Date   

NWDR15 Image observations

Dave Christensen
 

To the Group:
I am starting a new build from scratch using the new Version 15 image and have found the first gotcha during the first boot, just before doing the OS updates.  I had a dead battery in the DRAWS hat and it would not get past "synchronising clock".  I shut down the system and pulled the Draws battery and started the system this time bypassing the setting the clock problem.  It is now updating and rebooting after updates.

Thanks for building this image
Dave - KD7UM


Re: AX25 over UDP is not working on #nw14

Basil Gunn
 

Hi Bernard,

I made your change suggestions and started from a default config to see
where the script would fail. I found that ax25ipd could fail but still
end up with a pid. I've added return value checks for both ax25ipd &
kissattach.
I'm not sure what program uses the AXUDP environment variable that
contains the pseudo term name.

https://github.com/nwdigitalradio/n7nix/blob/master/ax25/ax25ipd-start.sh

Thanks Bernard.
/Basil


f6bvp <f6bvp@...> writes:

Hi Basil,

I tried your improved script and found that it stopped in the middle at line with tail -1.
I had to changed it in order to make the script run.
Please find attached diff file.

BTW many thanks for letting me know about option -t that changed. It did not notice that !

73 de Bernard


Re: AX25 over UDP is not working on #nw14

Bernard f6bvp / ai7bg
 

Hi Basil,

I tried your improved script and found that it stopped in the middle at line with tail -1.
I had to changed it in order to make the script run.
Please find attached diff file.

BTW many thanks for letting me know about option -t that changed. It did not notice that !

73 de Bernard


Re: KC9KKORE: Second interface

Cowan Bowman
 


Thank you for the information and the links.

I was looking in the N7NIX repository and didn't realize the information was in it's on repository.

Basically, I wanted to see your approach in setting up pulseaudio and alsa.

I wanted to have basic use of split channels for non ax25 HF using fldigi, wsjtx, or js8call applications and monitor on two separate radios.

It is my 1st time using pulseaudio, and after some experimentation I was able to figure out how to set it up and even remotely listen to the radio audio with RealVNC Profesional server/client.

Still have some fine tuning and additional testing.

I opted to use the default distribution package settings and setup additional setting similar to your but using them in ~/.asoundrc and ~/.pulse/default.pa to split the channels.

Great work guys and thank you again.

Cowan


Re: KC9KKORE: Second interface

 


On Sat, Jan 18, 2020 at 4:34 PM John D Hays - K7VE via Groups.Io <john=hays.org@groups.io> wrote:
Cowan. What are you attempting to do?



--
John D. Hays
Kingston, WA
K7VE

 


Re: KC9KKORE: Second interface

 

Cowan. What are you attempting to do?


Re: KC9KKORE: Second interface

Basil Gunn
 

One thing I forgot to mention is the speed_switch.sh script is dependent on the
radio you are using. I used a Kenwood TM-V71a. See the "set alsa config"
line towards the bottom of the file. Also you will need to create a
custom set alsa file if you are using split_channels.

/Basil n7nix

Basil Gunn <@basil860> writes:

I saw that you referenced that you were able to run 9600 and or 1200
on a single radio interface.

Can you refer us to the code, configuration that allows for on the fly
switchng between Direwolf 9600/1200 baud packet speeds.
I think John K7VE was referring to running 1200/9600 at the same
time. Technically you can do that but there is a problem with PTT for
each of the channels. I hope John weighs in on this.

As far as switching between 1200 & 9600 baud, I demonstrated that at the
'Summer Gathering' digital conference. You can look at the script used
to toggle between the 2 baud rates here:

https://github.com/nwdigitalradio/n7nix/blob/master/debug/speed_switch.sh

Also look in these 2 files for changes to ax25parms & kissparms
https://github.com/nwdigitalradio/n7nix/blob/master/systemd/ax25/ax25-upd
https://github.com/nwdigitalradio/n7nix/blob/master/systemd/ax25/ax25dev-parms

Changes in parameters are conditional on existence of a file:
/etc/ax25/packet_9600baud

speed_switch.sh will be supported in the nwdr15.img

/Basil n7nix


Re: KC9KKORE: Second interface

Basil Gunn
 

I saw that you referenced that you were able to run 9600 and or 1200
on a single radio interface.

Can you refer us to the code, configuration that allows for on the fly
switchng between Direwolf 9600/1200 baud packet speeds.
I think John K7VE was referring to running 1200/9600 at the same
time. Technically you can do that but there is a problem with PTT for
each of the channels. I hope John weighs in on this.

As far as switching between 1200 & 9600 baud, I demonstrated that at the
'Summer Gathering' digital conference. You can look at the script used
to toggle between the 2 baud rates here:

https://github.com/nwdigitalradio/n7nix/blob/master/debug/speed_switch.sh

Also look in these 2 files for changes to ax25parms & kissparms
https://github.com/nwdigitalradio/n7nix/blob/master/systemd/ax25/ax25-upd
https://github.com/nwdigitalradio/n7nix/blob/master/systemd/ax25/ax25dev-parms

Changes in parameters are conditional on existence of a file:
/etc/ax25/packet_9600baud

speed_switch.sh will be supported in the nwdr15.img

/Basil n7nix


Re: KC9KKORE: Second interface

Basil Gunn
 

If you mean split channels for packet & HF using both channels of an
audio sound card ie. draws then:

https://github.com/nwdigitalradio/split-channels

or there is good split channel support in the up coming nwdr15.img
release:

https://github.com/nwdigitalradio/n7nix/tree/master/splitchan

You are right the Wiki entry for:
Creating Virtual Sound Cards for the UDRC or DRAWS
does not work.
/Basil

Cowan Bowman <cowan@...> writes:

Are you meaning the virtual sound card under projects on the wiki? It doesn't seem to exist any longer and I am attempting to setup PulseAudio.


Re: KC9KKORE: Second interface

Cowan Bowman
 

Are you meaning the virtual sound card under projects on the wiki?  It doesn't seem to exist any longer and I am attempting to setup PulseAudio.

Thanks,
Cowan


Re: setting up the DRAWS hat with Buster #draws #install

John Ronan
 

Thanks for that Nugget WIlliam. That worked for me just now (PI-2, UDRC Hat).

Cheers
John
EI7IG


Re: AX25 over UDP is not working on #nw14

Basil Gunn
 

I installed nwdr15.img and found that AX.25 was running very well
using your scripts ax25-start / ax25-stop.
OK great to hear. Just an FYI, the final nwdr15.img file is not ready
yet.

In order to complete my system configuration I added a script creating
an axudp device for using AX25 over IP/UDP via Internet or via HAMNET
(a high speed Ham data network using WiFi used in Germany and France).
I called the attached script ax25ipd-start.sh. It must be used after
ax25-start.
OK, I made some changes to that script so the temporary output files
don't collide with the previously run mkiss command. Please let me know
if the ax25ipd-start.sh script I checked in works for you. Also in order
for the export command in this script to work you need to run it like
this:

source ./ax25ipd-start.sh
or
. ./ax25ipd-start.sh

# Test like this:
printenv | grep -i axupd
and
echo $AXUDP

ax25ipd-start.sh is in my repository here:
https://github.com/nwdigitalradio/n7nix/blob/master/ax25/ax25ipd-start.sh

In order to work, the configuration needs /etc/ax25/ax25ipd.conf file.
I found that the distributed one is fine, thus I just made a copy of
ax25ipd.conf.dist to ax25ipd.conf in the same directory. There must
also be an axudp port declared in /etc/ax25/axports file. For this
port I set speed to 115200 and paclen to 253. This axudp port may be
used by AX.25 applications such as Node, FPAC, BBS linFBB.

listen -chat
will display all AX.25 network trafic including udr0, udr1 and
axudp.
Note that the command line argument '-t' for listen: 2.0.1 has changed from
previous versions. The latest version of listen defaults to printing a
timestamp where as specifying the -t arg turns it off.

-t Don't print a timestamp on each dump line.

Bernard, f6bvp


Re: AX25 over UDP is not working on #nw14

Bernard f6bvp / ai7bg
 

Hi Basil,
I installed nwdr15.img and found that AX.25 was running very well using your scripts ax25-start / ax25-stop.
In order to complete my system configuration I added a script creating an axudp device for using AX25 over IP/UDP via Internet
or via HAMNET (a high speed Ham data network using WiFi used in Germany and France).
I called the attached script ax25ipd-start.sh. It must be used after ax25-start.

In order to work, the configuration needs /etc/ax25/ax25ipd.conf file.
I found that the distributed one is fine, thus I just made a copy of ax25ipd.conf.dist to ax25ipd.conf in the same directory.
There must also be an axudp port declared in /etc/ax25/axports file. For this port I set speed to 115200 and paclen to 253.
This axudp port may be used by AX.25 applications such as Node, FPAC, BBS linFBB.
listen -chat will display all AX.25 network trafic including udr0, udr1 and axudp.

Bernard, f6bvp
http://f6bvp.org


[New post] DRAWS™Case Update

 



k7udr posted: "We are on track to receive the final prototypes Feb 15th, at which time we can place the production order for the Early Adopter and production cases. Thanks for your patience."

New post on NW Digital Radio

DRAWSCase Update

by k7udr

We are on track to receive the final prototypes Feb 15th, at which time we can place the production order for the Early Adopter and production cases.

Thanks for your patience.

k7udr | January 17, 2020 at 8:12 am | Categories: DRAWS | URL: https://wp.me/p2mAAP-1QN




Re: Xiegu G90: General Setup, I/Q panadapter setup via second input

Basil Gunn
 

- Any advice on configuration and levels to start with? I haven't found a
setup script for the G90 in the GitHub repository yet.
You are setting deviation so focus on ALSA PCM & LO Driver Gain knobs.
Read this:
https://github.com/nwdigitalradio/n7nix/tree/master/deviation
and this:
https://www.febo.com/packet/layer-one/transmit.html

Look in your radio manual for transmit data input (PKD) sensitivity and input
impedance.
Use John's web based draws-manager to determine the correct ALSA levels.

Search groups.io udrc messages ie.
https://nw-digital-radio.groups.io/g/udrc/search?q=draws-manager

/Basil n7nix


Xiegu G90: General Setup, I/Q panadapter setup via second input

Chris Metcalf
 

I recently added a Xiegu G90 to my "shack" and I want to set it up with my DRAWS hat. I believe I've figured out the right way to connect it up, currently via the CE-19 adapter board, but I'll probably switch to a direct connection to its 8 pin port soon.

Questions:
- Any advice on configuration and levels to start with? I haven't found a setup script for the G90 in the GitHub repository yet.
- What about CAT setup? I'm currently using the IC-7000 profile in wsjt-x but its somewhat unstable. 
- Once I get the basic setup done, I wanted to try getting the I/Q output set up as a panadapter - can I wire that in to the two input pins on the second DIN port to get a stereo input?

Thanks,
Chris
K1NOT


Re: UDRC/DV3000U/ASL

Charles Blackburn <wx4cb@...>
 

no but i'd be interested in it... would be nice to have dmr access to our repeater :D

On 1/12/2020 9:53 AM, John Ronan wrote:
Morning,

I found this morning a bunch of UDRC boards that I "lost" in a house move. A project that I put on the long finger quite a while ago was a DMR to Analog Bridge to get our local Analogue Repeater System onto a DMR TG without tying up a Slot on a repeater.  So far the UDRC is being recognised by my PI-2 but I'm wondering is this a route anyone else has travelled before me, or am I wasting my time.

Thanks & HNY

John
EI7IG



UDRC/DV3000U/ASL

John Ronan
 

Morning,

I found this morning a bunch of UDRC boards that I "lost" in a house move. A project that I put on the long finger quite a while ago was a DMR to Analog Bridge to get our local Analogue Repeater System onto a DMR TG without tying up a Slot on a repeater.  So far the UDRC is being recognised by my PI-2 but I'm wondering is this a route anyone else has travelled before me, or am I wasting my time.

Thanks & HNY

John
EI7IG


Re: shipping #draws

 

On Fri, Jan 10, 2020 at 11:48 AM Charles Blackburn <wx4cb@...> wrote:
ok that's fine, but it would be nice to change the website to that
effect and put that email address on there in the contact section.

the only way listed to contact anyone is via this group

Charlie
--
John D. Hays
Kingston, WA
K7VE

 


Re: shipping #draws

Charles Blackburn <wx4cb@...>
 

ok that's fine, but it would be nice to change the website to that effect and put that email address on there in the contact section.

the only way listed to contact anyone is via this group

Charlie

On 1/9/2020 5:55 PM, John D Hays - K7VE wrote:
As Basil indicated, Bryan is "out of service" for a bit. Bryan handles all orders and returns.

Questions about orders and shipments should go to sales@... and Bryan will provide estimated times (once he is back in service).