I used https://draws.local:8080 and received the same error message several second after commanding Update DRAWS Manager

John D. Hays Edmonds, WA K7VE

Your DNS resolution isn't working, you will need to sort that out in the OS, if you are using DHCP to get an IP address it should be setting your DNS resolver. Open a terminal a try pinging some

On the pi, in a browser it's http://localhost:8080 On another computer on the LAN, use the LAN IP (ifconfig to find it on the pi) of the pi, e.g. ip address 192.168.0.40 would be

Is your RPi connected to the Internet? You can upgrade all your files including draws-manager by: cd cd n7nix git pull cd bin ./prog_refresh.sh /Basil n7nix Fred Hirsch via Groups.Io

See beacmin.sh & btest.sh scripts in n7nix/debug My suggestion would be to use a script that pulls lat & lon from gpsd and sends a position using AX.25 beacon command. Both of the scripts send a

Put it in Chrome on the pi. In My case 192.168.0.79:8080. You need to get you IP address for you pi, then add :8080

John, Don't know how to capture dialog so I am picking out the error when attempting an update from DRAWS Manager: fatal: "unable to access https://github.com/nwdigitalradio/draws-manager.git/":Could

Im having trouble understanding how to get to the manager. Do i put the ip address in my browser on my PC or from the Pi?

Yes the raspberry pi.

I will get you error messages tomorrow. In regard to you question the Raspberry is connect to the internet, so I was assuming the DRAWS was also. Fred

I got the Draws Hat this afternoon. Loaded image, got Direwolf running. I have an old Icom 28h I have gotten an old adapter using the KPC 3 DB 9 plug plus a speaker plug for audio. Using a USB and

Thanks guys. I found fldigi under internet. Rick Ka4ohm

I've posted over a xastir. I've also deleted and installed from git a fresh version of xastir with the same results. It's just weird that I had it working in beta 9 and now it won't work. I might just

Is your DRAWS™ connected to the Internet? Always include error messages. -- John D. Hays Edmonds, WA K7VE

I am having two problems with the Manager. (1) It will not save the audio settings. I save them but they are lost on the restart. (2) When I try to do an update from the Manager it errors out

I haven't had a chance to really dig in to how things are set up yet, but it sounds like the Direwolf service may not be running - so you may need to start it, or might even need to set up

There are two approaches: 1. Use direwolf simply as a KISS/AGW/NETWORK attached TNC and let the applications generate the position data (eg. YAAC) 2. Make sure gpsd is configured in direwolf.conf --

I know this is more of a software question but I'm trying to figure out how to get direwolf to beacon APRS with position. I enabled the lines in direwolf.conf but it doesn't seem to TX and I don't see

Bob, Thanks for the explanation. Maybe a pointer or a visual added to the documentation will prevent the confusion of folks new to the setup. I have had some “Ham” programs automagically