https://pi-hole.net/faq/how-do-i-set-a-static-ip-address-in-raspbian-jessie-using-etcdhcpcd-conf/ -- John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

I gave up on having to deal with the two different methods of statically assigning IP addresses depending on if you're using 'Wheezy' or 'Jessie', and now enter a static IP address reservation in the

I am using an ID-51A. I can connect to reflector 30C and it shows that I am connected by looking at dstarrepeater and ircddbgateway. After I unkey I can see other callsigns key up but cannot see any

Did you look at alsamixer? (See image in message thread) What is in /var/log/opendv/dstarrepeater_1 (during startup) Do you hear modem tones on an FM receiver (no PL) when the repeater is

Illustrations showing the required UDRC dstarrepeater settings, which you may find useful if using the GUI version. There is also a slide for alsamixer showing the audio settings. Use this as your

I had Duane send me his configuration file. Somewhere along the way, his sound card transmit got switched to the sound chip on the Raspberry Pi, so when the PTT keyed the output modem tones were not

Thanks Mike. -- John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

I know this question has been presented before, but has anyone played around with trying to use the URDC with an external controller? Could the audio paths be switched in and out with relays that is

I know we are waiting on modification to the DStarrepeater software for the raspberry Pi to work with the UDRC for hotspots but I cannot help but tinker with what we have. I have managed to configure

Hi Rich, We have made the code changes and they are in testing. So far, so good. The main change is setting the PTT correctly on traffic going to the hotspot radio. Expect updated dstarrepeater /

I had my UDRC working beautifully with Direwolf and my FTM-100D. Both TX and RX of packet data worked without any issues. I was able to connect to the Kiss port with RMS Express on my Windows Desktop

I'm in meetings all day, so won't be able to go into depth. If you save the script to a file and look inside you will see DB levels for PCM, ADC, LO (PCM and LO control the level of transmit

Well I got it working again. Not sure how or why. But I did notice yesterday that I received an error message when the script to set the Alsa values was run, but not every time. I uninstalled direwolf

Newly updated and added packages. dstarrepeater dstarrepeaterd Includes support for simplex dstar nodes (hotspots). Use the Soundcard udrc and the UDRC controller configuration option 5 Settings

Hi John, I updated the repository, and I'm curious about the two dstartrepeater packages -both of which appear to be installed, and both are the same version/ dstarrepeater, & dstarreapeater-udev

It doesn't look like your update worked? The new packages should a June date. The -udev package is separate and automatically included.

I had only updated the repository, and hadn't updated/installed the actual packages yet. The update worked fine.

The dstarrepeater-udev package is pulled in because it’s a dependency of both dstarrepeater and dstarrepeaterd. It contains the udev rules to make sure that users other than root can access the

Understood. Thanks for the explanation. de Mike VE3MIC

After playing with the new DStarrpeater files this morning I went back to packet and again I was receiving errors from the sound mixer when trying to adjust values. this is the error I received when