Hi Basil, thanks for the update. All commands figuring out whether gps works report a normal behavior of the gps module. However, when I tell direwolf to beacon regularly the position taken from the

Hi Rico, Thank you for sending the output to showudrc.sh Everything looks to be OK for the DRAWS hat. I just configured a new instance of Xastir and find the same symptom as you do. I have a call

Meanwhile I found out that there seems to be a problem between direwolf and gpsd. When I tell direwolf to beacon with the position taken from gpsd and I read out 'systemctl status direwolf' it says

Hello Basil, here comes the output of showudrc.sh. It’s quite long… After the listing you can find a screenshot of the settings for the GPS. I hope that’s what you meant. Many thanks for your

Also provide the output of showudrc.sh as I previously requested. Without this output and what John requested I can't really comment on your problem. /Basil John D Hays - K7VE <john@...>

Provide your Xastir configuration information for the GPS connection (screen shot?) -- John D. Hays Edmonds, WA K7VE

Hi Basil, That’s easy: I’m running the latest beta. Somehow Xastir doesn’t get data from the gps. / Rico DG5BQ Von meinem iPhone gesendet

rico@... writes: Need more context. Please describe the problem you are having in as much detail as possible. Also paste the output of showudrc.sh in the email. /Basil n7nix

I do have exactly the same issue. Could anyone help, please?

Yes to both. /Basil jgindc1@... writes:

Is it possible with paclink-unix to: a. add attachments, and b. work peer-to-peer? John KM7LJ

Basil et al, I goal is : 1) HF only setup that uses the DRAWS to two HF Rigs 2) paclink-unix e-mails and all WinLink forms (still need to learn how to access them) on one channel with auto-send and

Yes there is a web Interface to paclink-unix transports. It looks pretty clunky as I am in no way a 'gui guy' but it does work & has been around for a number of years. The default install of

Ed Bloom, KD9FRQ <ewbloom@...> writes: Can you please describe what you want to do in more detail. Running direwolf/packet on one channel of the DRAWS card & HF on the other channel has been

Is there a GUI overlay for paclink-unix? And is there a timer function so that it checks to send / receive every X minutes / hours (operating under the premise that the Gateway is up, stable and

As the ship dates draws near....I am starting to gather the needed stuff to handle two HF rigs. I am at a loss to find the directions for running the ./app_config core for HF (if there is a

k7udr posted: "Components are in and we have a 5 day assembly turn scheduled for March 8th. We will begin shipping by order date, the week of the 11th and should have all backorders shipped by the

app_config.sh needs an argument. I'll change it so that it will error out if you do not provide one. /Basil

As the Getting Started Guide points out you need to run ./app_config.sh core https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started The app_config.sh script takes an argument DO NOT

Team - If you want to do a clean install of BETA9 you will need to edit app_config.sh depending on what you want to install. If you are doing a clean install and following the WiKi Getting Started