Hello on the forum, after few month I found time to play again with the DRAWS and want to finish my started installation. First of all I want to do an update -but this failed cause of PAT and WSJTX

Basil, Understood.  I may give it a go to see if the card "lights up" after installing the usual audio suspects.  My uses are VERY specific to one application of my own creation (hence the need for

Everything looks good. Now open a new console as root and run the packet spy. listen -a Mike Lussier <mike.lussier@...> writes:

The tlv320aic codec driver IS in the main line Linux kernel so it IS "possible" that the Ubuntu, Manjaro kernels will support DRAWS. There is other support for Pi hardware in the Raspbian kernel that

Oh I have done that.  Which is why I never want to do it again :)  A repo source is much more reliable long-term.  Alternately, I could install QtCreator I guess.  That's a hammer, but may work

How to Compile Qt from Source Code on Linux https://www.ics.com/blog/how-compile-qt-source-code-linux

Qt version not kernel version

Not sure what you mean by ancient. The latest long term kernel version from kernel.org is 5.10.59 which was released yesterday. The current kernel in the Raspberry Pi Foundation repo is 5.10.52.

Basil, I have run the setalsa-tmv71a.sh and here is the output of the grep pi@UDRC-RMSGATEWAY:~/bin $ grep "receive_out=" /etc/ax25/port.conf receive_out=audio receive_out=audio -- Michael Lussier

I make extensive use of Qt for things such as MQTT and others. The version on buster is 5.11.2 which is ancient. Ubuntu and Manjaro seem to have newer versions. Has anyone had success using the

Looks like the Kenwood TM-G707 is similar to the TM-V71a. Please run this script: setalsa-tmv71a.sh Also please confirm that precomp/decomp is being used by running this command: grep

1. What radio are you using? Kenwood TM-G707 Looks like the same data you are shown below. In your radio manual look up transmit data input sensitivity. ie. for my Kenwood TM-V71a: 1200 bps:

Your symptoms are probably due to improper ALSA settings for the radio you are using. 1. What radio are you using? In your radio manual look up transmit data input sensitivity. ie. for my Kenwood

no changes were made. Just updating Basil, your instructions worked. Thank you -- Michael Lussier

Good morning all, I purchased the DRAWS and a Raspberry Pi 3B+ for a VHF 1200bd RMS Gateway project. I have a problem that I can't seem to solve but that I can replicate. I have had several users

sudo su cd /usr/local/var/draws-manager/webapp rm package-lock.json git pull Updating 0d2240c..494be9a Fast-forward package-lock.json | 5 +- webapp/package-lock.json | 8294

Did you make local changes to the files, and if so, what? -- John D. Hays Kingston, WA K7VE / WRJT-215

I followed the update string and this is the output. root@UDRC-RMSGATEWAY:/home/pi# cd /usr/local/var/draws-manager && git pull && systemctl restart draws-manager Updating 0d2240c..494be9a error: Your

Good day , I was wondering if I can get a quick favor from you. I'll appreciate if you can email me back as soon as possible. Tom

Andrew have been running it for several years on a Raspberry Pi and you are right the maps are slow. The course is long and narrow so have to pan only once. I use a raspberry pi because we work on