Then WSJT-X-- John D. Hays Edmonds, WA K7VE

I don't believe so, I installed direwolf first then fldigi. -- John D. Hays Edmonds, WA K7VE

John did the setup, I’ll let him elaborate.

Bryan, Should we take this observation to mean that installation order might be a factor? Did you install fldigi or direwolf first? Thanks, Jack KD4IZ -- J Spitznagel Science River LLC KD4IZ

Good! I Have dire wolf and fldigi installed on my reference machine and they both work, one at a time.

Hi Bryan, I think you got something here. Even though I never ran Direwolf, and it was not running in the pid list I did the following: sudo apt-get remove direwolf I rebooted and Fldigi works in

Hi Bryan, I'm not running Direwolf, this was for dedicated HF Fldigi/JS8call work. I did the install package line item below, as the line out of the script but did not invoke it or set it up at

When I was trying to install Xastir, exactly the same occurred to me after I tried to invoke X from inside a terminal window with the command “startx” while running the GUI already. I found the

After modifying config.txt file as specified and rebooting, Compass asks for my login, accepts my password, the screen blanks for a moment and I am presented with the login window again. If I type an

Art, We do test the DRAWS Hat on HF and have it working on different radios. Obviously, we don't have every model of radio or physical wiring configuration. However, there are tools and advice to

Rick, I guess I am not sure what you are looking for? The sound CODEC on the DRAWS Hat can certainly convert analog audio to digital analog (typically PCM) and back. Transcoding and routing is a

John Thanks for the information, I currently have an XC-3006 that I'll be using for dstar and will have 2 others a located for analog, I would like to avoid using dstar and would prefer to

Is Direwolf running? You can’t run Direwolf and FLDIGI at the same time. This is a sw issue that we’re working on.

Hi John, while this works for Dierwolf on VHF/UHF radios, the mixer settings are not working on HF radios using FLdigi , WSJT-x, or JS8call. See my other posts to Bryan on this issue, the work around

https://nw-digital-radio.groups.io/g/udrc/message/2072 Or search in the group for #fldigi -- John D. Hays Edmonds, WA K7VE

There should be a space between /dev/ttySC0 and /dev/pps0 in the gpsd config. Brian N0KZ

can you post an example of what the output should be? while I am not new to linux I usually don't poll hardware level stuff. 73 Art

The space goes between the 0 and the /. Those are file names for two different devices. When you run them together, you are creating a file name that doesn't exist and so the program can't open it.

I have done that too so will keep plugging along till I get it.If not just have to back with lap top and sound sard if all else fails Thanks Sent from my Verizon, Samsung Galaxy smartphone

Brian, Is this the same issue I see below? I have had what seems to be a similar issue after using the provided Alsamixer script then trying to use direwolf (and xastir) with both FT 817 and IC 7000