Yes -- G4KLX wrote a GMSK modem for soundcards and that is what is being used by the UDRC (albeit with a higher quality sound chip than typically available). This is a question without a simple

Yaesu CT-164 is the adapter cable for this. I will be providing some guidance for creating a hotspot soon. We intend to use the Wiki in the group to document setups. However, be mindful that setting

UDRC DR-1X Setup Page (copied from company website) https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC-Setup-for-the-Yaesu-DR-1X-Repeater

Hi John, Just a clarification: On the UDRC DR-1x Setup Page, ->Starting dstarrepeater, it is suggested to to use CTCSS on RX/TX in analog. I assume this applies only when running dstarrepeater

The CTCSS is so that end users can block hearing modem tones from C4FM or GMSK. The UDRC modem ignores all but GMSK.

Instructions on how to use your UDRC as a packet radio system at 1200 or 9600 baud with Direwolf https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC-and-Direwolf-Packet-Modem

John or someone else that is more experienced at this please let me know if this might work. Scott N1VG has these adapters to give the GM300 (Maxtrac etc I guess as well) a standard 6 pin DIN port.

I have some of the Argent MDIN-6 to Motorola adapters but haven’t used them yet. They appear to have some circuitry on them in addition to the connector, I don’t have schematics so I’m not sure

Question regarding the HD15 Cable option for ordering the UDRC. Are all 15 pins wired through on this cable or only the pins needed to operate with the DR-1x? 73-KY9K/Brian

All are wired. The interface uses virtually all of them. Sent from my iPhone

Excellent, thank you.

I think everything is working but when I connect to a reflector I get no DStar decode. Any ideas. Repeater comes up in Auto/Normal - Auto/Normal when I key up on Dstar the repeater goes to Fixed/FM -

Is the PTT keying? Do you see text e.g. calling station on the D-STAR radio? 2 meters or 70 cm? Did you run the script to set the audio levels. (E.g. have you followed every step in

What model of D-STAR radio? -- John D. Hays Director PO Box 1223, Edmonds, WA 98020-1223

ID-51A Duane Angles AA5KD

How about these questions?

Hi John: Do you have any recommendations for touch screens for the raspberry Pi 3. I ordered the UDRC with the 15 pin option for my fusion repeater and would like to use a touch screen for it.

Yes PTT is keying but no calling station on the DStar radio 70cm Yes I ran the script and followed every step No decode on local repeater Duane Angles AA5KD

If you listen in FM mode, with no pl tone do you hear modem tones? If you have the ability, e.g. a scope, measure pin 6. That's the third pad down next to the blue 15 pin connector. See if you are

See comment here http://nwdigitalradio.com/udrc-new-wiki-post/#comments