Ok folks, I have installed Direwolf with a DRAWS hat using the basic Raspbian image with desktop only. 1) My APRS info is getting through IGate but is unverified and is not present APRS.fi raw data,

Understood. I can plug in a cable. Thanks for helping sort through a bit of confusion. david

I haven't tested my hostap scripts in some time & the systemd folks have been continuously mucking with network underpinnings for a number of years. I need to verify my WiFi networking scripts that

Awesome!! So is the hostap mode part of NWDR image and how to enable it? That is WiFi without my home router correct/ hotspot is that the correct term?. I tried to do a hotspot switch from other

Hi David, Short answer: For a display I use an Android Samsung Galaxy TAB A running a browser. nixtracker is a fork of Dan Smith's dantracker that used a hard wired LCD display. nixtracker is a

Basil, when you use nixtracker mobile, what are you using for a display and is it hardwired to the RPi or not? tia, David, Ke7rgp

You need to actually configure paclink-unix. Please read: https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started "More Packet Program Options" Correct. Whatever the project installs

Pick one program at a time, for FLdigi using a DRAWS hat: Fldigi configuration ->Rig->GPIO Select BCM 12 for left mDin6 connector Select BCM 23 for right mDin6 connector Read this for

OK. I have refreshed my system with the V15 image and am back to the same problem on HF as stated before (no pwer out or rig key on FLDigi, WSJTX, JS8Call, etc.). Here is what I reassembled and

Two things about this release so far: Paclink-Unix won't run (out of the box) because the wl2k.conf file hasn't been updated with the callsign, gridsquare, axport, and Winlink password. The image

I will add that there are a large number of applications that can use the DRAWS™ HAT. Almost none of which are developed or maintained by NW Digital Radio. They have their own release schedules and

J P, I'm not very motivated to write a configuration back-up program. The following is my thinking, flawed as it may be. 1. I can regen any of my RPi units from a blank mSD card in 30 minutes or

JP, If ever there was a teachable moment, this is it..!!! The underlying theme with the DRAWS product is to put the Amateur back into Amateur Radio. You have already done most of

Basil or other gifted scripting author, This is just a thought If there was a first release of the new year that was going to SIGNIFICANTLY be a game changer, this is it. !!!! Missing from your

Jim Erickson <jim@...> writes: First, thank you Jim! Second, attribution goes to Anna NH6Z as she created the split-channels repo last April. The scripts in the n7nix repo, split_install.sh,

Release image nwdr15 Jan 23, 2020 last image nwdr14 Oct 07, 2019 Latest RPi image current_image.zip has been updated to nwdr15.zip at this location: http://images.nwdigitalradio.com/downloads There

Wait until you get into the split channel stuff that Basil has been working on. It’s game changing in that you can run APRS and FLdigi at the same time, two different radios, same Raspberry Pi.

I had a little trouble finding the getting started stuff since it wasn't a sticky message BUT I did find it and everything verifies OK so far. The app to start and stop ax25 is a huge deal in

Good. I will fix that in the current image so the latest kernel is installed. Use the Getting Started Guide https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started The purpose of the

I just did the image download and apt-get from the Raspi script today so the kernel I have matches what you listed above: 4.19.93-V7 Are there docs for V15 for install and config? I am not sure what