|
john.chabalko@...
I'm not sure what happened but i was checking that my RPi was up to date after not having used it for a couple of weeks (i was away) and now i have no audio. It looks like i've got a problem with the udrc audio module not loading but i'm not really sure how to troubleshoot it again. I tried what was suggested to me (and worked) in the past:
pi@n3ap-p:~/n7nix/bin $ sudo ./chk_bootcfg.sh Verify IF dtoverlay= is set properly dtoverlay currently set to: dtoverlay=draws dtoverlay for DRAWS OK Verify IF dtparam=audio is set properly Last line in /boot/config.txt OK pi@n3ap-p:~/n7nix/bin $ ./chk_conflict.sh Check udrc driver conflict for Kernel release: 4.14.98-v7+ === Loaded module check === Sound card check udrc driver not loaded. pi@n3ap-p:~/n7nix/bin $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 pi@n3ap-p:~/n7nix/bin $ ./showudrc.sh ==== Sound Card ==== No udrc sound card found. ==== Pi Ver ==== Pi 3 Model B+ Mfg by Sony UK Has WiFi ==== udrc Ver ==== Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0405 UUID: b1f4e1df-11e0-4d2b-b213-c87b4dacb830 Vendor: NW Digital Radio ==== sys Ver ==== ----- image version 2019 04 02 13:59:08 PDT: SD image version: beta11 ----- /proc/version Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019 ----- /etc/*version: 9.9 ----- /etc/*release PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)" NAME="Raspbian GNU/Linux" VERSION_ID="9" VERSION="9 (stretch)" ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" ----- lsb_release No LSB modules are available. Distributor ID: Raspbian Description: Raspbian GNU/Linux 9.9 (stretch) Release: 9.9 Codename: stretch ---- systemd Static hostname: n3ap-p Icon name: computer Machine ID: 2f51e140e908474eaa86ae805f03a6d8 Boot ID: a289b2ab2cea40f2b188f083b400f399 Operating System: Raspbian GNU/Linux 9 (stretch) Kernel: Linux 4.14.98-v7+ Architecture: arm ---- modules Command 'apt-get install udrc-dkms' failed or was not run. ---- kernel ||/ Name Version Architecture Description +++-==================-============-============-================================= ii raspberrypi-kernel 1.20190401-1 armhf Raspberry Pi bootloader ii udrc-dkms 1.0.5 armhf DKMS source for the UDRC driver Directory: /proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 exists and status is okay ---- syslog Jun 26 08:04:43 n3ap-p kernel: [ 3.112900] udrc: loading out-of-tree module taints kernel. Jun 26 08:04:43 n3ap-p kernel: [ 3.116578] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.116590] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.156471] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.156480] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.156693] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.156699] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.164400] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.164408] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.165094] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.165106] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.173895] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.173901] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.261054] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.261074] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.277215] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry Jun 26 08:04:43 n3ap-p kernel: [ 3.277224] snd-udrc soc:sound: snd_soc_register_card() failed: -517 Jun 26 08:04:43 n3ap-p kernel: [ 3.369568] snd-udrc soc:sound: tlv320aic32x4-hifi <-> 3f203000.i2s mapping ok ---- dmesg ---- compass Compass preference file not found: /etc/apt/preferences.d/compass ---- compass apt sources list file deb [arch=armhf,amd64] http://archive.compasslinux.org/ cedar main ---- compass package files -rw-r--r-- 1 root 2201 Dec 31 10:44 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_InRelease -rw-r--r-- 1 root 17567 Jul 2 2018 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_main_binary-amd64_Packages -rw-r--r-- 1 root 43316 Dec 31 10:44 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_main_binary-armhf_Packages ----- Dire Wolf DEVELOPMENT version 1.6 B (Feb 27 2019) ==== Filesystem ==== /dev/root 30G 12G 17G 40% / ==== boot config ==== # Uncomment this to enable the lirc-rpi module #dtoverlay=lirc-rpi # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) #dtparam=audio=on force_turbo=1 #dtoverlay= dtoverlay=draws # Enable audio (loads snd_bcm2835) dtparam=audio=on ---- gpsd /usr/local/sbin/gpsd gpsd: 3.18.1 (revision 3.18.1) ● gpsd.service - GPS (Global Positioning System) Daemon Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-06-27 18:58:02 PDT; 2h 52min ago Process: 470 ExecStart=/usr/local/sbin/gpsd $GPSD_OPTIONS $OPTIONS $DEVICES (code=exited, status=0/SUCCESS) Main PID: 473 (gpsd) CGroup: /system.slice/gpsd.service └─473 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0 Jun 27 18:58:02 n3ap-p systemd[1]: Starting GPS (Global Positioning System) Daemon... Jun 27 18:58:02 n3ap-p systemd[1]: Started GPS (Global Positioning System) Daemon. ---- chrony crw------- 1 root root 243, 0 Jun 27 18:57 /dev/pps0 crw-rw---- 1 root dialout 242, 0 Jun 27 18:58 /dev/ttySC0 crw-rw---- 1 root dialout 242, 1 Jun 27 18:57 /dev/ttySC1 -- chrony sources 210 Number of sources = 6 MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== #? GPS 0 3 0 - +0ns[ +0ns] +/- 0ns #? PPS 0 3 0 - +0ns[ +0ns] +/- 0ns ^+ dfw1.ntp5.mattnordhoff.n> 2 10 377 782 -4377us[-4377us] +/- 40ms ^+ 2620:135:5003:ffff::123 2 10 377 61m +1981us[+2706us] +/- 100ms ^+ zinc6.frizzen.net 3 10 377 80m -2897us[-2008us] +/- 104ms ^* t2.time.bf1.yahoo.com 2 10 367 39m +27ms[ +28ms] +/- 83ms -- chrony tracking Reference ID : 10453706 (t2.time.bf1.yahoo.com) Stratum : 3 Ref time (UTC) : Fri Jun 28 04:10:57 2019 System time : 0.000484383 seconds fast of NTP time Last offset : +0.000541080 seconds RMS offset : 0.001359585 seconds Frequency : 4.801 ppm fast Residual freq : -0.013 ppm Skew : 0.422 ppm Root delay : 0.091014 seconds Root dispersion : 0.018564 seconds Update interval : 5433.4 seconds Leap status : Normal -- chrony sourcestats 210 Number of sources = 6 Name/IP Address NP NR Span Frequency Freq Skew Offset Std Dev ============================================================================== GPS 0 0 0 +0.000 2000.000 +0ns 4000ms PPS 0 0 0 +0.000 2000.000 +0ns 4000ms dfw1.ntp5.mattnordhoff.n> 30 13 152m -0.328 0.349 -5613us 901us 2620:135:5003:ffff::123 28 13 107m +0.301 0.786 -6129us 955us zinc6.frizzen.net 24 13 88m -0.539 0.662 -5544us 982us t2.time.bf1.yahoo.com 25 13 129m +1.164 1.844 +14ms 1656us ---- sensors -rw-r--r-- 1 root root 171 Nov 11 2018 /etc/sensors.d/draws ads1015-i2c-1-48 Adapter: bcm2835 I2C adapter User ADC Differential: +0.00 V +12V: +0.00 V User ADC 1: +0.00 V User ADC 2: +0.00 V ---- locale Locale country codes consistent among WiFi cfg file, iw reg & X11: US core_config.sh has been run 1 time(s)
|
|
|
|
Re: error during udrc-dkms
Basil,
Wish I had seen this thread earlier, I got the same error. Hope the info below helps others that may not be so familiar with dpkg. After the failure to upgrade the kernel, the dpkg install and configuration of other upgraded apps may not have completed and the system may be in a usable but possibly unstable state. Issuing the command sudo dpkg -C will perform an audit and will return a list of apps not installed and/or configured. If none are found it returns nothing and the apps have been upgraded. If a list was returned then issuing the command sudo dpkg --configure -a should complete the install and configuration of the other upgraded apps. Issuing the command sudo dpkg -C again will confirm this is the case. Larry - W7PAN
|
|
|
|
Re: DRAWS For Sale+Case+GPS Antenna
JT Croteau <jt.tobit@...>
Wish it was Monday. Good luck.
On Wed, Jun 26, 2019, 18:34 Steve McGrane <temporarilyoffline@...> wrote:
|
|
|
|
Re: DRAWS For Sale+Case+GPS Antenna
Steve McGrane <temporarilyoffline@...>
Oh, BTW that was just a listing of what I've got in it. Make an offer and I'll make a deal.
On Tue, Jun 25, 2019 at 7:57 PM Temporarily Offline <temporarilyoffline@...> wrote:
|
|
|
|
DRAWS For Sale+Case+GPS Antenna
Steve McGrane <temporarilyoffline@...>
Just bring your Pi! (Well... and your radios too) $149.95 DRAWS
$ 14.99 GPS Antenna
$ 26.99 C4Labs DRAWS Case
$ 7.90 Flat Rate Priority Mail Shipping
$199.83 Total First email gets the sweep! Can ship tomorrow. - Steve, KM9G
|
|
|
|
Re: Shipping and case updates?
toggle quoted messageShow quoted text
On Tue, Jun 25, 2019 at 9:43 AM Chris Metcalf <chris@...> wrote:
--
John D. Hays Kingston, WA K7VE
|
|
|
|
Re: Raspberry Pi 4
The Raspberry Pi 4 announcement claims that the GPIO is pin compatible with the 2 and 3. If this holds true, then the physical connection to the DRAWS™ HAT should be fully compatible. We have yet to know if Annaliese's kernel driver for DRAWS™ HAT sound subsystem will be part of the initial Raspbian "Buster" release, which is required for the Raspberry Pi 4. The current beta image is based on "Stretch" which does not support the Raspberry Pi 4 (per the Raspberry Pi Foundation), a self built image will be required until such time as NW Digital Radio provides an image based on Buster. Raspbian Buster does not officially release until July 7th. Status updates will be posted as available. John D. Hays Kingston, WA K7VE
|
|
|
|
Re: Shipping and case updates?
Chris Metcalf
Any updates on the shipping of backordered boards? We're about a week into the period during which backorders were to be shipped - is there any way we can get an idea how deep the queue still is? Thanks!
On Wed, Jun 5, 2019 at 2:55 PM Chris Metcalf <chris@...> wrote:
|
|
|
|
Re: Raspberry Pi 4
Marc Lacy
I most probably will. 73 de KD7RYY
Marc
From: udrc@nw-digital-radio.groups.io [mailto:udrc@nw-digital-radio.groups.io]
On Behalf Of JT Croteau
Sent: Monday, June 24, 2019 5:27 AM To: udrc@nw-digital-radio.groups.io Subject: [draws and udrc] Raspberry Pi 4
Anyone going to be experimenting with the new Raspberry Pi 4?
|
|
|
|
Re: Question HW and SW
Hi Jim. The one with the Python and your weather station goes in the same direction. My goal is to transmit in Bash or Python. Greetings Markus
okiejim <kd6vpe@...> hat am 24. Juni 2019 um 17:54 geschrieben:
|
|
|
|
Re: Question HW and SW
Thanks John.
John D Hays - K7VE <john@...> hat am 24. Juni 2019 um 21:05 geschrieben:
|
|
|
|
Re: Question HW and SW
Hello, Basil.
toggle quoted messageShow quoted text
Thank you very much. I have looked at it yesterday and it goes exactly in this direction. Thank you very much. Greetings Markus
Basil Gunn <basil@pacabunga.com> hat am 24. Juni 2019 um 22:41 geschrieben:
|
|
|
|
Re: Raspberry Pi 4
Chris Metcalf
Count me in as a beta tester if they're needed!
On Mon, Jun 24, 2019 at 11:12 AM John D Hays - K7VE <john@...> wrote:
|
|
|
|
Re: [udrc] #draws Aluminum Case
#draws
Chris Metcalf
Awesome, that is great news!
toggle quoted messageShow quoted text
-- Chris Metcalf From: Bryan Hoyer <bhhoyer@...> Reply: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> Date: June 24, 2019 at 16:05:24 To: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> Subject: Re: [draws and udrc] [udrc] #draws Aluminum Case
|
|
|
|
Re: [udrc] #draws Aluminum Case
#draws
Keating Floyd
You are all really amazing - thank you, for so much attention to all the moving parts! Keating KC4HSI
On Mon, Jun 24, 2019 at 9:05 PM Bryan Hoyer <bhhoyer@...> wrote: Due to production delays, we will attempt to make both the early-adopter and production cases Pi 3-4 compatible.
|
|
|
|
Re: [udrc] #draws Aluminum Case
#draws
Due to production delays, we will attempt to make both the early-adopter and production cases Pi 3-4 compatible.
We should have an update this week. 73 Bryan K7UDR
|
|
|
|
Re: Question HW and SW
Hi Markus,
toggle quoted messageShow quoted text
I believe the measure_deviate.sh script does what you want. Instead of playing the tone WAV file, point the aplay line at the appropriate audio file. The script takes care of turning on/off PTT for left/right mDin6 connector used. https://github.com/nwdigitalradio/n7nix/tree/master/deviation If you just want a simple script to control PTT then please check ptt_ctrl.sh https://github.com/nwdigitalradio/n7nix/blob/master/bin/ptt_ctrl.sh /Basil Markus <subscribe@meldekopf.de> writes:
Hello community,
|
|
|
|
Re: Question HW and SW
I have not implemented or tested this, but it should work. Raspbian is Linux on the Raspberry Pi, so you only need the Pi plus DRAWS™ HAT and radios. The wiring to the radio is straightforward using the amateur radio standard mini DIN-6 pinout for packet radio. minimodem installs with a simple apt-get. Look at some of the TTS (text to speech) packages.
On Mon, Jun 24, 2019 at 8:46 AM Markus <subscribe@...> wrote: Hello community, --
John D. Hays Kingston, WA K7VE
|
|
|
|
Re: [udrc] #draws Aluminum Case
#draws
Dave N2OA
You can't expect them to create another early adopter case for the Pi 4. My understanding is that a discount was offered to early adopters and you took the risk knowing that there could be issues. If not being able to use the aluminum case and the Pi 4 with the early adopter board is the biggest issue, I'm fine with that, after all it didn't exist when these things were designed. If it turns out there is a defect in the board that causes it to stop working tomorrow, that would be a bummer but I also knew there was that risk and I'd be glad that I helped iron out any issues. I own two DRAWS boards and have two cases on order. I bought them knowing that anything could happen but I wanted to experiment with something new that I believe has potential. That is the Amateur spirit, isn't it? Dave N2OA
On Mon, Jun 24, 2019 at 2:22 PM Chris Metcalf <chris@...> wrote:
|
|
|
|
Re: [udrc] #draws Aluminum Case
#draws
Chris Metcalf
> We will have an update on cases this week, Including changes to accommodate the new Pi4. If we have a case on backorder (ordered mine a couple months ago) will we be receiving the Pi4-compatible cases or the old Pi3 case? FWIW, at this point I'd rather have the DRAWS board in hand and I can wait on the case if I have to. I won't have my Pi4 until July anyway. - Chris
On Mon, Jun 24, 2019 at 10:19 AM Bryan Hoyer <bhhoyer@...> wrote: Hello August,
|
|
|
