Date   

Re: Just to be clear. What pins are for CAT?

Graham Auld
 

There is no CAT control on the DRAWS hat. The mini DINS are for the input/output of digital audio. You can attach two radios hence two connectors. CAT is done by a USB to CAT cable for your radio. You need to provide that cable.

I was totally lost until I found a great series of videos starting at https://youtu.be/u6wz2kZJ5Vo

These five videos take you calmly through setup step by step. That guy deserves a medal.

All the best

Graham - 2M0IJU


Re: Just to be clear. What pins are for CAT?

Eric KD7CAO <kd7cao@...>
 

John,

Tried to click on that link but the file does not exist. Here is a screenshot of the folder:

image.png


On Wed, Feb 19, 2020 at 5:59 PM John D Hays - K7VE <john@...> wrote:

On Wed, Feb 19, 2020 at 3:54 PM John D. Hays <john@...> wrote:
CAT is not part of the mini din interface specification.  It was created as a standard long before CAT was popular.  

Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi.

On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote:

I am going to make some cables, starting with CAT control.

What pins on the  L/R mini dins are for cat levels plaese?

I will keep struggling with the software at a later stage.

It is all very muddy, as there is not a simple how to list that I can find.

The use of external interfacing is used by a lot of people trying to explain theur setups.

I just want to get the Draws /Pi up and running non remotely at first.

Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running.

It genuinely is quite confusing sorry to say.

I love the concept however, so am prepared to learn.

cheers guys.

73, John VK5PO




--
John D. Hays
Kingston, WA
K7VE

 



--
John D. Hays
Kingston, WA
K7VE

 



--
Eric M. Gildersleeve ~ KD7CAO
Google Voice: 940-784-3029


DRAWS for sale #draws

Kk6qms
 

Hello- I have an unused DRAWS with a Pi3 and DRAWS image in orig USPS box and packaging. This has 2 radio cables and GPS antenna. I really do not have the time or ability at this point to use it so I would like to let it go. If interested in pics or coming up w a price please email me at kk6qms at arrl dot net.
Thanks.
Clifford
KK6QMS


Re: Just to be clear. What pins are for CAT?

John McRae
 

cheers John.

I thought that was the case.

thanks for quick response!!!

73

On 20/02/2020 10:24 am, John D Hays - K7VE wrote:
CAT is not part of the mini din interface specification.  It was created as a standard long before CAT was popular.  

Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi.

On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote:

I am going to make some cables, starting with CAT control.

What pins on the  L/R mini dins are for cat levels plaese?

I will keep struggling with the software at a later stage.

It is all very muddy, as there is not a simple how to list that I can find.

The use of external interfacing is used by a lot of people trying to explain theur setups.

I just want to get the Draws /Pi up and running non remotely at first.

Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running.

It genuinely is quite confusing sorry to say.

I love the concept however, so am prepared to learn.

cheers guys.

73, John VK5PO




--
John D. Hays
Kingston, WA
K7VE

 

-- 
MY GMAIL desktop Email accoount,
JF McRae, VK5PO/VK5SIX


Re: Just to be clear. What pins are for CAT?

Chris Metcalf
 

Related-ish, does the "Accessory Connector HDR-4X2M" connector have another standardized name if I wanted to source a connector for it? I currently have female header jumpers connected to it, but I'd like something more robust.


On Wed, Feb 19, 2020 at 3:59 PM John D Hays - K7VE <john@...> wrote:

On Wed, Feb 19, 2020 at 3:54 PM John D. Hays <john@...> wrote:
CAT is not part of the mini din interface specification.  It was created as a standard long before CAT was popular.  

Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi.

On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote:

I am going to make some cables, starting with CAT control.

What pins on the  L/R mini dins are for cat levels plaese?

I will keep struggling with the software at a later stage.

It is all very muddy, as there is not a simple how to list that I can find.

The use of external interfacing is used by a lot of people trying to explain theur setups.

I just want to get the Draws /Pi up and running non remotely at first.

Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running.

It genuinely is quite confusing sorry to say.

I love the concept however, so am prepared to learn.

cheers guys.

73, John VK5PO




--
John D. Hays
Kingston, WA
K7VE

 



--
John D. Hays
Kingston, WA
K7VE

 


Re: Just to be clear. What pins are for CAT?

 


On Wed, Feb 19, 2020 at 3:54 PM John D. Hays <john@...> wrote:
CAT is not part of the mini din interface specification.  It was created as a standard long before CAT was popular.  

Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi.

On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote:

I am going to make some cables, starting with CAT control.

What pins on the  L/R mini dins are for cat levels plaese?

I will keep struggling with the software at a later stage.

It is all very muddy, as there is not a simple how to list that I can find.

The use of external interfacing is used by a lot of people trying to explain theur setups.

I just want to get the Draws /Pi up and running non remotely at first.

Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running.

It genuinely is quite confusing sorry to say.

I love the concept however, so am prepared to learn.

cheers guys.

73, John VK5PO




--
John D. Hays
Kingston, WA
K7VE

 



--
John D. Hays
Kingston, WA
K7VE

 


Re: Just to be clear. What pins are for CAT?

 

CAT is not part of the mini din interface specification.  It was created as a standard long before CAT was popular.  

Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi.

On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote:

I am going to make some cables, starting with CAT control.

What pins on the  L/R mini dins are for cat levels plaese?

I will keep struggling with the software at a later stage.

It is all very muddy, as there is not a simple how to list that I can find.

The use of external interfacing is used by a lot of people trying to explain theur setups.

I just want to get the Draws /Pi up and running non remotely at first.

Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running.

It genuinely is quite confusing sorry to say.

I love the concept however, so am prepared to learn.

cheers guys.

73, John VK5PO




--
John D. Hays
Kingston, WA
K7VE

 


Just to be clear. What pins are for CAT?

John McRae
 

I am going to make some cables, starting with CAT control.

What pins on the  L/R mini dins are for cat levels plaese?

I will keep struggling with the software at a later stage.

It is all very muddy, as there is not a simple how to list that I can find.

The use of external interfacing is used by a lot of people trying to explain theur setups.

I just want to get the Draws /Pi up and running non remotely at first.

Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running.

It genuinely is quite confusing sorry to say.

I love the concept however, so am prepared to learn.

cheers guys.

73, John VK5PO


_._,_._,_
-- 
MY GMAIL desktop Email accoount,
JF McRae, VK5PO/VK5SIX


Re: PRECIPITOUS EDUCATIONAL ARC

Bernard f6bvp / ai7bg
 

Hi Basil,
I performed all instructions you gave and rebooted.
However I could not connect to localhost:8080

Hi John,
Here it is :
root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp
total 228
-rw-r--r--   1 root staff   3372 sept. 19 23:25 amixer.js
-rw-r--r--   1 root staff   1166 sept. 19 23:25 app.js
drwxr-sr-x   2 root staff   4096 sept. 19 23:25 bin
-rw-r--r--   1 root staff      0 févr. 18 18:33 draws-apps.json
-rw-r--r--   1 root staff   6111 sept. 19 23:25 io.js
-rw-r--r--   1 root staff   2593 sept. 19 23:25 mixerState.js
drwxr-sr-x 255 root staff  12288 sept. 28 22:02 node_modules
-rw-r--r--   1 root staff    506 sept. 19 23:25 package.json
-rw-r--r--   1 root staff 175710 sept. 19 23:29 package-lock.json
drwxr-sr-x   5 root staff   4096 sept. 19 23:25 public
-rw-r--r--   1 root staff   1254 sept. 19 23:25 radios.json
drwxr-sr-x   2 root staff   4096 sept. 19 23:25 routes
drwxr-sr-x   4 root staff   4096 sept. 19 23:25 views
root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp/bin
total 4
-rwxr-xr-x 1 root staff 1905 sept. 19 23:25 www
root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp/bin/
total 4
-rwxr-xr-x 1 root staff 1905 sept. 19 23:25 www

However, after doing a second time 
systemctl stop draws-manager.service
This time
systemctl status draws-manager.service
displayed : active running
but soon after it turns to active failed.

Here is the complete bebug log.
root@raspberrypi:/home/pi# systemctl status draws-manager
● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration.
   Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2020-02-18 22:17:04 CET; 19s ago
     Docs: https://github.com/nwdigitalradio/draws-manager
  Process: 2795 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE)
 Main PID: 2795 (code=exited, status=1/FAILURE)
 
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! errno 1
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! webapp@0.0.0 start: `node ./bin/www`
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! Exit status 1
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR!
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! Failed at the webapp@0.0.0 start script.
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! This is probably not a problem with npm. There is likely a
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! A complete log of this run can be found in:
févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR!     /root/.npm/_logs/2020-02-18T21_17_04_429Z-debug.log
févr. 18 22:17:04 raspberrypi systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/
févr. 18 22:17:04 raspberrypi systemd[1]: draws-manager.service: Failed with result 'exit-code'.
root@raspberrypi:/home/pi# 
root@raspberrypi:/home/pi# 
root@raspberrypi:/home/pi# 
root@raspberrypi:/home/pi# 
root@raspberrypi:/home/pi# cat /root/.npm/_logs/2020-02-18T21_17_04_429Z-debug.log
0 info it worked if it ends with ok
1 warn npm npm does not support Node.js v10.15.2
2 warn npm You should probably upgrade to a newer version of node as we
3 warn npm can't make any promises that npm will work with this version.
4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9.
5 warn npm You can find the latest version at https://nodejs.org/
6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
7 info using npm@5.8.0
8 info using node@...
9 verbose run-script [ 'prestart', 'start', 'poststart' ]
10 info lifecycle webapp@0.0.0~prestart: webapp@0.0.0
11 info lifecycle webapp@0.0.0~start: webapp@0.0.0
12 verbose lifecycle webapp@0.0.0~start: unsafe-perm in lifecycle true
13 verbose lifecycle webapp@0.0.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/usr/local/var/draws-manager/webapp/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
14 verbose lifecycle webapp@0.0.0~start: CWD: /usr/local/var/draws-manager/webapp
15 silly lifecycle webapp@0.0.0~start: Args: [ '-c', 'node ./bin/www' ]
16 silly lifecycle webapp@0.0.0~start: Returned: code: 1  signal: null
17 info lifecycle webapp@0.0.0~start: Failed to exec start script
18 verbose stack Error: webapp@0.0.0 start: `node ./bin/www`
18 verbose stack Exit status 1
18 verbose stack     at EventEmitter.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/index.js:283:16)
18 verbose stack     at EventEmitter.emit (events.js:189:13)
18 verbose stack     at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14)
18 verbose stack     at ChildProcess.emit (events.js:189:13)
18 verbose stack     at maybeClose (internal/child_process.js:970:16)
18 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
19 verbose pkgid webapp@0.0.0
20 verbose cwd /usr/local/var/draws-manager/webapp
21 verbose Linux 4.19.97-v7l+
22 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
23 verbose node v10.15.2
24 verbose npm  v5.8.0
25 error code ELIFECYCLE
26 error errno 1
27 error webapp@0.0.0 start: `node ./bin/www`
27 error Exit status 1
28 error Failed at the webapp@0.0.0 start script.
28 error This is probably not a problem with npm. There is likely additional logging output above.
29 verbose exit [ 1, true ]
 
As I do not need presently that Draws-manager I will not take your time and will wait for a fresh install when I get the opportunity or need to do so. Everything else is doing well presently.

73 de Bernard
Thanks both for your help.


Re: PRECIPITOUS EDUCATIONAL ARC

Basil Gunn
 

I just burned and booted an nwdr15.img and draws-manager ran and worked
in both remote & local browser without doing anything further.

I then:

cd
cd n7nix
git pull
cd config
./bin_refresh.sh

sudo su
apt-get update
apt-get dist-upgrade

and after a reboot draws-manager again ran fine.

If you did something other than the above or attempted to install
draws-manager when it is already installed then that possibly could be
your problem.

/Basil n7nix


Basil Gunn <@basil860> writes:

I do not see it on my nwdr15.img installed system.
draws-manager is installed & running by default on the nwdr15 image.
Verify draws-manager running like this:

systemctl status draws-manager.service

Run like this on a remote computer:

<ip-address-of-pi>:8080

or on a local RPi

localhost:8080

/Basil n7nix


Re: PRECIPITOUS EDUCATIONAL ARC

Basil Gunn
 

I do not see it on my nwdr15.img installed system.
draws-manager is installed & running by default on the nwdr15 image.
Verify draws-manager running like this:

systemctl status draws-manager.service

Run like this on a remote computer:

<ip-address-of-pi>:8080

or on a local RPi

localhost:8080

/Basil n7nix


Re: PRECIPITOUS EDUCATIONAL ARC

 

What does this return:

ls -l /usr/local/var/draws-manager/webapp
ls -l /usr/local/var/draws-manager/webapp/bin



On Tue, Feb 18, 2020 at 10:40 AM f6bvp <f6bvp@...> wrote:
Hi John,
Thanks for the link.
I followed instructions but could not log in to Draws-manager.
Here ifollows a complete report.

73's Bernard

systemctl status draws-manager
● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration.
   Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2020-02-18 19:30:08 CET; 5min ago
  Process: 11521 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE)
 Main PID: 11521 (code=exited, status=1/FAILURE)
 
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! errno 1
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! webapp@0.0.0 start: `node ./bin/www`
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Exit status 1
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR!
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Failed at the webapp@0.0.0 start script.
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! This is probably not a problem with npm. There is likely additional loggin
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! A complete log of this run can be found in:
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR!     /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log
févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/FAILURE
févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Failed with result 'exit-code'.
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager#  /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log
bash: /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log: Permission non accordée
root@raspberrypi:/home/pi/draws-manager# cat /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log
0 info it worked if it ends with ok
1 warn npm npm does not support Node.js v10.15.2
2 warn npm You should probably upgrade to a newer version of node as we
3 warn npm can't make any promises that npm will work with this version.
4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9.
5 warn npm You can find the latest version at https://nodejs.org/
6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
7 info using npm@5.8.0
8 info using node@...
9 verbose run-script [ 'prestart', 'start', 'poststart' ]
10 info lifecycle webapp@0.0.0~prestart: webapp@0.0.0
11 info lifecycle webapp@0.0.0~start: webapp@0.0.0
12 verbose lifecycle webapp@0.0.0~start: unsafe-perm in lifecycle true
13 verbose lifecycle webapp@0.0.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/usr/local/var/draws-manager/webapp/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
14 verbose lifecycle webapp@0.0.0~start: CWD: /usr/local/var/draws-manager/webapp
15 silly lifecycle webapp@0.0.0~start: Args: [ '-c', 'node ./bin/www' ]
16 silly lifecycle webapp@0.0.0~start: Returned: code: 1  signal: null
17 info lifecycle webapp@0.0.0~start: Failed to exec start script
18 verbose stack Error: webapp@0.0.0 start: `node ./bin/www`
18 verbose stack Exit status 1
18 verbose stack     at EventEmitter.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/index.js:283:16)
18 verbose stack     at EventEmitter.emit (events.js:189:13)
18 verbose stack     at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14)
18 verbose stack     at ChildProcess.emit (events.js:189:13)
18 verbose stack     at maybeClose (internal/child_process.js:970:16)
18 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
19 verbose pkgid webapp@0.0.0
20 verbose cwd /usr/local/var/draws-manager/webapp
21 verbose Linux 4.19.93-v7l+
22 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
23 verbose node v10.15.2
24 verbose npm  v5.8.0
25 error code ELIFECYCLE
26 error errno 1
27 error webapp@0.0.0 start: `node ./bin/www`
27 error Exit status 1
28 error Failed at the webapp@0.0.0 start script.
28 error This is probably not a problem with npm. There is likely additional logging output above.
29 verbose exit [ 1, true ]
root@raspberrypi:/home/pi/draws-manager# 
 



--
John D. Hays
Kingston, WA
K7VE

 


Re: PRECIPITOUS EDUCATIONAL ARC

Bernard f6bvp / ai7bg
 

Hi John,
Thanks for the link.
I followed instructions but could not log in to Draws-manager.
Here ifollows a complete report.

73's Bernard

systemctl status draws-manager
● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration.
   Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2020-02-18 19:30:08 CET; 5min ago
     Docs: https://github.com/nwdigitalradio/draws-manager
  Process: 11521 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE)
 Main PID: 11521 (code=exited, status=1/FAILURE)
 
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! errno 1
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! webapp@0.0.0 start: `node ./bin/www`
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Exit status 1
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR!
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Failed at the webapp@0.0.0 start script.
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! This is probably not a problem with npm. There is likely additional loggin
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! A complete log of this run can be found in:
févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR!     /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log
févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/FAILURE
févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Failed with result 'exit-code'.
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager# 
root@raspberrypi:/home/pi/draws-manager#  /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log
bash: /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log: Permission non accordée
root@raspberrypi:/home/pi/draws-manager# cat /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log
0 info it worked if it ends with ok
1 warn npm npm does not support Node.js v10.15.2
2 warn npm You should probably upgrade to a newer version of node as we
3 warn npm can't make any promises that npm will work with this version.
4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9.
5 warn npm You can find the latest version at https://nodejs.org/
6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ]
7 info using npm@5.8.0
8 info using node@...
9 verbose run-script [ 'prestart', 'start', 'poststart' ]
10 info lifecycle webapp@0.0.0~prestart: webapp@0.0.0
11 info lifecycle webapp@0.0.0~start: webapp@0.0.0
12 verbose lifecycle webapp@0.0.0~start: unsafe-perm in lifecycle true
13 verbose lifecycle webapp@0.0.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/usr/local/var/draws-manager/webapp/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
14 verbose lifecycle webapp@0.0.0~start: CWD: /usr/local/var/draws-manager/webapp
15 silly lifecycle webapp@0.0.0~start: Args: [ '-c', 'node ./bin/www' ]
16 silly lifecycle webapp@0.0.0~start: Returned: code: 1  signal: null
17 info lifecycle webapp@0.0.0~start: Failed to exec start script
18 verbose stack Error: webapp@0.0.0 start: `node ./bin/www`
18 verbose stack Exit status 1
18 verbose stack     at EventEmitter.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/index.js:283:16)
18 verbose stack     at EventEmitter.emit (events.js:189:13)
18 verbose stack     at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14)
18 verbose stack     at ChildProcess.emit (events.js:189:13)
18 verbose stack     at maybeClose (internal/child_process.js:970:16)
18 verbose stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
19 verbose pkgid webapp@0.0.0
20 verbose cwd /usr/local/var/draws-manager/webapp
21 verbose Linux 4.19.93-v7l+
22 verbose argv "/usr/bin/node" "/usr/bin/npm" "start"
23 verbose node v10.15.2
24 verbose npm  v5.8.0
25 error code ELIFECYCLE
26 error errno 1
27 error webapp@0.0.0 start: `node ./bin/www`
27 error Exit status 1
28 error Failed at the webapp@0.0.0 start script.
28 error This is probably not a problem with npm. There is likely additional logging output above.
29 verbose exit [ 1, true ]
root@raspberrypi:/home/pi/draws-manager# 
 


Re: PRECIPITOUS EDUCATIONAL ARC

 


On Tue, Feb 18, 2020 at 10:05 AM f6bvp <f6bvp@...> wrote:
Hi,
Sorry but the video fails to explain how to install Draws-Manager and how to start it.
I do not see it on my nwdr15.img installed system.
Regards,
Bernard, f6bvp



--
John D. Hays
Kingston, WA
K7VE

 


Re: PRECIPITOUS EDUCATIONAL ARC

Bernard f6bvp / ai7bg
 

Hi,
Sorry but the video fails to explain how to install Draws-Manager and how to start it.
I do not see it on my nwdr15.img installed system.
Regards,
Bernard, f6bvp


Re: PRECIPITOUS EDUCATIONAL ARC

John McRae
 

Thanks for the info about the youtube vid.

I'll watch it soo9n, and work from that.

cheers John

73, VK5PO

On 18/02/2020 4:05 am, John D Hays - K7VE wrote:

This web tool handles settings, with out having to go into all of the controls of alsamixer.

On Mon, Feb 17, 2020 at 7:51 AM John McRae <johnfmcrae.desktop@...> wrote:
Hi everyone.

Slowly working my way around the DRAWS/Rasp Pi...

I would like to know the sound codex I/O information please.
Seems a lot of options to choose from.
That is for setting up JS8Call at this stage.

Any Advice sincerely appreciated
73. John VK5PO


--
John D. Hays
Kingston, WA
K7VE

 

-- 
MY GMAIL desktop Email accoount,
JF McRae, VK5PO/VK5SIX


Re: PRECIPITOUS EDUCATIONAL ARC

 


This web tool handles settings, with out having to go into all of the controls of alsamixer.

On Mon, Feb 17, 2020 at 7:51 AM John McRae <johnfmcrae.desktop@...> wrote:
Hi everyone.

Slowly working my way around the DRAWS/Rasp Pi...

I would like to know the sound codex I/O information please.
Seems a lot of options to choose from.
That is for setting up JS8Call at this stage.

Any Advice sincerely appreciated
73. John VK5PO



--
John D. Hays
Kingston, WA
K7VE

 


Re: PRECIPITOUS EDUCATIONAL ARC

 

This groups.io group is intended for this type of discussion.  Feel free to ask your questions here.


On Mon, Feb 17, 2020 at 7:51 AM John McRae <johnfmcrae.desktop@...> wrote:
I have started A FB group with the aim of helping out / being helped fellow users of the DRAWS HAT, as I navigate my way through getting it all up and running.

I have WSJT-X up on the screen, but need some guidance on what
AUDIO SETTINGS are required. Many to choose from.
Help please!!!
John, VK5PO

the FB page is;
https://www.facebook.com/groups/2524564897653251/



--
John D. Hays
Kingston, WA
K7VE

 


Re: PRECIPITOUS EDUCATIONAL ARC

Charles Blackburn <wx4cb@...>
 

thanks for creating this.


i'm still waiting for mine, hopefully they'll be shipped soon. i'm getting a little frustrated LOL


charlie

On 2/17/2020 2:28 AM, John McRae wrote:
I have started A FB group with the aim of helping out / being helped fellow users of the DRAWS HAT, as I navigate my way through getting it all up and running.

I have WSJT-X up on the screen, but need some guidance on what
AUDIO SETTINGS are required. Many to choose from.
Help please!!!
John, VK5PO

the FB page is;
https://www.facebook.com/groups/2524564897653251/



PRECIPITOUS EDUCATIONAL ARC

John McRae
 

Hi everyone.

Slowly working my way around the DRAWS/Rasp Pi...

I would like to know the sound codex I/O information please.
Seems a lot of options to choose from.
That is for setting up JS8Call at this stage.

Any Advice sincerely appreciated
73. John VK5PO