Team - If you want to do a clean install of BETA9 you will need to edit app_config.sh depending on what you want to install. If you are doing a clean install and following the WiKi Getting Started

Basil, Trying to do a clean install of the Beta9 image. It appears the app_config.sh core script has been changed such that it does an install of rmsgw. This in turn breaks the ax25-start script. I

Per owners manual of the TS-440 it should be 500mV or less. I’ve attached a screen shot of the only page that addresses input voltages for that connector.

Before you update your image, please capture any configuration changes you might have made like current alsamixer settings. Run alsa-show.sh & make a copy of result. Latest image current_beta.zip has

John, WB2OSZ, I am using a pre-installed/configured version of direwolf that is included with the Raspberry Pi image. I use a provided shell script to start and stop direwolf. In order to run

Basil, Thanks for taking the time to investigate. Any information is worth having. John KM7LJ

John, Thanks for the files. You are having a problem with Pat timeouts. I support paclink-unix as a Linux Winlink client/transport and not Pat. It looks like you have a pending message coming in and

Attachment and console output sent to your personal address. John KM7LJ

Thank you Anna!/basil

This is the fix for the 4.14.98-v7+ kernel breakage. There is a conflict with the udrc driver and the AudioSense-Pi drivers. If you have done an apt-get upgrade & the udrc sound card has disappeared

There are two different ways that applications can use direwolf as a TNC. (1) As a stupid KISS TNC. In this case the application is totally in control. The stupid TNC just does what it is told.

I know of a timing problem in paclink-unix but the file sizes are in the 10k to 20k byte range. Could you please send the file you are trying to send as an attachment to my personal email address, not

k7udr posted: "As we come to the end of February all parts are in house or in transit. Once the last few parts arrive we will secure a 5 day assembly turn. At that time we'll provide a ship date. We

Try section 10 - https://github.com/wb2osz/direwolf/blob/master/doc/User-Guide.pdf -- John D. Hays Edmonds, WA K7VE

I am sending/receiving Winlink messages using a Raspberry pi with the DRAWS hat. All is well as long as the messages/attachments are short, less than a couple of kBytes. When attempting to send longer

Nice work John! Looks reasonably intuitive. I suggest that you add: * On screen PTT indicator * Button to toggle PTT on / off * Button and slider for various test tones, including varying tones so you

See - https://www.youtube.com/watch?v=v5C3cWVVz_A

oh crud =(

Basil, Thanks for replying so quickly. Cutting the pin 6 squelch line did indeed solve the problem. For some unknown reason I had associated the squelch issue with HF and did not check at VHF/UHF FM.

We have determined that upgrading to kernel 4.14.98-v7+ is breaking access to the DRAWS™ HAT (UDRC) driver. Please do not do a general apt-get update apt-get upgrade until we resolve this