Bob I have been had more than once with the underscore. Depending on what you view it with, printed or on a screen, it can disappear! I found that the disappearing act is most

Budd, If you have the GPS attached as a refclock, and it is active, it is actually a better time source than the Internet ntp servers. -- John D. Hays Edmonds, WA K7VE

Use the program sudo raspi-config to set the hostname, and then reboot. -- John D. Hays Edmonds, WA K7VE

Budd Churchward <budd@...> writes: It's a little confusing because the DRAWS image uses chronyd for the NTP service and NOT ntpd. So there are 3 situations: No gps antenna No Internet

There is a link to the download site here: https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started click on 'Go to the download site' It's this: http://nwdig.net/downloads/ The

Usually get this symptom if you set the hostname then do not do a reboot. See instructions here: https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started Note the "Now reboot your RPi"

My experience with NTP service is that you need to keep it active. If you let it set the clock on the Rpi and then keep running without the internet connection the time on the clock gets pretty far

I think I screwed up during installation of draws beta 6. At one point I was asked for a hostname. So I made one up and entered "bobspi". Now I am often getting "sudo: unable to resolve host

Julie, You may have gotten the wrong URL. I get a 404 error too. The URL I am using is udrc@nw-digital-radio.groups.io and I also prescribe to the message streams. I think that the beta6 image

As has been discussed previously. NTP services like chrony slowly adjust the system clock based on information obtained from both ntp servers and refclocks (like the GPS and PPS). Basil has created a

So, in the majority of whatcom county, from my understanding almost everything is handled via fsq, I think a few other modes are used for transmitting data however I don't think ampr (44 net) is used

i think you have to have the battery installed for the rtc.... it takes a bit to get the signal and then set the clock. I'm assuming you did the chrony and gps install as described in the wiki?

Go to http://images.nwdigitalradio.com/downloads/

Thanks for the response. I have control over nwdig.net/downloads and is the server where the image lives. images.nwdigitalradio.com is supposed to link to that address but is broken please use

Tony, Many thanks! :) 73, julie /ac0wn

http://nwdig.net/downloads/

It's not you. I get the same thing. Maybe they are working on it. Bob ve3obo

DRAWS™ Raspbian Images Current images are at http://images.nwdigitalradio.com Did I go to the wrong location? This link gives a 404 error on several different browsers. Any direction much

All NW Digital Radio Products come with a 1 year warranty and a 30 day money back guarantee. Contact sales@... to receive return authorization if you would like a

Hi Ed, We don’t know yet. As an owner of one of those radios, I am trying to figure out if this is the case. You may or may not need something else. Hope to have some answers fairly soon. NW