pi@draws:~ $ journalctl -xe Apr 18 23:17:15 draws direwolf[1909]: Audio device for both receive and transmit Apr 18 23:17:15 draws direwolf[1909]: Could not open audio device default for in Apr 18

Please send me the console output of: journalctl --no-page -u ax25dev.service /Basil Bjorn Pehrson <bjorn@...> writes:

Bjorn Pehrson <bjorn@...> writes: Yes! Thanks for your help. Steve, N9VW also verified that the on-board audio device driver load order is the problem. I have never seen this problem on any of

If I try to start it (it is not in the path), I am back to starting the mheard service not terminating /home/pi/n7nix/systemd/bin/ax25-start pi@draws:~ $ sudo

Basil, Here you go. It appears that commenting out the audio fixed the problem. Seems like progress is on the horizon Steve On 4/18/2019 1:31 PM, Bjorn Pehrson

Hm, there seems to be something more Now the card is there but ax25 is not running pi@draws:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835

Basil, Here you go. It appears that commenting out the audio fixed the problem. Seems like progress is on the horizon Steve

Seems to have made the trick..., thanks a lot pi@draws:~/n7nix/bin $ ./hwtest.sh  === Verify AudioSense-Pi drivers are not loaded. AudioSense drivers NOT loaded.  === Verify Sound Card is

Thank you Bjorn!! Thanks for providing all your console output! I have never been able to replicate this symptom on any of my RPi's. If you can do one more thing for me I will buy you a beverage of

--------- exit pi@draws:~/bin $ cd pi@draws:~ $ cd n7nix/ pi@draws:~/n7nix $ git pull remote: Enumerating objects: 39, done. remote: Counting objects: 100% (39/39), done. remote: Compressing objects:

I am trying to understand why the Draws udrc driver is not loading. Could you please get the hwtest.sh script and show me the results. Specifically: cd cd n7nix git pull cd bin ./hwtest.sh # Then

Here are the logs ----------------- root@draws:/home/pi/bin# systemctl status ax25dev.service ● ax25dev.service - AX.25 device    Loaded: loaded (/etc/systemd/system/ax25dev.service; enabled;

Hi Basil, I seem to have exactly te same problem with beta12 and my answers to your questions are 1: no, i only get pi@draws:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA

Jack Spitznagel <kd4iz@...> writes: I need to learn what your problem is so please do not do another install. I do not have the console output of ax25-start after your reboot & successful udrc

Hi Basil. Thanks for looking at that file. This is exactly what was puzzling me: Did exactly what you suggested previously, rebooted, and when I tried to make sure the AX25 stuff was being loaded, it

I'd be happy to help out (as you've seen by my videos) Did you get my setalsa-ft891.sh script/suggestions? I saw you were making a TON of changes for beta12, maybe for the next round? Those setting

Hi Steve, I openly admit that I suck at documentation. It was never my day job. I hope the hardware guys realize that they also suck at documentation and act on your suggestion. Also note that the

Hi JP, My lcd screen seems to auto config properly. I think you are right, each screen has unique config problems. To flip screen 180 degrees add the following to

Thanks for the console files. I need to see what they look like after the reboot. Note you do NOT need to run chk_conflict.sh if you have BETA12 image or you run prog_refresh.sh. You only need to run

Hi Jack, The attached output of show_udrc.sh shows the DRAWS driver (tlv320aic32x4 driver) is now loading. So different from your previous file & definitely a successful boot up since the udrc device