I’ll post an update on the case situation later this week. Bryan K7UDR

I’ll post an update on the case situation later this week. Bryan K7UDR

I am able to send to any RMS Gateway station I can hear and at the same time any mail for me is picked up. Ed Bloom, KD9FRQ ewbloom@... Sent from Webmail access

Peer to Peer receive is not activating when an inbound request it received. I see it in a terminal window using the listen command. What do I need to change to receive inbound Peer to Peer? Ed Bloom,

Any update for customers that have been patiently waiting for cases we’ve paid for over 2 years ago?

I am struggling to send email peer to peer where the end station is using PC based WinLink and only has the call sign AB9DEF without the -10. wl2kax25 -c WA9APQ?? This returns : connect(): Address

Any ETA when a fella can get a whole kit?

Hi Bryan, I updated /etc/sensors.d/draws as indicated and I am now seeing that the +5V sensor is reading +1.17V. I have the early adopter card. Any idea why the voltage might be reading

When cases are available, the kit will be available.

I keep checking on the "stock" status of the kit and it keeps saying out-of-stock, been wanting to order the "kit" for several months now... :-(

Despite the issue with the unsoldered pin on the power connector, my DRAWS is now working great and I made a few contacts in my backyard field tests today. Love the board. Well worth the wait. Bob

Basil, Thank you for the help. I will review the link. I forgot to update the command I was given as example for packet connections. It should have been : C

Read this: https://github.com/nwdigitalradio/n7nix/blob/master/plu/PACLINK-UNIX_INSTALL.md#run-wl2kax25 wl2kax25 -c <some_RMS_Gateway_callsign> <some_digipeater> I'll update the paclink-unix man

How do I expand the command below to send to CALL-10 via my local digipeater through a second digitpeater? wl2kax25 -c CALL-10 In "packet" land, the command is :  wl2kax25 -c DIGI-1 DIGI-2

Got Mangled in the group: #DRAWS uses the TL024 Which is SW Compatible with thw ADS1015 #It's an 8 Channel ADC, but only 4 Channels are pinned out chip "ads1015-*" label in4 "+12V" label

Great! I missed that he was building. Best success to him! -Jack

John will add it to a future release, after he finishes his new home in Kingston WA

Bryan, Quick Question on that: Has John implemented this in the DRAWS Manager? Does not appear to be the case. At the bottom of current version, the status bar says: Digital Radio Amateur Work

Hello All, DRAWS Has an on-board ADC to monitor the 12V supply. Sometime after the first run, 5V monitoring was added, but the config file wasn't updated so the sensors command doesn't work

Thanks, mine too