Hello All: Unfortunately, the Icom IC-718 has only two connectors that can be used for interface (other than the mic input and the headphone jack): The 13-pin ACC connector and the CI-V jack. The

Thank you.

Basil, I followed the directions in Get Started.  I think I answered a prompt incorrectly regarding AX.25. When I run ./app_config.sh core now, I get the "Already ran" statement. I get the same

Many hamlib applications can be set to use VOX to the radio directly.

# Get the latest versions of scripts cd cd n7nix git pull # Refresh the local bin directory cd config ./bin_refresh.sh # Check you ax25 status cd cd bin ./ax25-status # start direwolf & ax.25 sudo

Ed, If you are referring to XASTIR's Interface drop down window, I use the following after I select "add" which brings up the "Interface type I/F Control" Select AX25 TNC, which brings up "Configure

Ed, I am using the AGW interface here. Jack – KD4IZ

Once I have A25 and Direwolf running, what Interface option do I select in Xastir? 73s, Ed, KD9FRQ

My radio and cable arrived. I missed something in the config script for A25 setup. What do I need to do so the ./btest.sh -P udr0finds the DRAWS channel? My results are: Status for direwolf.service:

Perhaps this widget from the BPQ software collection will help out. I have to use it with the IC-7100 to do packet. http://www.cantab.net/users/john.wiseman/Documents/CAT7200.html

Hi John, Unfortunately the IC718 doesn't have PTT via CAT... I think will have a look at the source code for hamlib to see if I can come up with a generic way for it to do the GPIO keying when it gets

For applications like wsjtx, which haven't implemented native GPIO ptt keying, the best choice is CAT under hamlib, either directly in the application or through the FLRIG application. -- John D.

Oops, you said ic718 and i read 817. Sorry. Bob Orrett ve3obo

I use CAT control for PTT set up in the radio settings. Works perfectly so far. You need a 62c usb cable from the usb port on the RPI to the cat din at the back of the 817. I am assuming you are

Ed, Mtn West Digital and the greater DRAWS Community, You have a GREAT attitude Ed - we’re all here to learn. I’m way behind most of you re: Linux & RPi chops but I am focusing on DRAWS as the

Brian, Thank you. I do not consider it a rude interjection. I appreciate the opportunity to learn. I got a little lost in understanding the OS side of things in LINIX and using the

Hi, I have just got my DRAWS setup and I am trying to run WSJTX but I was wondering how to set it up to activate the PTT on my IC718? (I suspect it isn't supported just yet ) Regards Jonathan

Ed, (Inserting my opinion rudely) An example would be the alert sounds played by YAAC when APRS messages are received or emergency beacons are detected, etc. In my case I route that audio out to HDMI

Correct.

Mike, Thank you. So this for getting the System Sounds out to the speak so one can hear the OS sounds or program sounds that are sent to the OS for user interaction, correct? 73s,