Paul, This is still a beta work in progress. Basil has done and outstanding job at making this work. There really isn't an UNDO script for running the getting started scripts after entering bad or

Thanks Jim will check it out! Paul KO4BCZ

Paul, you’ll find the Direwolf config file at /etc/direwolf.conf In there you’ll find the auto generated passcode for aprs. 73 Jim

Basil, I forgot to include the console output for the showudrc.sh. here it is.

Basil, I went back to my NWDR14 build to see if i could remember what the issue was, attached is an output file: NWDR14 Rebuild.txt But perhaps this is all you will need to know: #Configure core

Basil, I will really enjoy this interface in the truck. A quick question, on the CTRL tab, what do I type in the Confirm box? A more complex question... if it is not a simple answer and you don’t

And exactly (with console output) what problem are you having with the image? Also, when you get a chance, switch to the NWDR15 image. If you use the NWDR image there is nothing to install. If you do

http://n5dux.com/ham/aprs-passcode/ This one works! Paul, KO4BCV

The easiest thing to do is to just google aprs passcode. The first hit is the following website which will calc your passcode for you: https://apps.magicbug.co.uk/passcode/index.php/ Results: 404 Page

Paul Noa 16:15 (1 minute ago) to udrc Basil, Thanks for your response. 1. Your questions don't have anything to do with udrc or draws. You would be better off asking them on the

Yep. Feel privileged that John monitors the udrc/draws forum. The easiest thing to do is to just google aprs passcode. The first hit is the following website which will calc your passcode for

Yep you found a bug. Thanks! Fixed with this commit: https://github.com/nwdigitalradio/n7nix/commit/abd192b0cca7291c45462089da28f9510afb30b2 if you use ax25-start or ax25-stop as a user (not root)

Basil, Thanks for your response. 1. Your questions don't have anything to do with udrc or draws. You would be better off asking them on the direwolf groups.io site. https://groups.io/g/direwolf/topics

Hi Basil, I downloaded new nwdr15 image and ran initial setup. Then I performed app-config.sh core Following Getting Started Guide I verified ALSA settings with alsa-show.sh and after becoming

Google is your friend https://lmgtfy.com/?q=aprs+passcode&pp=1&s=l 1. Your questions don't have anything to do with udrc or draws. You would be better off asking them on the direwolf groups.io

WB2OSZ, Ha! Didn't realize I was talking to the author of Direwolf! Thank you very much for all of your hard work developing this app. In an effort to set up Direwolf, I may have not understood but

It looks like your passcode is too long. Your ILOGIN configuration should look similar to this: ILOGIN WW9WWW-9 12345 The last part should be five digits.

Please read the following to see if that helps with your HF problems ALSA settings for

Ok folks, I have installed Direwolf with a DRAWS hat using the basic Raspbian image with desktop only. 1) My APRS info is getting through IGate but is unverified and is not present APRS.fi raw data,

Understood. I can plug in a cable. Thanks for helping sort through a bit of confusion. david