Date   
Re: paclink-unix incoming messages

Basil Gunn
 

I ran "app_config.sh plu" not "app_config.sh pluimap". So are the above
services configured? I haven't messed with any config
files you haven't specifically told me to modify.
The plu config script sets wl2k.conf like this:

## Set email=user_name@localhost

sed -i -e "s/^#email=.*/email=$USER@localhost/" $PLU_CFG_FILE

And your wl2k.conf file had your gmail account in it. How did that happen?

We verified with netstat -tulpn that nothing is listening on ports 143 or
993.
Can you determine if claws-mail has been installed?
Dovecot gets installed from claws-mail install script.
Is there a desktop icon for claws-mail?

If not perhaps that part of the script had a problem. Try installing claws-mail
separately and capture all the console output as user pi (not root)

cd
cd n7nix/email/claws
./claws_install.sh pi KF7DRV

I do see that pluweb is running. It seems to work fine to check outbox and
run wl2k*.
Good.
Can you determine if rainloop is installed?
In a browser type this url: localhost/?admin

/Basil

Re: paclink-unix incoming messages

Keith Williamson
 

I ran "app_config.sh plu" not "app_config.sh pluimap". So are the above services configured? I haven't messed with any config
files you haven't specifically told me to modify. 

We verified with netstat -tulpn that nothing is listening on ports 143 or 993. 

I do see that pluweb is running. It seems to work fine to check outbox and run wl2k*. 

-Keith

Virus-free. www.avg.com


On Tue, Jun 4, 2019 at 1:54 PM Basil Gunn <basil@...> wrote:

> Thanks..that would be great. Rainloop looks pretty nice.

I agree. Plus you can do everything in a browser including paclink-unix
access, VNC isn't necessarily needed for remote operation.

> For my use case, I'll generally be accessing winlink email from my laptop
> (XPS13 running Ubuntu 16.04). However, I'll also want to be able to access
> from RPi (although via VNC). I run all my RPi projects headless (except
> during initial bringup).
>
> It would seem that getting dovecot configured would be the best route.

If you installed paclink-unix then dovecot is already configured
... unless you decide to edit config files yourself.
The paclink-unix install, installs & configures: postfix, dovecot, mutt,
rainloop, claws-mail, nodejs & pluweb app.

> Then
> I could access email from either the laptop or RPi using rainloop.
>
> Does that make sense?

Yes. You have a number of options:
local=running on RPi
- local or remote console using mutt
- local or remote web browser using rainloop & plu web app.
- local or remote using VNC & claws-mail
- remote using your mobile device mail app & RPi in host AP mode and
accessing paclink-unix with the web app. (I use K9 mail on my Android)

/Basil



Re: paclink-unix incoming messages

Basil Gunn
 

Thanks..that would be great. Rainloop looks pretty nice.
I agree. Plus you can do everything in a browser including paclink-unix
access, VNC isn't necessarily needed for remote operation.

For my use case, I'll generally be accessing winlink email from my laptop
(XPS13 running Ubuntu 16.04). However, I'll also want to be able to access
from RPi (although via VNC). I run all my RPi projects headless (except
during initial bringup).

It would seem that getting dovecot configured would be the best route.
If you installed paclink-unix then dovecot is already configured
... unless you decide to edit config files yourself.
The paclink-unix install, installs & configures: postfix, dovecot, mutt,
rainloop, claws-mail, nodejs & pluweb app.

Then
I could access email from either the laptop or RPi using rainloop.

Does that make sense?
Yes. You have a number of options:
local=running on RPi
- local or remote console using mutt
- local or remote web browser using rainloop & plu web app.
- local or remote using VNC & claws-mail
- remote using your mobile device mail app & RPi in host AP mode and
accessing paclink-unix with the web app. (I use K9 mail on my Android)

/Basil

Re: Shipping and case updates?

August Johnson
 

I bought an "Early Adopter" aluminum case over a month ago, any status report on these?

August KG7BZ

On Tue, Jun 4, 2019 at 11:58 AM <chris@...> wrote:
It's been a couple of weeks since Hamvention, and I was hoping we could get an update on potential ship dates for outstanding DRAWS orders, including the aluminum cases (I bought the kit).

Thanks,
Chris
K1NOT 

Re: paclink-unix incoming messages

Keith Williamson
 

Thanks..that would be great. Rainloop looks pretty nice. 

For my use case, I'll generally be accessing winlink email from my laptop (XPS13 running Ubuntu 16.04). However, I'll also want to be able to access from RPi (although via VNC). I run all my RPi projects headless (except during initial bringup). 

It would seem that getting dovecot configured would be the best route. Then I could access email from either the laptop or RPi using rainloop. 

Does that make sense?

-Keith



Virus-free. www.avg.com


On Tue, Jun 4, 2019 at 12:01 PM Basil Gunn <basil@...> wrote:

> My configuration error was the "email" line in wl2k.conf.

Yes good catch. email=pi@localhost is what it should be.

> That resolved the issue. Getting used to mutt now. Have changed the default
> compose editor from nano to vi so that bit's easier now.

I would like to help get claws-mail (or rainloop) working for you.
Although mutt is the easiest to configure & get operational.

/Basil




Re: paclink-unix incoming messages

Basil Gunn
 

My configuration error was the "email" line in wl2k.conf.
Yes good catch. email=pi@localhost is what it should be.

That resolved the issue. Getting used to mutt now. Have changed the default
compose editor from nano to vi so that bit's easier now.
I would like to help get claws-mail (or rainloop) working for you.
Although mutt is the easiest to configure & get operational.

/Basil

Shipping and case updates?

Chris Metcalf
 

It's been a couple of weeks since Hamvention, and I was hoping we could get an update on potential ship dates for outstanding DRAWS orders, including the aluminum cases (I bought the kit).

Thanks,
Chris
K1NOT 

Re: paclink-unix incoming messages

Keith Williamson
 

Hi,

My configuration error was the "email" line in wl2k.conf. While trying to solve the winlink authentication issue, I had changed that to my gmail address to match the setting in Winlink Express.

Now I've changed the line in wl2k.conf to:
email=pi@localhost

That resolved the issue. Getting used to mutt now. Have changed the default compose editor from nano to vi so that bit's easier now.

Thanks a ton, Basil, for all your support and the great work you've done integrating paclink-unix into the DRAWS/UDRC images!

-Keith
KF7DRV




On Tue, Jun 4, 2019 at 10:24 AM Keith Williamson via Groups.Io <hkwilliamson=gmail.com@groups.io> wrote:
Hi Basil,

Some additional information. It appears that when I run wl2ktelnet multiple times, your last message to me via winlink alternates between getting delivered to the outbox and then getting deleted from the outbox. When the message gets posted to the outbox, there is an attempt to deliver it via sendmail to my gmail account. That doesn't seem right. Perhaps a clue to what's misconfigured?

Thanks,

Keith

pi@Compass:/usr/local/var/wl2k/outbox $ chk_perm.sh
=== test owner & group id of outbox directory
permissions OK: pi:mail
No files in outbox
pi@Compass:/usr/local/var/wl2k/outbox $ wl2ktelnet
Connecting to cms.winlink.org 8772 ...
Connected.

Callsign : KF7DRV
Password :
wl2ktelnet: ---

wl2ktelnet: <[WL2K-5.0-B2FWIHJM$]
wl2ktelnet: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2ktelnet: <;PQ: 21821914
wl2ktelnet: Challenge received: 21821914
wl2ktelnet: <CMS>
wl2ktelnet: >[UnixLINK-0.8-B2FIHM$]
wl2ktelnet: >;PR: 65471671
wl2ktelnet: >; WL2K DE KF7DRV QTC 0
wl2ktelnet: >FF
wl2ktelnet: <;PM: KF7DRV BABW6_KF7DRV 279 N7NIX@... Re: //WL2K Compass plu 06/03/19, size: 32, #0 [92]
wl2ktelnet: <FC EM BABW6_KF7DRV 334 279 0 [28]
wl2ktelnet: proposal code C type E mid BABW6_KF7DRV usize 334 csize 279 next (nil) path (null) ubuf (nil) cbuf (nil)
wl2ktelnet: <F> 67 [5]
wl2ktelnet: sentcksum=67 proposalcksum=67
wl2ktelnet: 1 proposal received
wl2ktelnet: >FS Y
wl2ktelnet: title: Re: //WL2K Compass plu 06/03/19, size: 32, #0
wl2ktelnet: offset: 0
wl2ktelnet: STX
wl2ktelnet: len 250
wl2ktelnet: STX
wl2ktelnet: len 29
wl2ktelnet: EOT
wl2ktelnet: extracting...
wl2ktelnet: calling sendmail for delivery: /usr/sbin/sendmail -bm hkwilliamson@...
wl2ktelnet: delivery completed
wl2ktelnet: >FF
wl2ktelnet: <FQ [2]
pi@Compass:/usr/local/var/wl2k/outbox $ chk_perm.sh
=== test owner & group id of outbox directory
permissions OK: pi:mail
1 files in outbox
pi@Compass:/usr/local/var/wl2k/outbox $ wl2ktelnet
Connecting to cms.winlink.org 8772 ...
Connected.

Callsign : KF7DRV
Password :
wl2ktelnet: ---
 outbound proposal list
wl2ktelnet: proposal code C type E mid 5CYU8_KF7DRV usize 383 csize 301 next (nil) path 5CYU8_KF7DRV ubuf 0xc37a8 cbuf 0xc3658
wl2ktelnet: <[WL2K-5.0-B2FWIHJM$]
wl2ktelnet: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2ktelnet: <;PQ: 18225741
wl2ktelnet: Challenge received: 18225741
wl2ktelnet: <CMS>
wl2ktelnet: >[UnixLINK-0.8-B2FIHM$]
wl2ktelnet: >;PR: 75288794
wl2ktelnet: >; WL2K DE KF7DRV QTC 1
wl2ktelnet: >FC EM 5CYU8_KF7DRV 383 301 0
wl2ktelnet: >F> 65
wl2ktelnet: <FS Y
wl2ktelnet: transmitting [Re: //WL2K Compass plu 06/03/19, size: 32, #0] [offset 0]
wl2ktelnet: ... 301
wl2ktelnet: ... 46
wl2ktelnet: <FF [2]
wl2ktelnet: DELETING PROPOSAL:
wl2ktelnet: proposal code C type E mid 5CYU8_KF7DRV usize 383 csize 301 next (nil) path 5CYU8_KF7DRV ubuf 0xc37a8 cbuf 0xc3658
wl2ktelnet: >FQ
pi@Compass:/usr/local/var/wl2k/outbox $ chk_perm.sh
=== test owner & group id of outbox directory
permissions OK: pi:mail
No files in outbox
pi@Compass:/usr/local/var/wl2k/outbox $

On Tue, Jun 4, 2019 at 7:53 AM Keith Williamson via Groups.Io <hkwilliamson=gmail.com@groups.io> wrote:
Sorry..I had cleaned it out again.

The email message you sent is now in the outbox:

pi@Compass:/usr/local/var/wl2k/outbox $
pi@Compass:/usr/local/var/wl2k/outbox $ cat BWU7Q_KF7DRV
Mid: BWU7Q_KF7DRV
Date: 2019/06/04 05:55
Type: Private
From: SMTP:N7NIX@...
To: SMTP:KF7DRV@...
Subject: Re: //WL2K Compass plu 06/03/19, size: 32, #0
Mbo: N7NIX
Body: 185

I received both of your test messages sent just before 5pm Monday.
/Basil

On Mon, Jun 03, 2019 at 11:50:00PM +0000, KF7DRV@... wrote:
> Sent on: 06/03 16:50:42 PDT
> /pi
pi@Compass:/usr/local/var/wl2k/outbox $


Repeating the directory listings:

pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
total 12
drwxrwsr-x 2 pi mail 4096 Jun  4 07:28 .
-rw------- 1 pi mail  383 Jun  4 07:28 BWU7Q_KF7DRV
drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
pi@Compass:~ $
pi@Compass:~ $ ls -alt ~/Mail/
total 48
drwxr-xr-x 40 pi pi 4096 Jun  4 07:23 ..
drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
-rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
drwx------  2 pi pi 4096 Jun  3 14:57 queue
drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
drwx------  2 pi pi 4096 Jun  3 11:00 draft
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
pi@Compass:~ $


There are no messages in mutt. Is there a mutt command to retrieve email?

-Keith

On Tue, Jun 4, 2019 at 7:35 AM Basil Gunn <basil@...> wrote:

There are no incoming messages in your outbox.
Why do you think there are?

Can you reply to the winlink email I sent to you with mutt?

/Basil

Keith Williamson <hkwilliamson@...> writes:

> Here you go:
>
> pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
> total 8
> drwxrwsr-x 2 pi mail 4096 Jun  3 16:50 .
> drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
> pi@Compass:~ $ ls -alt ~/Mail/
> total 48
> drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
> drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
> drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
> -rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
> drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
> drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
> drwxr-xr-x 39 pi pi 4096 Jun  3 16:00 ..
> drwx------  2 pi pi 4096 Jun  3 14:57 queue
> drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
> drwx------  2 pi pi 4096 Jun  3 11:00 draft
> drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
> drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
> drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
> pi@Compass:~ $
>
> -Keith
>
> On Mon, Jun 3, 2019 at 10:43 PM Basil Gunn <basil@...> wrote:
>
>> With respect to incoming messages ending up in
>> /usr/local/var/wl2k/output/, I don't know how to fix that. I thought that
>> postfix was configured correctly by the scripts.
>>
>> It is. I just tried a new install & things work the way I expect. Send me
>> the output of these commands.
>>
>> ls -alt /usr/local/var/wl2k/outbox
>> ls -alt ~/Mail/
>>
>> Is it possible that building the latest paclink-unix broke the postfix
>> config? No /Basil
>>
>>
>>
>>
>
>




Re: paclink-unix incoming messages

Keith Williamson
 

Hi Basil,

Some additional information. It appears that when I run wl2ktelnet multiple times, your last message to me via winlink alternates between getting delivered to the outbox and then getting deleted from the outbox. When the message gets posted to the outbox, there is an attempt to deliver it via sendmail to my gmail account. That doesn't seem right. Perhaps a clue to what's misconfigured?

Thanks,

Keith

pi@Compass:/usr/local/var/wl2k/outbox $ chk_perm.sh
=== test owner & group id of outbox directory
permissions OK: pi:mail
No files in outbox
pi@Compass:/usr/local/var/wl2k/outbox $ wl2ktelnet
Connecting to cms.winlink.org 8772 ...
Connected.

Callsign : KF7DRV
Password :
wl2ktelnet: ---

wl2ktelnet: <[WL2K-5.0-B2FWIHJM$]
wl2ktelnet: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2ktelnet: <;PQ: 21821914
wl2ktelnet: Challenge received: 21821914
wl2ktelnet: <CMS>
wl2ktelnet: >[UnixLINK-0.8-B2FIHM$]
wl2ktelnet: >;PR: 65471671
wl2ktelnet: >; WL2K DE KF7DRV QTC 0
wl2ktelnet: >FF
wl2ktelnet: <;PM: KF7DRV BABW6_KF7DRV 279 N7NIX@... Re: //WL2K Compass plu 06/03/19, size: 32, #0 [92]
wl2ktelnet: <FC EM BABW6_KF7DRV 334 279 0 [28]
wl2ktelnet: proposal code C type E mid BABW6_KF7DRV usize 334 csize 279 next (nil) path (null) ubuf (nil) cbuf (nil)
wl2ktelnet: <F> 67 [5]
wl2ktelnet: sentcksum=67 proposalcksum=67
wl2ktelnet: 1 proposal received
wl2ktelnet: >FS Y
wl2ktelnet: title: Re: //WL2K Compass plu 06/03/19, size: 32, #0
wl2ktelnet: offset: 0
wl2ktelnet: STX
wl2ktelnet: len 250
wl2ktelnet: STX
wl2ktelnet: len 29
wl2ktelnet: EOT
wl2ktelnet: extracting...
wl2ktelnet: calling sendmail for delivery: /usr/sbin/sendmail -bm hkwilliamson@...
wl2ktelnet: delivery completed
wl2ktelnet: >FF
wl2ktelnet: <FQ [2]
pi@Compass:/usr/local/var/wl2k/outbox $ chk_perm.sh
=== test owner & group id of outbox directory
permissions OK: pi:mail
1 files in outbox
pi@Compass:/usr/local/var/wl2k/outbox $ wl2ktelnet
Connecting to cms.winlink.org 8772 ...
Connected.

Callsign : KF7DRV
Password :
wl2ktelnet: ---
 outbound proposal list
wl2ktelnet: proposal code C type E mid 5CYU8_KF7DRV usize 383 csize 301 next (nil) path 5CYU8_KF7DRV ubuf 0xc37a8 cbuf 0xc3658
wl2ktelnet: <[WL2K-5.0-B2FWIHJM$]
wl2ktelnet: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2ktelnet: <;PQ: 18225741
wl2ktelnet: Challenge received: 18225741
wl2ktelnet: <CMS>
wl2ktelnet: >[UnixLINK-0.8-B2FIHM$]
wl2ktelnet: >;PR: 75288794
wl2ktelnet: >; WL2K DE KF7DRV QTC 1
wl2ktelnet: >FC EM 5CYU8_KF7DRV 383 301 0
wl2ktelnet: >F> 65
wl2ktelnet: <FS Y
wl2ktelnet: transmitting [Re: //WL2K Compass plu 06/03/19, size: 32, #0] [offset 0]
wl2ktelnet: ... 301
wl2ktelnet: ... 46
wl2ktelnet: <FF [2]
wl2ktelnet: DELETING PROPOSAL:
wl2ktelnet: proposal code C type E mid 5CYU8_KF7DRV usize 383 csize 301 next (nil) path 5CYU8_KF7DRV ubuf 0xc37a8 cbuf 0xc3658
wl2ktelnet: >FQ
pi@Compass:/usr/local/var/wl2k/outbox $ chk_perm.sh
=== test owner & group id of outbox directory
permissions OK: pi:mail
No files in outbox
pi@Compass:/usr/local/var/wl2k/outbox $


On Tue, Jun 4, 2019 at 7:53 AM Keith Williamson via Groups.Io <hkwilliamson=gmail.com@groups.io> wrote:
Sorry..I had cleaned it out again.

The email message you sent is now in the outbox:

pi@Compass:/usr/local/var/wl2k/outbox $
pi@Compass:/usr/local/var/wl2k/outbox $ cat BWU7Q_KF7DRV
Mid: BWU7Q_KF7DRV
Date: 2019/06/04 05:55
Type: Private
From: SMTP:N7NIX@...
To: SMTP:KF7DRV@...
Subject: Re: //WL2K Compass plu 06/03/19, size: 32, #0
Mbo: N7NIX
Body: 185

I received both of your test messages sent just before 5pm Monday.
/Basil

On Mon, Jun 03, 2019 at 11:50:00PM +0000, KF7DRV@... wrote:
> Sent on: 06/03 16:50:42 PDT
> /pi
pi@Compass:/usr/local/var/wl2k/outbox $


Repeating the directory listings:

pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
total 12
drwxrwsr-x 2 pi mail 4096 Jun  4 07:28 .
-rw------- 1 pi mail  383 Jun  4 07:28 BWU7Q_KF7DRV
drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
pi@Compass:~ $
pi@Compass:~ $ ls -alt ~/Mail/
total 48
drwxr-xr-x 40 pi pi 4096 Jun  4 07:23 ..
drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
-rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
drwx------  2 pi pi 4096 Jun  3 14:57 queue
drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
drwx------  2 pi pi 4096 Jun  3 11:00 draft
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
pi@Compass:~ $


There are no messages in mutt. Is there a mutt command to retrieve email?

-Keith

On Tue, Jun 4, 2019 at 7:35 AM Basil Gunn <basil@...> wrote:

There are no incoming messages in your outbox.
Why do you think there are?

Can you reply to the winlink email I sent to you with mutt?

/Basil

Keith Williamson <hkwilliamson@...> writes:

> Here you go:
>
> pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
> total 8
> drwxrwsr-x 2 pi mail 4096 Jun  3 16:50 .
> drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
> pi@Compass:~ $ ls -alt ~/Mail/
> total 48
> drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
> drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
> drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
> -rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
> drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
> drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
> drwxr-xr-x 39 pi pi 4096 Jun  3 16:00 ..
> drwx------  2 pi pi 4096 Jun  3 14:57 queue
> drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
> drwx------  2 pi pi 4096 Jun  3 11:00 draft
> drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
> drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
> drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
> pi@Compass:~ $
>
> -Keith
>
> On Mon, Jun 3, 2019 at 10:43 PM Basil Gunn <basil@...> wrote:
>
>> With respect to incoming messages ending up in
>> /usr/local/var/wl2k/output/, I don't know how to fix that. I thought that
>> postfix was configured correctly by the scripts.
>>
>> It is. I just tried a new install & things work the way I expect. Send me
>> the output of these commands.
>>
>> ls -alt /usr/local/var/wl2k/outbox
>> ls -alt ~/Mail/
>>
>> Is it possible that building the latest paclink-unix broke the postfix
>> config? No /Basil
>>
>>
>>
>>
>
>




Re: DRAWS and Allstar?

 

The draws board can go ALSA or Pulse Audio.

Pulse audio maps left and right connectors as separate mono alsa devices. 



On Tue, Jun 4, 2019, 09:25 Steve KC1AWV <smiller@...> wrote:
So, I've given this some more thought. you could probably do this through chan_alsa, chan_oss, or chan_usrp depending on how DRAWS configures its sound card.

Easiest would be GNU Radio USRP, the set up would be similar to that as DVSwitch.

On Tue, Jun 4, 2019 at 12:17 PM Christopher AI6KG <ch@...> wrote:
The issue I see is not with the Allstar distribution, but rather getting DRAWS to show up as a compatible device for app_rpt.

Agreed.  This is essentially what I was asking.

-ch
73 de AI6KG

 

On Sun, Jun 2, 2019 at 8:04 PM Steve KC1AWV <smiller@...> wrote:
"Allstar without the attached OS" is just Asterisk with app_rpt. Asterisk runs on many OSes - Linux, BSD, Windows, etc... Just need to compile it with app_rpt.

Allstar takes it a step further, building a network on top of Asterisk and app_rpt. They provide a distribution of Debian with Asterisk and app_rpt pre compiled, with all the heavy lifting and configuration already done. You could do it all yourself, but why when you can save time with the distro?

The issue I see is not with the Allstar distribution, but rather getting DRAWS to show up as a compatible device for app_rpt. The URIx and other similar radio interface were specifically designed for Allstar, IRLP and the like.

A driver may be needed for use with Allstar. If this is something that a lot of people are interested in, I could take a stab at it. Just need to dedicate the time and a board. Though, I feel that the exercise may be a little in vain, using DRAWS for just going from a radio to Allstar is seriously limiting the power and capabilities of the board. A URIx would be easier, since it's the right tools for the job kind of thing. Plus, it's cheaper than a DRAWS board.

Steve KC1AWV


On Sun, Jun 2, 2019, 10:24 PM Anthony Leeser <tagtynee@...> wrote:

Hello Christopher 

That's a very good question. I've been working on that for sometime. I didn't want to tie up and dedicate a RPi solely for Allstar. I wanted to do HF digital as well. I've been working on this project for about a year. The introduction of DRAWS changed my entire build... ugh. Unless I overlooked a possible workaround, only thing I haven't tried was requesting to get the Allstar software without the attached operating system. If that's possible, I don't see why DRAWS and Allstar can't be friendly neighbors one one operating system.

Tony
AG7GF 


Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: Christopher AI6KG <ch@...>
Date: 6/2/19 5:02 PM (GMT-08:00)
Subject: [udrc] DRAWS and Allstar?

Has anyone gotten Allstar running with DRAWS (or UDRC)?    I saw the thread re: URI but my aim is to use DRAWS rather than URI.

-christopher.

73 de AI6KG



--
Steve Miller
KC1AWV

Re: DRAWS and Allstar?

Steve KC1AWV
 

So, I've given this some more thought. you could probably do this through chan_alsa, chan_oss, or chan_usrp depending on how DRAWS configures its sound card.

Easiest would be GNU Radio USRP, the set up would be similar to that as DVSwitch.

On Tue, Jun 4, 2019 at 12:17 PM Christopher AI6KG <ch@...> wrote:
The issue I see is not with the Allstar distribution, but rather getting DRAWS to show up as a compatible device for app_rpt.

Agreed.  This is essentially what I was asking.

-ch
73 de AI6KG

 

On Sun, Jun 2, 2019 at 8:04 PM Steve KC1AWV <smiller@...> wrote:
"Allstar without the attached OS" is just Asterisk with app_rpt. Asterisk runs on many OSes - Linux, BSD, Windows, etc... Just need to compile it with app_rpt.

Allstar takes it a step further, building a network on top of Asterisk and app_rpt. They provide a distribution of Debian with Asterisk and app_rpt pre compiled, with all the heavy lifting and configuration already done. You could do it all yourself, but why when you can save time with the distro?

The issue I see is not with the Allstar distribution, but rather getting DRAWS to show up as a compatible device for app_rpt. The URIx and other similar radio interface were specifically designed for Allstar, IRLP and the like.

A driver may be needed for use with Allstar. If this is something that a lot of people are interested in, I could take a stab at it. Just need to dedicate the time and a board. Though, I feel that the exercise may be a little in vain, using DRAWS for just going from a radio to Allstar is seriously limiting the power and capabilities of the board. A URIx would be easier, since it's the right tools for the job kind of thing. Plus, it's cheaper than a DRAWS board.

Steve KC1AWV


On Sun, Jun 2, 2019, 10:24 PM Anthony Leeser <tagtynee@...> wrote:

Hello Christopher 

That's a very good question. I've been working on that for sometime. I didn't want to tie up and dedicate a RPi solely for Allstar. I wanted to do HF digital as well. I've been working on this project for about a year. The introduction of DRAWS changed my entire build... ugh. Unless I overlooked a possible workaround, only thing I haven't tried was requesting to get the Allstar software without the attached operating system. If that's possible, I don't see why DRAWS and Allstar can't be friendly neighbors one one operating system.

Tony
AG7GF 


Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: Christopher AI6KG <ch@...>
Date: 6/2/19 5:02 PM (GMT-08:00)
Subject: [udrc] DRAWS and Allstar?

Has anyone gotten Allstar running with DRAWS (or UDRC)?    I saw the thread re: URI but my aim is to use DRAWS rather than URI.

-christopher.

73 de AI6KG



--
Steve Miller
KC1AWV

Re: DRAWS and Allstar?

Christopher AI6KG
 

The issue I see is not with the Allstar distribution, but rather getting DRAWS to show up as a compatible device for app_rpt.

Agreed.  This is essentially what I was asking.

-ch
73 de AI6KG

 

On Sun, Jun 2, 2019 at 8:04 PM Steve KC1AWV <smiller@...> wrote:
"Allstar without the attached OS" is just Asterisk with app_rpt. Asterisk runs on many OSes - Linux, BSD, Windows, etc... Just need to compile it with app_rpt.

Allstar takes it a step further, building a network on top of Asterisk and app_rpt. They provide a distribution of Debian with Asterisk and app_rpt pre compiled, with all the heavy lifting and configuration already done. You could do it all yourself, but why when you can save time with the distro?

The issue I see is not with the Allstar distribution, but rather getting DRAWS to show up as a compatible device for app_rpt. The URIx and other similar radio interface were specifically designed for Allstar, IRLP and the like.

A driver may be needed for use with Allstar. If this is something that a lot of people are interested in, I could take a stab at it. Just need to dedicate the time and a board. Though, I feel that the exercise may be a little in vain, using DRAWS for just going from a radio to Allstar is seriously limiting the power and capabilities of the board. A URIx would be easier, since it's the right tools for the job kind of thing. Plus, it's cheaper than a DRAWS board.

Steve KC1AWV


On Sun, Jun 2, 2019, 10:24 PM Anthony Leeser <tagtynee@...> wrote:

Hello Christopher 

That's a very good question. I've been working on that for sometime. I didn't want to tie up and dedicate a RPi solely for Allstar. I wanted to do HF digital as well. I've been working on this project for about a year. The introduction of DRAWS changed my entire build... ugh. Unless I overlooked a possible workaround, only thing I haven't tried was requesting to get the Allstar software without the attached operating system. If that's possible, I don't see why DRAWS and Allstar can't be friendly neighbors one one operating system.

Tony
AG7GF 


Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: Christopher AI6KG <ch@...>
Date: 6/2/19 5:02 PM (GMT-08:00)
Subject: [udrc] DRAWS and Allstar?

Has anyone gotten Allstar running with DRAWS (or UDRC)?    I saw the thread re: URI but my aim is to use DRAWS rather than URI.

-christopher.

73 de AI6KG

Re: ThumbDV Issue

Eduardo Gallegos
 

Thanks John.

Regards

Eduardo
XE2JEG


On Jun 3, 2019, at 3:20 PM, John D Hays - K7VE <john@...> wrote:

Forwarded to Anna, NH6Z, Buster's author.

On Mon, Jun 3, 2019, 14:17 Eduardo Gallegos via Groups.Io <xe2jeg=me.com@groups.io> wrote:
Hi...

I am running a ThumbDV device on a Mac with Buster software but now I can’t connect to few Reflectors like 1C, 12A or 30C.  I CAN connect to few others but not he ones that I mention.

I am a register user on D-Star.

Any help will be greatly appreciated.

Regards,

Eduardo Gallegos
XE2JEG




Re: paclink-unix incoming messages

Keith Williamson
 

Sorry..I had cleaned it out again.

The email message you sent is now in the outbox:

pi@Compass:/usr/local/var/wl2k/outbox $
pi@Compass:/usr/local/var/wl2k/outbox $ cat BWU7Q_KF7DRV
Mid: BWU7Q_KF7DRV
Date: 2019/06/04 05:55
Type: Private
From: SMTP:N7NIX@...
To: SMTP:KF7DRV@...
Subject: Re: //WL2K Compass plu 06/03/19, size: 32, #0
Mbo: N7NIX
Body: 185

I received both of your test messages sent just before 5pm Monday.
/Basil

On Mon, Jun 03, 2019 at 11:50:00PM +0000, KF7DRV@... wrote:
> Sent on: 06/03 16:50:42 PDT
> /pi
pi@Compass:/usr/local/var/wl2k/outbox $


Repeating the directory listings:

pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
total 12
drwxrwsr-x 2 pi mail 4096 Jun  4 07:28 .
-rw------- 1 pi mail  383 Jun  4 07:28 BWU7Q_KF7DRV
drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
pi@Compass:~ $
pi@Compass:~ $ ls -alt ~/Mail/
total 48
drwxr-xr-x 40 pi pi 4096 Jun  4 07:23 ..
drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
-rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
drwx------  2 pi pi 4096 Jun  3 14:57 queue
drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
drwx------  2 pi pi 4096 Jun  3 11:00 draft
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
pi@Compass:~ $


There are no messages in mutt. Is there a mutt command to retrieve email?

-Keith

On Tue, Jun 4, 2019 at 7:35 AM Basil Gunn <basil@...> wrote:

There are no incoming messages in your outbox.
Why do you think there are?

Can you reply to the winlink email I sent to you with mutt?

/Basil

Keith Williamson <hkwilliamson@...> writes:

> Here you go:
>
> pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
> total 8
> drwxrwsr-x 2 pi mail 4096 Jun  3 16:50 .
> drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
> pi@Compass:~ $ ls -alt ~/Mail/
> total 48
> drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
> drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
> drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
> -rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
> drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
> drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
> drwxr-xr-x 39 pi pi 4096 Jun  3 16:00 ..
> drwx------  2 pi pi 4096 Jun  3 14:57 queue
> drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
> drwx------  2 pi pi 4096 Jun  3 11:00 draft
> drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
> drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
> drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
> pi@Compass:~ $
>
> -Keith
>
> On Mon, Jun 3, 2019 at 10:43 PM Basil Gunn <basil@...> wrote:
>
>> With respect to incoming messages ending up in
>> /usr/local/var/wl2k/output/, I don't know how to fix that. I thought that
>> postfix was configured correctly by the scripts.
>>
>> It is. I just tried a new install & things work the way I expect. Send me
>> the output of these commands.
>>
>> ls -alt /usr/local/var/wl2k/outbox
>> ls -alt ~/Mail/
>>
>> Is it possible that building the latest paclink-unix broke the postfix
>> config? No /Basil
>>
>>
>>
>>
>
>




Re: auto-rmsgw-find

Keith Williamson
 

Hi Basil,

No gps..just UDRC.

However, looks like this is working correctly now:

pi@Compass:~/auto-rmsgw-find $ rm ~/tmp/rmsgwprox.*
pi@Compass:~/auto-rmsgw-find $ ./wlgw-check.sh -g CN88tu
Using existing /home/pi/tmp/rmsgw_stats.log

Refreshing RMS List

RMS GW proximity file has changed
wc: /home/pi/tmp/rmsgwprox.bak: No such file or directory
New proximity file has 12 entries, old file has
Using VFOA as data radio
In Mem channel mode
Current Chan: 3, name: LKOUT, chan freq: 146.5, Frequency: 144930000

Start: 2019 06 04 07:27:02 PDT: grid: CN88tu, debug: , GW list refresh: true, connect: true, cron: false

Chan Conn
RMS GW    Freq Dist Name Index Stat Stat Time  Conn
Connected to AX.25 stack
Child process
wl2kax25: ---

wl2kax25: <[WL2K-5.0-B2FWIHJM$]
wl2kax25: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2kax25: <;PQ: 14728660
wl2kax25: Challenge received: 14728660
wl2kax25: <CMS via KC7OAS >
wl2kax25: >[UnixLINK-0.8-B2FIHM$]
wl2kax25: >;PR: 20191930
wl2kax25: >; KC7OAS-10 DE KF7DRV QTC 0
wl2kax25: >FF
wl2kax25: <;PM: KF7DRV 7GF5QC_N7NIX 280 N7NIX@... Re: //WL2K Compass plu 06/03/19, size: 32, #0 [92]
wl2kax25: <FC EM 7GF5QC_N7NIX 334 280 0 [28]
wl2kax25: proposal code C type E mid 7GF5QC_N7NIX usize 334 csize 280 next (nil) path (null) ubuf (nil) cbuf (nil)
wl2kax25: <F> 74 [5]
wl2kax25: sentcksum=74 proposalcksum=74
wl2kax25: 1 proposal received
wl2kax25: >FS Y
wl2kax25: title: Re: //WL2K Compass plu 06/03/19, size: 32, #0
wl2kax25: offset: 0
wl2kax25: STX
wl2kax25: len 250
wl2kax25: STX
wl2kax25: len 30
wl2kax25: EOT
wl2kax25: extracting...
wl2kax25: calling sendmail for delivery: /usr/sbin/sendmail -bm hkwilliamson@...
wl2kax25: delivery completed
wl2kax25: >FF
wl2kax25: <FQ [2]
Child process exiting
EOF on child fd, terminating communications loop.
Closing ax25 connection
Child exit status: 0
Waiting for AX25 peer ... timeout
KC7OAS-10   144950000 8 NET-12          n/a  OK 47   4
Connected to AX.25 stack
Child process
wl2kax25: ---
 outbound proposal list
wl2kax25: proposal code C type E mid STLRF_KF7DRV usize 383 csize 300 next (nil) path STLRF_KF7DRV ubuf 0xf78ba0 cbuf 0xf649b8
wl2kax25: <W7ECG-10 - Linux RMS Gateway 2.5.0 Dec 21 2018 (CN88rt)    **** WECG RMS Gateway ****    INFO: Host Name cms.winlink.org, Port 8772
wl2kax25: <Connected
wl2kax25: <[WL2K-5.0-B2FWIHJM$]
wl2kax25: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2kax25: <;PQ: 41357213
wl2kax25: Challenge received: 41357213
wl2kax25: <CMS via W7ECG-10 >
wl2kax25: >[UnixLINK-0.8-B2FIHM$]
wl2kax25: >;PR: 65853655
wl2kax25: >; W7ECG-10 DE KF7DRV QTC 1
wl2kax25: >FC EM STLRF_KF7DRV 383 300 0
wl2kax25: >F> 39
wl2kax25: <FS Y
wl2kax25: transmitting [Re: //WL2K Compass plu 06/03/19, size: 32, #0] [offset 0]
wl2kax25: ... 300
wl2kax25: ... 45
wl2kax25: <FF [2]
wl2kax25: DELETING PROPOSAL:
wl2kax25: proposal code C type E mid STLRF_KF7DRV usize 383 csize 300 next (nil) path STLRF_KF7DRV ubuf 0xf78ba0 cbuf 0xf649b8
wl2kax25: >FQ
Child process exiting
EOF on child fd, terminating communications loop.
Closing ax25 connection
Child exit status: 0
Waiting for AX25 peer ... disconnected
W7ECG-10    144930000 8 NET-17          n/a  OK 26   4
Connected to AX.25 stack
Child process
wl2kax25: ---

wl2kax25: <KF7VOL-10 - Linux RMS Gateway 2.5.0 Dec 21 2018 (CN88SX)    **** Keyed Up RMS Gateway ****    INFO: Host Name cms.winlink.org, Port 8772
wl2kax25: <Connected
wl2kax25: <[WL2K-5.0-B2FWIHJM$]
wl2kax25: sid [WL2K-5.0-B2FWIHJM$] inboundsidcodes -B2FWIHJM$
wl2kax25: <;PQ: 71451109
wl2kax25: Challenge received: 71451109
wl2kax25: <CMS via KF7VOL-10 >
wl2kax25: >[UnixLINK-0.8-B2FIHM$]
wl2kax25: >;PR: 29618764
wl2kax25: >; KF7VOL-10 DE KF7DRV QTC 0
wl2kax25: >FF
wl2kax25: <;PM: KF7DRV STLRF_KF7DRV 279 N7NIX@... Re: //WL2K Compass plu 06/03/19, size: 32, #0 [92]
wl2kax25: <FC EM STLRF_KF7DRV 334 279 0 [28]
wl2kax25: proposal code C type E mid STLRF_KF7DRV usize 334 csize 279 next (nil) path (null) ubuf (nil) cbuf (nil)
wl2kax25: <F> 2E [5]
wl2kax25: sentcksum=2E proposalcksum=2E
wl2kax25: 1 proposal received
wl2kax25: >FS Y
wl2kax25: title: Re: //WL2K Compass plu 06/03/19, size: 32, #0
wl2kax25: offset: 0
wl2kax25: STX
wl2kax25: len 250
wl2kax25: STX
wl2kax25: len 29
wl2kax25: EOT
wl2kax25: extracting...
wl2kax25: calling sendmail for delivery: /usr/sbin/sendmail -bm hkwilliamson@...
wl2kax25: delivery completed
wl2kax25: >FF
wl2kax25: <FQ [2]
Child process exiting
EOF on child fd, terminating communications loop.
Closing ax25 connection
Child exit status: 0
Waiting for AX25 peer ... disconnected
KF7VOL-10   145010000 9 NET111          n/a  OK 26   1
connect(): Connection timed out

Call to wl2kax25 timed out

NG2G-10     144990000 9 NET-11          n/a  to 22   1
connect(): Connection timed out

Call to wl2kax25 timed out

W7RE-10     147420000 12 unknown          Err  to 23   0
VA7TSA      7101000 15 unknown       Unqual n/a  0   0
  Pause for a bit, gateway count: 5, modulo 5 0
VA7TSA      14109000 15 unknown       Unqual n/a  0   0
  Pause for a bit, gateway count: 5, modulo 5 0
connect(): Connection timed out

Call to wl2kax25 timed out

VA7TSA-10   144970000 15 NET-15          n/a  to 23   0
connect(): Connection timed out

Call to wl2kax25 timed out

VA7TSA-10   145030000 15 NET112          n/a  to 23   0
connect(): Connection timed out

Call to wl2kax25 timed out

VE7ECC-10   144360000 15 unknown          Err  to 21   0
connect(): Connection timed out

Call to wl2kax25 timed out

W7BPD-10    145630000 17 NET-13          n/a  to 22   1
connect(): Connection timed out

Call to wl2kax25 timed out

W7BPD-11    145630000 17 NET-13          n/a  to 22   2
  Pause for a bit, gateway count: 10, modulo 5 0
Number of gateways: in array: 14, in list 12 /home/pi/tmp/rmsgwprox.txt

Finish: 2019 06 04 07:31:23 PDT: Elapsed time: 4 min, 21 secs,  Found 10 RMS Gateways, connected: 3

Setting radio back to original memory channel 3
pi@Compass:~/auto-rmsgw-find $
pi@Compass:~/auto-rmsgw-find $
pi@Compass:~/auto-rmsgw-find $ ./show_log.sh
Using date: 2019 06 04, starting at line number: 146, numb_lines: 17
Start: 2019 06 04 07:27:02 PDT: grid: CN88tu, debug: , GW list refresh: true, connect: true, cron: false

Chan Conn
RMS GW    Freq Dist Name Index Stat Stat Time  Conn
KC7OAS-10   144950000 8 NET-12          n/a  OK 47   4
W7ECG-10    144930000 8 NET-17          n/a  OK 26   4
KF7VOL-10   145010000 9 NET111          n/a  OK 26   1
NG2G-10     144990000 9 NET-11          n/a  to 22   1
W7RE-10     147420000 12 unknown          Err  to 23   0
VA7TSA      7101000 15 unknown       Unqual n/a  0   0
VA7TSA      14109000 15 unknown       Unqual n/a  0   0
VA7TSA-10   144970000 15 NET-15          n/a  to 23   0
VA7TSA-10   145030000 15 NET112          n/a  to 23   0
VE7ECC-10   144360000 15 unknown          Err  to 21   0
W7BPD-10    145630000 17 NET-13          n/a  to 22   1
W7BPD-11    145630000 17 NET-13          n/a  to 22   2
Finish: 2019 06 04 07:31:23 PDT: Elapsed time: 4 min, 21 secs,  Found 10 RMS Gateways, connected: 3
pi@Compass:~/auto-rmsgw-find $
pi@Compass:~/auto-rmsgw-find $
pi@Compass:~/auto-rmsgw-find $ rmslist.sh
Proximity file is: 0 hours 7 minute(s), 40 seconds old
Using existing proximity file with unknown grid_square

  Callsign       Frequency  Distance    Baud
 KC7OAS-10 144950000 8 1200
 W7ECG-10   144930000 8 1200
 KF7VOL-10 145010000 9 1200
 NG2G-10   144990000 9 1200
 W7RE-10   147420000 12 1200
 VA7TSA       7101000 15 600
 VA7TSA      14109000 15 600
 VA7TSA-10 144970000 15 1200
 VA7TSA-10 145030000 15 1200
 VE7ECC-10 144360000 15 1200
 W7BPD-10   145630000 17 1200
 W7BPD-11   145630000 17 1200
pi@Compass:~/auto-rmsgw-find $
pi@Compass:~/auto-rmsgw-find $
pi@Compass:~/auto-rmsgw-find $


-Keith

Virus-free. www.avg.com

On Mon, Jun 3, 2019 at 10:35 PM Basil Gunn <basil@...> wrote:

Keith,

Are you running with gps enabled? Do you have a gps antenna installed?

Update to the latest scripts cd cd n7nix git pull cd config ./bin_refresh.sh

Then run these 3 scripts and show me the console output of everything Change GWDIST=20 in wlgw-check.sh to make it run a little quicker.

cd cd auto-rmsgw-find rm ~/tmp/rmsgwprox.*

./wlgw-check.sh -g CN88tu ./show-log.sh rmslist.sh

/Basil

Re: paclink-unix incoming messages

Basil Gunn
 

There are no incoming messages in your outbox.
Why do you think there are?

Can you reply to the winlink email I sent to you with mutt?

/Basil

Keith Williamson <hkwilliamson@...> writes:

Here you go:

pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
total 8
drwxrwsr-x 2 pi mail 4096 Jun 3 16:50 .
drwxrwsr-x 3 pi mail 4096 Jun 3 16:19 ..
pi@Compass:~ $ ls -alt ~/Mail/
total 48
drwxr-xr-x 2 pi pi 4096 Jun 3 16:53 new
drwxr-xr-x 2 pi pi 4096 Jun 3 16:50 tmp
drwxr-xr-x 12 pi pi 4096 Jun 3 16:13 .
-rw-r--r-- 1 pi pi 0 Jun 3 16:13 .mh_sequences
drwxr-xr-x 5 pi pi 4096 Jun 3 16:12 sent
drwxr-xr-x 5 pi pi 4096 Jun 3 16:12 inbox
drwxr-xr-x 39 pi pi 4096 Jun 3 16:00 ..
drwx------ 2 pi pi 4096 Jun 3 14:57 queue
drwxr-xr-x 5 pi pi 4096 Jun 3 12:36 trash
drwx------ 2 pi pi 4096 Jun 3 11:00 draft
drwxr-xr-x 5 pi pi 4096 Jun 3 09:05 attachments
drwxr-xr-x 5 pi pi 4096 Jun 3 09:05 drafts
drwxr-xr-x 2 pi pi 4096 Jun 3 09:05 cur
pi@Compass:~ $

-Keith

On Mon, Jun 3, 2019 at 10:43 PM Basil Gunn <@basil860> wrote:

With respect to incoming messages ending up in
/usr/local/var/wl2k/output/, I don't know how to fix that. I thought that
postfix was configured correctly by the scripts.

It is. I just tried a new install & things work the way I expect. Send me
the output of these commands.

ls -alt /usr/local/var/wl2k/outbox
ls -alt ~/Mail/

Is it possible that building the latest paclink-unix broke the postfix
config? No /Basil



Re: paclink-unix incoming messages

Keith Williamson
 

Here you go:

pi@Compass:~ $ ls -alt /usr/local/var/wl2k/outbox
total 8
drwxrwsr-x 2 pi mail 4096 Jun  3 16:50 .
drwxrwsr-x 3 pi mail 4096 Jun  3 16:19 ..
pi@Compass:~ $ ls -alt ~/Mail/
total 48
drwxr-xr-x  2 pi pi 4096 Jun  3 16:53 new
drwxr-xr-x  2 pi pi 4096 Jun  3 16:50 tmp
drwxr-xr-x 12 pi pi 4096 Jun  3 16:13 .
-rw-r--r--  1 pi pi    0 Jun  3 16:13 .mh_sequences
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 sent
drwxr-xr-x  5 pi pi 4096 Jun  3 16:12 inbox
drwxr-xr-x 39 pi pi 4096 Jun  3 16:00 ..
drwx------  2 pi pi 4096 Jun  3 14:57 queue
drwxr-xr-x  5 pi pi 4096 Jun  3 12:36 trash
drwx------  2 pi pi 4096 Jun  3 11:00 draft
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 attachments
drwxr-xr-x  5 pi pi 4096 Jun  3 09:05 drafts
drwxr-xr-x  2 pi pi 4096 Jun  3 09:05 cur
pi@Compass:~ $

-Keith

On Mon, Jun 3, 2019 at 10:43 PM Basil Gunn <basil@...> wrote:

With respect to incoming messages ending up in /usr/local/var/wl2k/output/, I don't know how to fix that. I thought that postfix was configured correctly by the scripts.

It is. I just tried a new install & things work the way I expect. Send me the output of these commands.

ls -alt /usr/local/var/wl2k/outbox
ls -alt ~/Mail/

Is it possible that building the latest paclink-unix broke the postfix config? No /Basil

paclink-unix incoming messages

Basil Gunn
 

With respect to incoming messages ending up in /usr/local/var/wl2k/output/, I don't know how to fix that. I thought that postfix was configured correctly by the scripts.

It is. I just tried a new install & things work the way I expect. Send me the output of these commands.

ls -alt /usr/local/var/wl2k/outbox
ls -alt ~/Mail/

Is it possible that building the latest paclink-unix broke the postfix config? No /Basil

Re: Getting started with paclink-unix

Basil Gunn
 

Splitting this into 2 threads. One for auto-rmsgw-find and the other for
paclink-unix incoming messages.
/Basil

Keith Williamson <hkwilliamson@...> writes:

Hi Basil,

I deleted the rmsgwprox* files in ~/tmp and ran wlgw-check.sh -g CN88tu.
Here is the resultant output from show_log.sh:


Start: 2019 06 03 17:01:54 PDT: grid: CN88tu, debug: , GW list refresh:
true, connect: true, cron: false

Chan Conn
RMS GW Freq Dist Name Index Stat Stat Time Conn
KF7FIT-10 223780000 0 NET-21 Unqual n/a 0 0
N7NIX-10 144910000 0 NET-16 Unqual n/a 0 0
K7KCA-10 440125000 3 NET-45 n/a to 0 0
KE7KML-10 223780000 3 NET-21 Unqual n/a 1 0
AF4PM-10 145690000 4 NET-14 n/a to 22 1
AF5TR-10 145690000 11 NET-14 n/a to 21 1
AE7LW-10 145050000 16 NET113 n/a to 22 1
AE7LW-10 440950000 16 NET-46 n/a to 1 0
KD7X-10 145630000 16 NET-13 n/a to 21 1
KI7ULA-10 145050000 16 NET113 n/a to 22 1
W0QJM-10 145630000 19 NET-13 n/a to 22 1
WA7GJZ-10 145630000 19 NET-13 n/a to 22 2
WA7GJZ-10 145630000 19 NET-13 n/a to 22 2
NG2G-10 144990000 26 NET-11 n/a to 21 1
W7ECG-10 144930000 28 NET-17 n/a OK 49 3
KC7OAS-10 144950000 33 NET-12 n/a OK 26 3
KG7WFV-10 145630000 35 NET-13 n/a to 21 1
W7BPD-10 145630000 35 NET-13 n/a to 22 1
W7BPD-11 145630000 35 NET-13 n/a OK 33 2
Finish: 2019 06 03 17:07:50 PDT: Elapsed time: 5 min, 56 secs, Found 16
RMS Gateways, connected: 3
pi@Compass:/usr/local/src/auto-rmsgw-find $

With respect to incoming messages ending up in /usr/local/var/wl2k/output/,
I don't know how to fix that. I thought that postfix was configured
correctly by the scripts.

Is it possible that building the latest paclink-unix broke the postfix
config?

cd /usr/local/src/paclink-unix
git pull
./build-all.sh

Thanks,

Keith


On Mon, Jun 3, 2019 at 4:48 PM Basil Gunn <@basil860> wrote:


First figure out how to ssh into your RPi from the same machine you use
for email. I really prefer a cut & paste of console output rather than a
jpg.

I think all of the infrastructure is in place and working. I just can't
get
email working. I followed the instructions for configuring Claws. I chose
the option to use it for my winlink email client (KF7DRV@...).
When
I get to the last screen where I save the config, Claws complains that it
can't connect to "IMAP server: localhost: 143".
Please send the console output of:
netstat -tulpn | grep 143

You may have to reboot your machine after the paclink-unix install to
start the IMAP server.

On a separate note, I have tested wl2kax25 to w7ecg-10, kf7vol-10, and
kc7oad-10. They all answer up fine and terminate normally. However, when
I
run "wlgw-check.sh -g CN88tu", it doesn't appear to honor the -g
argument.
The gateway list it tests appears to be the default list. Here's the
output
from show_log.sh:
I couldn't replicate this problem.
There is a mechanism in rmslist.sh to not interrogate the Winlink server
too frequently. If you have ever run rmslist.sh without any arguments
that may be what you are seeing. Try deleting the rmslist.sh output
files & running wlgw-check.sh again

cd
cd tmp
rm rmsgwprox.*

Because you sent a jpg of the console I couldn't really tell if there was
anything else in the show_log.sh output.

/Basil



auto-rmsgw-find

Basil Gunn
 

Keith,

Are you running with gps enabled? Do you have a gps antenna installed?

Update to the latest scripts cd cd n7nix git pull cd config ./bin_refresh.sh

Then run these 3 scripts and show me the console output of everything Change GWDIST=20 in wlgw-check.sh to make it run a little quicker.

cd cd auto-rmsgw-find rm ~/tmp/rmsgwprox.*

./wlgw-check.sh -g CN88tu ./show-log.sh rmslist.sh

/Basil