source Device State Vr/Vs Send-Q Recv-Q
pi@n9vw-draws-1:~ $
root@n9vw-draws-1:/home/pi/bin# ./ax25-start
Starting: direwolf.service
ENABLING direwolf.service
Created symlink /etc/systemd/system/multi-user.target.wants/direwolf.service → /etc/systemd/system/direwolf.service.
Starting: ax25dev.path
ENABLING ax25dev.path
Created symlink /etc/systemd/system/multi-user.target.wants/ax25dev.path → /etc/systemd/system/ax25dev.path.
Starting: ax25dev.service
ENABLING ax25dev.service
Created symlink /etc/systemd/system/multi-user.target.wants/ax25dev.service → /etc/systemd/system/ax25dev.service.
Job for ax25dev.service failed because the control process exited with error code.
See "systemctl status ax25dev.service" and "journalctl -xe" for details.
Problem starting ax25dev.service
Starting: ax25-mheardd.service
ENABLING ax25-mheardd.service
Created symlink /etc/systemd/system/multi-user.target.wants/ax25-mheardd.service → /etc/systemd/system/ax25-mheardd.service.

A dependency job for ax25-mheardd.service failed. See 'journalctl -xe' for details.
Problem starting ax25-mheardd.service
Starting: ax25d.service
ENABLING ax25d.service
Created symlink /etc/systemd/system/multi-user.target.wants/ax25d.service → /etc/systemd/system/ax25d.service.
root@n9vw-draws-1:/home/pi/bin#


Re: Beta12 release announcement

Basil Gunn
 

One more self-explanatory file. Suggestions?
Thanks.

Try rebooting & run showudrc.sh again and send it to me. I'm pretty
sure this is the AudioSense-Pi driver problem. running chk_conflict.sh
should fix that. That script is run from the prog_refresh.sh script but
you have to reboot to get the DRAWS driver loaded.

/Basil




-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 20:00
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Hate it when I miss things. See the last line in the attached file. No DRAWS
detected.
WTF? It was working before I did the update.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 19:23
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the documentation
over BETA 9 which has been running ok on my early release hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so could not
get Direwolf going. I then followed the direction to fix the sound driver
issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the full
install as per instructions and wound up with the same issue. Ran the sound
driver correction script and again same result. Please see the attached text
file.

Possible that I messed a step somewhere - but I have used all betas since
day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes you
might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card size
of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the updater
scripts for either updating everything or just Xastir. Updating all programs
can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_UPDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving maps
ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u options
does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built from
source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to /usr/local/share in
local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add dmesg
output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install program
is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not comparing
valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install script
was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo does not
exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version number
regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version checked
& installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare & quiet
output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing sorted web
page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source version
numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of xastir
install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd
sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd sentences,
parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format: Degrees
Minutes.m d30e51e - n7nix, 12 days ago : Update beacon commands to pull lat
& lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking if it
exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix





--
J Spitznagel
Science River LLC
KD4IZ





--
J Spitznagel
Science River LLC
KD4IZ


Re: Beta12 release announcement

Basil Gunn
 

You have to reboot after you run chk_conflict.sh because it fixes a
Linux driver load problem. I need to put that in the doc.

ax25_start is failing because there is no driver for the DRAWS card
loaded yet. Should work after you reboot.
/Basil

Jack Spitznagel <kd4iz@frawg.org> writes:

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the documentation
over BETA 9 which has been running ok on my early release hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so could not
get Direwolf going. I then followed the direction to fix the sound driver
issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the full
install as per instructions and wound up with the same issue. Ran the sound
driver correction script and again same result. Please see the attached text
file.

Possible that I messed a step somewhere - but I have used all betas since
day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes you
might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card size
of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the updater
scripts for either updating everything or just Xastir. Updating all programs
can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_UPDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving maps
ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u options
does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built from
source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to /usr/local/share in
local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add dmesg
output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install program
is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not comparing
valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install script
was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo does not
exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version number
regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version checked
& installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare & quiet
output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing sorted web
page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source version
numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of xastir
install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd
sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd sentences,
parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format: Degrees
Minutes.m d30e51e - n7nix, 12 days ago : Update beacon commands to pull lat
& lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking if it
exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix


Re: Beta12 release announcement

Keith M. McDonald <wreck_diver@...>
 

I am wondering if the failures and errors are related to the increased demand on storage capacity of the SD card?

I downloaded Beta 12 and used Etcher to flash the image to a Class 10 64 GB SD card.

I had no issues with the start up or set up, and I have completed all of the Test and Verification steps without problem so it wouldn’t appear to be an install script error.

Keith
KC1HTC


Re: Beta12 release announcement

Steve, N9VW
 

Hi Basil,
I have run through the instructions and loaded two different 16G cards. The initial setup and ax.25 scripts are failing.
I went back to Beta 11 and it wall works as expected.

73 de Steve, N9VW


Re: Icom 706MKIIG Setup #icom #ptt

Richard Waller <rewaller@...>
 

John, by left and right are you referring to the mini din connectors? Ka4ohm


Re: Beta12 release announcement

Jack Spitznagel
 

Basil,

One more self-explanatory file. Suggestions?

KD4IZ
Jack Spitznagel
FM19oo

-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 20:00
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Hate it when I miss things. See the last line in the attached file. No DRAWS
detected.
WTF? It was working before I did the update.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 19:23
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the documentation
over BETA 9 which has been running ok on my early release hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so could not
get Direwolf going. I then followed the direction to fix the sound driver
issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the full
install as per instructions and wound up with the same issue. Ran the sound
driver correction script and again same result. Please see the attached text
file.

Possible that I messed a step somewhere - but I have used all betas since
day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes you
might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card size
of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the updater
scripts for either updating everything or just Xastir. Updating all programs
can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_UPDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving maps
ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u options
does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built from
source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to /usr/local/share in
local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add dmesg
output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install program
is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not comparing
valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install script
was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo does not
exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version number
regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version checked
& installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare & quiet
output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing sorted web
page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source version
numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of xastir
install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd
sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd sentences,
parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format: Degrees
Minutes.m d30e51e - n7nix, 12 days ago : Update beacon commands to pull lat
& lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking if it
exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix





--
J Spitznagel
Science River LLC
KD4IZ





--
J Spitznagel
Science River LLC
KD4IZ





--
J Spitznagel
Science River LLC
KD4IZ


Re: Beta12 release announcement

Jack Spitznagel
 

Basil,

Hate it when I miss things. See the last line in the attached file. No DRAWS
detected.
WTF? It was working before I did the update.

KD4IZ
Jack Spitznagel
FM19oo

-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Jack Spitznagel
Sent: Wednesday, April 17, 2019 19:23
To: udrc@nw-digital-radio.groups.io
Subject: Re: [udrc] Beta12 release announcement

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the documentation
over BETA 9 which has been running ok on my early release hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so could not
get Direwolf going. I then followed the direction to fix the sound driver
issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the full
install as per instructions and wound up with the same issue. Ran the sound
driver correction script and again same result. Please see the attached text
file.

Possible that I messed a step somewhere - but I have used all betas since
day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo



-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes you
might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card size
of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the updater
scripts for either updating everything or just Xastir. Updating all programs
can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_UPDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving maps
ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u options
does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built from
source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to /usr/local/share in
local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add dmesg
output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install program
is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not comparing
valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install script
was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo does not
exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version number
regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version checked
& installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare & quiet
output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing sorted web
page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source version
numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of xastir
install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd
sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd sentences,
parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format: Degrees
Minutes.m d30e51e - n7nix, 12 days ago : Update beacon commands to pull lat
& lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking if it
exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix





--
J Spitznagel
Science River LLC
KD4IZ





--
J Spitznagel
Science River LLC
KD4IZ


Re: Beta12 release announcement

Jack Spitznagel
 

Basil,

Ran through the install twice.

The first time by trying the long update/upgrade path in the documentation
over BETA 9 which has been running ok on my early release hat. Did not work.
I wound up not being able to reach the DRAWS/udrc sound system so could not
get Direwolf going. I then followed the direction to fix the sound driver
issue and tried again, no joy.

Second time I started with a fresh micro SD card and went through the full
install as per instructions and wound up with the same issue. Ran the sound
driver correction script and again same result. Please see the attached text
file.

Possible that I messed a step somewhere - but I have used all betas since
day 1 and this is the first time I have had this problem.

KD4IZ
Jack Spitznagel
FM19oo

-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On
Behalf Of Basil Gunn
Sent: Wednesday, April 17, 2019 13:49
To: udrc@nw-digital-radio.groups.io
Subject: [udrc] Beta12 release announcement


Before you update your image, please capture any configuration changes you
might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum microSD card size
of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at this
location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the updater
scripts for either updating everything or just Xastir. Updating all programs
can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_UPDATER
.md

If you decide to use this image please follow the "Getting Started Guide"
from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving maps
ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u options
does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built from
source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to /usr/local/share in
local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add dmesg
output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install program
is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not comparing
valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install script
was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo does not
exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version number
regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed
version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version checked
& installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare & quiet
output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing sorted web
page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current
version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source version
numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since installed
from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea
get_lat_lon_nmeasentence 2a8f0ab - n7nix, 4 days ago : Change name of xastir
install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd
sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd sentences,
parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting 6a00b2b -
n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format: Degrees
Minutes.m d30e51e - n7nix, 12 days ago : Update beacon commands to pull lat
& lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking if it
exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix





--
J Spitznagel
Science River LLC
KD4IZ


Re: Beta12 release announcement

john.chabalko@...
 

On Wed, Apr 17, 2019 at 10:49 AM, Basil Gunn wrote:
If you decide to use this image please follow the "Getting Started
Guide" from the UDRC Wiki.
thanks a lot basil, i'm going to run through it this evening.

73


Beta12 release announcement

Basil Gunn
 

Before you update your image, please capture any configuration changes
you might have made like current alsamixer settings.
Run alsa-show.sh & make a copy of result. Note a minimum
microSD card size of at least 16GB is now recommended.

Latest image current_beta.zip has been updated to draws_beta12.zip at
this location:

http://images.nwdigitalradio.com/downloads

There is an alternative to downloading a new image. You can use the updater
scripts for either updating everything or just Xastir. Updating all
programs can take a long time.

https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_IMAGE_UPDATER.md

If you decide to use this image please follow the "Getting Started
Guide" from the UDRC Wiki.

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

ChangeLog
* Image BETA12 release
* Add latest release of Xastir to fix gpsd problem
* Change Xaster install script to use latest source
* Add program updater for programs installed from source
* beacmin.sh & btest.sh get position from gpsd
* Use NMEA sentences instead of GPSD sentences
* Add hostap setup script
* Fix new js8call download URL


2b7574f - n7nix, 16 minutes ago : Change SOUND_COMMAND in config file.
f0fc22d - n7nix, 20 minutes ago : Add link to Xastir wiki for saving maps
ea9584f - n7nix, 13 hours ago : Add more verbage for what the -u options does.
940a160 - n7nix, 13 hours ago : Add doc for updating HAM apps built from source.
ed65487 - n7nix, 13 hours ago : Change for /usr/share to /usr/local/share in local xastir config file.
4ca226e - n7nix, 19 hours ago : Add option to only upgrade ham programs.
95c9a43 - n7nix, 20 hours ago : Fix duplicate gpsd status display, add dmesg output.
353566f - n7nix, 20 hours ago : Change recommended size of micro SD card.
9191373 - n7nix, 20 hours ago : Add more verbage for xastir build process.
fc3ebfb - n7nix, 20 hours ago : Correct path to icon png.
0bba82e - n7nix, 2 days ago : Add Xastir packages required for build.
77b71cc - n7nix, 2 days ago : Do a copy update instead of copy everything.
5a5813d - n7nix, 2 days ago : Add check for AudioSense-Pi driver conflict.
9b68f29 - n7nix, 2 days ago : Only put a log file entry if install program is called.
342f76f - n7nix, 2 days ago : Get rid of unparsed command line arg.
a72ddfb - n7nix, 2 days ago : Fix test program ver routine, not comparing valid variable.
06bde91 - n7nix, 2 days ago : Put entry in log file only if install script was called.
85dc248 - n7nix, 2 days ago : Format for better readability.
905da3e - n7nix, 2 days ago : Push current dir before going to SRC_DIR.
5d97c9f - n7nix, 2 days ago : Only get xastir-sounds if local repo does not exist.
1a15d8d - n7nix, 2 days ago : Return a reasonable program version number regardless whether -V option is functional.
ae16a91 - n7nix, 2 days ago : Detect source not downloaded & installed version < 2.1.1
a477631 - n7nix, 2 days ago : Fix usage output to match what script does.
5918914 - n7nix, 2 days ago : Get rid of version number in directory name.
4e836d6 - n7nix, 2 days ago : Fix spelling of get_source_version function.
050fd8c - n7nix, 2 days ago : Add missing install_gps() function.
7d007a0 - n7nix, 3 days ago : Fix multiple file version bug.
591d108 - n7nix, 3 days ago : Fix multiple file version bug.
21a9786 - n7nix, 3 days ago : Reduce output for an install.
abde01c - n7nix, 3 days ago : Reduce output for an install.
7ae8db2 - n7nix, 3 days ago : Add gpsd to programs that are version checked & installed.
8d55303 - n7nix, 3 days ago : Fix multiple versions in directory bug.
aacd1e4 - n7nix, 3 days ago : Fix case statement syntax.
43cae68 - n7nix, 3 days ago : Do not notify if package is not found.
dfbb23d - n7nix, 3 days ago : Add current/installed version compare & quiet output from apt-get.
19b52e6 - n7nix, 3 days ago : Get current gpsd version by parsing sorted web page.
4305d43 - n7nix, 3 days ago : Fix wrong program name & turn off debug.
c391303 - n7nix, 3 days ago : Remove excessive console output.
a1dd297 - n7nix, 3 days ago : Remove excessive console output.
a156355 - n7nix, 3 days ago : Add script to check gpsd version.
b36b8c9 - n7nix, 3 days ago : Add xastir and option to display current version numbers.
99f2e4c - n7nix, 3 days ago : Switch dir root to /usr/local since installed from source.
42690b5 - n7nix, 3 days ago : Change gpsd install file name to gp_install.sh
61cca96 - n7nix, 3 days ago : Add unmask for gpsd systemd file.
36a1299 - n7nix, 3 days ago : Display installed & latest source version numbers.
a72559f - n7nix, 3 days ago : Switch dir root to /usr/local since installed from source.
9854c38 - n7nix, 3 days ago : Challenged with the spelling of nmea get_lat_lon_nmeasentence
2a8f0ab - n7nix, 4 days ago : Change name of xastir install script to xs_install.sh
7357642 - n7nix, 4 days ago : Add script to stop DRAWS manager.
28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd sentences.
90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call.
7aee713 - n7nix, 4 days ago : Fix call to non existent function.
41345ee - n7nix, 4 days ago : Update current Xastir version number.
6a9c6d7 - n7nix, 7 days ago : Update WiFi hostap install/config scripts.
9cd94fe - n7nix, 7 days ago : Fix NMEA spelling.
2ce9433 - n7nix, 7 days ago : A Bryan's comment about resistor & ESD diode
f688ce1 - n7nix, 8 days ago : Get rid of duplicate lat/lon assignment.
772431d - n7nix, 8 days ago : Use nema sentences instead of gpsd sentences, parameterise lat/lon direction.
399aadd - n7nix, 8 days ago : Fix spelling.
9634129 - n7nix, 8 days ago : apt-get upgrade without prompt.
0fdce0c - n7nix, 10 days ago : Fix some mark down formatting
6a00b2b - n7nix, 10 days ago : Add notes on DRAWS auxilliary connector.
5821f4f - n7nix, 11 days ago : Fix GPS to APRS position format: Degrees Minutes.m
d30e51e - n7nix, 12 days ago : Update beacon commands to pull lat & lon from gpsd.
2a9afa4 - n7nix, 2 weeks ago : Add notes on using gpspipe.
1bd79a9 - n7nix, 2 weeks ago : Add apt-get update/upgrade.
356e16d - n7nix, 2 weeks ago : Don't print program name when checking if it exists.
13eba5a - n7nix, 2 weeks ago : Add script to update programs.
6095ac7 - n7nix, 2 weeks ago : Turn off debug output.
4a098bf - n7nix, 2 weeks ago : Clean-up some comments.
207fc35 - n7nix, 2 weeks ago : Fix js8call download URL, not https:
5590306 - n7nix, 2 weeks ago : Fix js8call download URL.

/Basil n7nix

2761 - 2780 of 5981