Good morning Frank. I no longer have your image - I overwrote it with a clean Raspbian Buster image and then used John Hayes (k7VE) instructions and Basil Gunn's (N7NIX) scripts to build a working

Hi Edouard, Where did you get kernel 4.19.69-v8+? The best I can do this morning - Sept 5 is 4.19.66-v71+ with sudo apt upgrade and 4.19.69-v71+ with sudo rpi-update on a Pi4. Both of them have the

One thing I have noticed about those discussions whether udrc/draws works or not on various Pis: the necessary codecs for the DRAWS/UDRC seem to be hit or miss in the latest kernel module

I meant pin 1 for audio

and as requested I checked pin on at 50 mv setting no audio, receive work fine Rob k6jus

last post I had no audio I checked with an o scope and posted the settings and it seams like looked at my settings to see if I missed something. receive works the radio work with my signal link so I

Hi Rob, I’ve been tied up with moving both my home and the office. Internet has been hit and miss. I’ll take care of your refund in the morning. Thanks, Bryan K7UDR

The last post had you output a tone on the right & left channels of DRAWS hat. Did you hear the tone on another radio? Did you check both channels with your o-scope? You mentioned that you didn't

I sent a message yesterday morning and this morning and got no responce

What? Why a dispute, just contact sales@... if you have a return request. -- John D. Hays Kingston, WA K7VE

well all went quiet I guess ill dispute with paypal

Hi Edd, I tried doing the expand and then changing the system name, the password, set ssh and vnc, set the timezone to Denver, and connected to my wifi. GPSMON was still working. Rebooted and GPSMON

Hi Edd, That is useful information. I'll look at it as well this evening after work. As long as the interface to the hardware is working then it may be gpsd is getting confused with the time change.

Frank, I reimaged the SD card from your (original) file and it again boots. I expanded the file system (raspi-config opt 7 Advanced, option A1 expand file system) and rebooted. Yes GPSMON runs as it

Whoops - Auto Correct got the better of me - it is sudo raspi-config. 73 - Frank - K0FEI

Hi Guys, I have re-uploaded the image as the .gz file that Etcher will transfer to a SD card. You will want to expand the file system first thing - sudo rasps-config then select option 7 - Advanced

Hi Edd, It may have been better to have not run the prog_refresh.sh script. I am not sure what it does and those scripts have not been changed to reflect Buster and the drivers being a part of

I apologize - I deleted my message that started these comments once I realized the .xz file was compressed. I used 7-zip to uncompress it (internet search told me how). Etcher loads the resulting .img

zip definitely works, i did that yesterday.

Well darn. It seems this taring it to an .xz file was not compatible with Etcher. You can uncompress the .xz file (tar -xJf Buster-Draws-2019-09-01.xz) and flash the resulting .img file to the SD (I