Great news. It seems that having all six pins connected makes the 817 unhappy. Basil said they know the problem now and will look for a solution. And having told you how successful I was, now I

fldigi allows you to key the radio using the gpio pin interface (12) to mini din-6 (left) -- John D. Hays Edmonds, WA K7VE

Hi Joe, You have a radio I do not know anything about. I’m only about a week ahead of you in learning how to make DRAWS sing. I just happened to have been working with fldigi and my IC-7000 and

Jack Next issue is with getting the radio to transmit. First off, I have used Fldigi with the TM-V71 many times on vhf uhf with success using a signalink and a sound cards with simple

Basil, Thank you for the update on the 891. I only operate HF portable, so I connected the dummy load and corrected to: " If your radio is set for DATA (PSK) operation use ALSA settings IN2_L

Jack Thanks, Indeed ax25 was not shut down I ran ./ax25-stop after ./ax25-disable and that did the trick. In the fldigi set up port audio lite up and I was able to select hw udrc 0.0 for capture and

Before you update your image capture your current alsamixer settings somewhere. Just run ./n7nix/bin/alsa-show.sh & make a copy of result. Latest image current_beta.zip has been updated to

I would just like to take few minutes to thank everyone for their testing and feedback on the images that we have for the DRAWS™ HAT. We have key people at NW Digital Radio all looking at the

First of all, thanks for all the time you are putting in. See suggestion for PCM, LO Drive gain below. Check this out by John Ackermann N8UR Look for: "The No-Test-Equipment Packet Adjustment

Joe, Check to make absolutely sure that Direwolf is not running after your reboot. If it is not running, you should see PortAudio as a selectable option. Check the box. Now Select udrc: - (hw:0,0)

Basil and All, Tried to take a scientific/stepwise approach with setting the DRAWS board audio out today. I went through the entire level and deviation check routine again today and wound up

I am looking for some basic guidance on getting fldigi configured for VHF and UHF. I have been successful with the DRAWS Beta 5 image and running Direwolf/YAAC and now that I know the "core image"

Fixed typo for FT-891: IN1_L & IN1_L -> IN1_L & IN1_R IN2_L & IN2_L -> IN2_L & IN2_R /Basil I've been staring at the FT-891 & 817 Yaesu manuals and discovered the following for those 2 radios:

Basil, I have an 817 that only get taken out of the closet to keep the battery healthy. I bought it for my daughter, but she isn't ready to commit to a home station. I purchased a DRAWS to support the

quick update: got rid of imagemagick (xastir breaks and can't find it), used graphicmagick instead Also, I still cannot get the gps to update in xastir. It works fine in YAAC and it shows the fix/time

I've been staring at the FT-891 & 817 Yaesu manuals and discovered the following for those 2 radios: (Warning I do not own either of these radios) You need to match your Yaeseu radio configuration

There is a wiki, it needs more content. If anyone wants to offer up some content, contact me. https://nw-digital-radio.groups.io/g/udrc/wiki/home

Ok, so I'm running xastir 2.1.1... and i'm having issues with the gps I have the networked gps set up and when I run gpsmon it shows i have a valid fix, however when i go to view -> gps status in

Thanks Jack Would love to have a sked with you, perhaps during winter field day!? Yeah, regarding the DRAWS, I know my post was a little harsh, but I find leaving out the diplomacy puts everybody on

Julian, Good to hear you say this on two levels. “We Are Not Alone” and more importantly, “It Can Work”. I am “itching” to move on to playing with DV mode (HF and V/UHF) stuff, but