Consider 512 the minimum swap size to compile fldigi on a pi3. 256 was insufficient. I monitored it while building and the swap went up to 467MB. Thanks Chris KB7NMU

Hmm, I installed and ran DRAWS Manager from source, and set my ALSA settings using its presets. According to alsa-show.sh, the levels are tweaked a bit now but I’m still seeing the same barren field

I have uploaded a new 3D printable DRAWS case to Thingiverse https://www.thingiverse.com/thing:3783961. This is a case for Raspberry Pi 3b or Raspberry Pi 4b + NWDR DRAWS hat with GPS port on side. It

Kevin, For a complete install of the paclink-unix web server do this: cd cd n7nix/plu sudo su ./pluweb_install.sh pi # Verify with: systemctl --no-pager status pluweb.service # run a web

Kevin K. - N7KJK <kkutzera@...> writes: Yes this a problem with the paclink-unix web app install. I will fix that and in the mean time do this: npm install -g websocket connect finalhandler

Also is this section with the pluweb failed state normal? 1 07:17:06 N7KJKPI systemd[1]: pluweb.service: Service hold-off time over, scheduling restart. Aug 1 07:17:06 N7KJKPI systemd[1]: Stopped

Ok, Understood. Not sure why I didn't catch that in the man page. Thanks -- Kevin J. Kutzera CISSP, CISM, CEH Cell: 206-850-7762 kkutzera@... https://www.linkedin.com/in/kjkutzera

Kevin, You need to change 'gunn' which is my user name to your user name probably pi. ie. # [N7KJK VIA udr1] NOCALL * * * * * * L default * * * * * * - pi /usr/local/bin/wl2kax25d wl2kax25d -c

Thanks Basil, So I've read the MAN pages for both wl2kax25d and ax25d. Somewhat illuminating.. A friend of mine tried to connect using both N7KJK, and N7KJK-10 (my Winlink Gateway address). He

Hi all, Silly thought just occurred to me… one sore point with the Raspberry Pi is that the device provides no audio I/O apart from the PWM audio output. Now, the UDRC/DRAWS is a big improvement

https://nw-digital-radio.groups.io/g/udrc/topic/drawstm_manager_demo/30031339?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,30031339 Since you have a Pi 4 you may need to install from

Try DRAWS ™ Manager It should set levels properly.

I've been trying to get my Raspberry Pi 4 working with my DRAWS hat but I think either my connection is messed up or my audio setup / levels wrong. I've followed the Google Doc on how to set up

FWIW, the “Pi-Fan” brand fan that came with my case is _extremely_ quiet and can barely be heard even from a foot or two away. A big passive heat sink could possibly help, but the “hat”

I like the idea of not having to have a fan ... maybe. lol Orienting heat sink fins vertical and given that warm air flows up, makes the best use of passive cooling. Can you tell that I am an

I am hoping the Pi 4 draws less than 20W. I run completely on solar power and looking for a desktop replacement with DRAWS. Fan noise can be mitigated. I have a 2n1 laptop/tablet that draws about

It's a personal perspective, but I don't want a fan on an appliance like a DRAWS. Fans are noisy. They suck dust in and spray it all over the board. They're non-static hardware that will inevitably

Library libjpeg9-dev is installed from the HF programs install script. ~/dev/github/n7nix$ find . -iname "*.sh" -print | xargs grep -i

We found the fix. Ironically NWDigital sent out this fix in April, but never put it on their own image. From their groups.io: See email from 19 Apr. You need to install libjpeg9-dev sudo apt-get

Hi Budd, I'm assuming you launched flmsg from an icon or menu item. If you want to look at what's going on start flmsg from a console. The most common problem with flmsg not starting is that