Yes, since dealing with the cable issue, the DR-1x is now transmitting. UR commands sent from the ID-31a are being recognized in dstarrepeater, and I can listen to the digital data stream from an

I think there may have been a sound setup script that was a little low early on, so that may be the problem. If you give the command alsamixer press F6 and pick the UDRC, the screen should look

Do I need to upgrade my other repeater to use my UDRC, it has version 1.00m. I also plan on using Wires-X with an FTM-100 as a remote.

On 1.00m you can use ANALOG WIRES-X (Config 4 on the udrc controller -- FM/FM), but your repeater will lock up if you try to do Digital Fusion (C4FM). I recommend getting the software upgrade, then

On 1.00m you can use ANALOG WIRES-X (Config 4 on the udrc controller -- FM/FM), but your repeater will lock up if you try to do Digital Fusion (C4FM). I recommend getting the firmware upgrade, then

Duane and Mike - Let us know if this fixes your 'no decode' problems.

After adjusting the audio levels, there's still no D-STAR audio being heard on my ID-31a. However, I do see the header information (Callsign, Name, Msg., etc) displayed on the ID-31a's LCD screen for

It appears that the wireless driver for the Pi3 is not included in the compass build. I am presuming that there are no conflicts between this driver and the udrc?? -Corky

The wireless driver for the wireless interface on the Pi3 is absolutely included in the compass version of the raspberrypi-kernel package. There are no conflicts. The PI3 WLAN interface uses the

If you are seeing text and are driving at the levels represented in the window capture I posted, then the next test is peak to peak voltage on pin 6. (1 V) you might also try different combinations

Hi John: Don’t you mean the hardware upgrade from 1.00M to the 1.10J. Most of the repeaters that are less than a year old would be a freebie except to ship the repeater to yaesu. Hope everyone

No D-STAR audio solved! Not sure how, (and I should have caught this sooner) but somehow DCS ended up being enabled on my ID-31a. This would certainly account for the header information appearing on

using dcs or continuous digital coded squelch system will work very nicely for the repeater in fm mode mike. I have tested this all here with my dr-1x and it works well. dcs

Thank you for the confirmation Ken! John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

Hi John. Here are my observations regarding DCS(& CTCSS) on DR-1x v1.00m firmware. Unit set to Fixed FM/ Fixed FM mode. -In order for the UDRC(D-STAR) to function, signalling must be set to CTCSS or

Hi mike make sure you have 2 channels programmed into your id-31a. 1 channel for use with fm with the proper pl or dpl decode set for the fm mode. 1 channel for use with the mode

Hi Ken, Thanks for the info, I'll be doing more testing when I'm home from work later today. 73 de Mike

oh by the way mike. also do not enable any digital dstar squelch code (also called dcode in the menu) or callsign squelch also you will not need it. it is normally used for

i meant to say that the dcode dstar (dstar digital squelch code) feature is NOT normally used. ken n1dot Virus-free. www.avast.com

Received my URDC in the mail this afternoon and began with a fresh compasslinux SD image. Figured out my previous permissions isues and got the wife going as well VNC. Placed the UDRC on the Pi and