I noticed that killing direwolf on Compass Linux beta 1.5, ax.25 interface udr0 and udr1 are removed freeing access to draws sound card. sudo killall direwolf is a quite simple

Good idea. I will do that. Merry Christmas Ve3obo

Merry Christmas Julian All of the adjustment I made to the receive signal was through the ADC Level of the alsa mixer. FLDIGI has a go no go "diamond shaped" icon on the bottom tool bar

Excellent write up Joe. Did you adjust any other setting than adjusting ADC level in alsamixer for receive level? Outstanding post. Thanks for sharing Julian Julian

Bob Can’t speak for this implementation as I am waiting for the next DRAW run to be shipped. However my experience with other rpi implementations, my SD card contained a single image. I make sure by

Bob, That is a mistake I often make when I forget and reflexively try to use DOS/Windows conventions in LINUX. It is confusing. You want to be in “~/bin”, not “/bin”. note the “~”! In the

Gents I wanted to share the good news of having success with the Beta6 image of draws with Direwolf , YAAC and a leap today with fldigi running on a Kenwood TM-V71 dual bander. I

Tired, I meant "ALC" Julian OH8STN www.oh8stn.org www.youtube.com/c/OH8STN

Hi John Adjusting audio output level to 0 (zero) worked and I'm being heard on pskreporter now. Art send his 891 settings, which I hope will help with the receive levels. I'll give those a go after

Thank you Art Julian OH8STN www.oh8stn.org www.youtube.com/c/OH8STN

Forgot You asked for output from ./showudrc.sh I get bash: ./showudrc.sh: no such file or directory. I was in /bin Bob ve3obo

Merry Christmas, Basil. I dont expect to hear back from you for a few days. I am trying to get wsjtx and js8call running. I did have this working so I know the 817 radio is ok. I could not use the

Naturally yes, but not the full range of the sitting. I'll continue the testing with that and report back. Enjoy the holiday guys. Julian Julian OH8STN www.oh8stn.org www.youtube.com/c/OH8STN

Have you looked at the digital mic gain? (FT-817 Menu 25)

FYI, I was able to get my FT-891 to work before a beta image was available following the script to set the mixers to HF audio out instead of DISC out. On Beta 5, I had to run the disable ax script

Jack Thanks, no apology necessary. You gave me the info needed, I forgot about fldigi capability to address Pi GPIO and John K7VE reminded me. I am a bit gun shy on all the traffic

There is no wiki dedicated to getting setup/started with DRAWS and HF Digital modes. There is information on DRAWS & Packet Radio. For the HF Digital operator, the very first thing they need to do is

Thanks Basil Would you look at the picture and provide a little bit more clear information? Even a screenshot, with edited settings for those two radios would be excellent Thanks for the

if direwolf & ax-25 are already stopped then running ./ax25-stop does not respond with anything. type pidof direwolf if no process id is printed direwolf is not running try starting & stopping

I am a newbie to RPi and linux. I have the beta6 installed and running. I cannot seem to be able to stop direwolf and ax25 so that ft8 and js8call will get access to the draws sound card. I