I have a -62 Cat to USB Serial on hand. So, for the FT-897/857 we need two cables, one for CAT and one for Audio via the DRAWS. So, to which port does DRAWS cable connect?

I’m working on a similar issue with FT-857. Finally realized that I needed an additional cable for CAT. Ordered an 8-pin mini-din cable and located a source for the header connector. I’ll post

Has anyone connected their DRAWS to an FT-897 yet? I am looking for some assistance. Specifically, cabling needs for the setup. It looks like from all I have read, I still need a USB to Serial to run

Yes. This is the simplest way to do these because if you need to relay it by voice, it's "paint by the numbers". Super simple. Date and Time stamps make the message unique along with the

Good to know - thanks, Mitch! That explains why the body of the message that I was using as a template is formatted the way it is (screen shot from my write-up): Thanks for the

I do not send a k2s file. The file I send has an html extension. Basil Gunn <basil@...> writes:

Ryan Matthew Headley <headley.ryan@...> writes: How did you receive it? In Winlink Express click on attachment paper clip which will prompt you for which browser to render the file with. this

And then I attache the k2s file to a message and receive it in Winlink Express, this is the content that is received: <flmsg>4.0.14 :hdr_fm:21 W4EAE 20192211195114 :hdr_ed:21 W4EAE

Yes Please read the manual: http://www.w1hkj.com/flmsg-help/ All custom messages should have file name extension ".k2s" /Basil

When I start flmsg in a terminal, this is the output after attempting to open the template (which still look good in the browser at this point). I think that this may be the source of the

Please be more specific. What UI were you using Expert or Simple? Try both. What does this show: In Expert UI file > View > HTML delivery Start flmsg in a console. What is the console

This is where I am lost. Do attach the k2s file to the email? And what is a k2s file? -- *************************** Ryan Matthew Headley 1705 Granby Road Cayce, SC 29033 USA mobile -

Ryan Matthew Headley <headley.ryan@...> writes: What directory did you save the message to? ~/.nbems/ICS Compose a message using your mail client & attach your new message to the Winlink

I tried one more thing. After completing the form and saving the k2s file, I attempted to open it again with flmsg. The form came up and was completely populated by non-ASCII gobledygook.

First off, I backed up and followed the steps you listed in successfully sending a form. I have now gotten as far as creating a 'K2s' file (never seen that before) which theoretically contains my

I just confirmed what I last posted worked as expected. If you want more help please be more specific. ie. what ICS form are you using and as much detail as you can describe. What version of Linux:

This is what I did: cd cd .nbems/CUSTOM wget https://downloads.winlink.org/User%20Programs/Standard_Forms.zip unzip Standard_Forms.zip flmsg <Using 'Simple User' Interface> click file > template

OK. After a restart of the Raspberry Pi, the ICS form now appears on the CUSTOM list in flmsg. However, once the form is completed and I click 'Submit' at the bottom of the webpage, I am returned to

Sorry for the hasty response. The meat of it holds though. After downloading the html files, moving them to the CUSTOM folder, running flmsg, and selecting 'CUSTOM'; nothing shows up except 'Transfer

These instruction simply do not work. I put the form download form into the 'CUSTOM' folder, and nothing shows up. -- *************************** Ryan Matthew Headley 1705 Granby Road Cayce, SC