Basil, Here 'tis. No joy after reboot. Jack

Correct Richard. You can determine which one your connected to by entering either command and see which one KEYS your radio. Mine was on the right DIN. Then you use correct pin number in your

Thanks Keith. If you follow the instructions to the letter you should have no problems. The size of the microSD card shouldn't matter as long as it's at least 16GB. /Basil n7nix Keith M. McDonald

Steve, N9VW <steve@...> writes: Are you starting from a BETA12 image or did you run prog_refresh.sh? The DRAWS card is not being seen so trying running: chk_conflict.sh and reboot Then

Thanks. Try rebooting & run showudrc.sh again and send it to me. I'm pretty sure this is the AudioSense-Pi driver problem. running chk_conflict.sh should fix that. That script is run from the

You have to reboot after you run chk_conflict.sh because it fixes a Linux driver load problem. I need to put that in the doc. ax25_start is failing because there is no driver for the DRAWS

I am wondering if the failures and errors are related to the increased demand on storage capacity of the SD card? I downloaded Beta 12 and used Etcher to flash the image to a Class 10 64 GB SD

Hi Basil, I have run through the instructions and loaded two different 16G cards. The initial setup and ax.25 scripts are failing. I went back to Beta 11 and it wall works as expected. 73 de Steve,

John, by left and right are you referring to the mini din connectors? Ka4ohm

Basil, One more self-explanatory file. Suggestions? KD4IZ Jack Spitznagel FM19oo

Basil, Hate it when I miss things. See the last line in the attached file. No DRAWS detected. WTF? It was working before I did the update. KD4IZ Jack Spitznagel FM19oo

Basil, Ran through the install twice. The first time by trying the long update/upgrade path in the documentation over BETA 9 which has been running ok on my early release hat. Did not work. I wound

thanks a lot basil, i'm going to run through it this evening. 73

Before you update your image, please capture any configuration changes you might have made like current alsamixer settings. Run alsa-show.sh & make a copy of result. Note a minimum microSD card size

Glad you got it operational Josh. I couldn't have done it without the help of John Hays here and Jordan Sherer who developed Js8Call. There are many flavors of the Icom 706's still out there. This is

Hi to all contributors! I just ordered a case and I would take the chance also to say a big THANK YOU! I appreciate a lot all the work you are doing and to spread a little bit the fun I have with

Bryan, First, thanks for the efforts that all at NW put in. Some seem to forget that besides the many hours you guys put in you have "real" jobs and "real" lives. Next, many Alpha, Beta or first run

I was wondering when they were coming with pitchforks and torches, Damn.. As an early adopter knowing that there is always a risk of changes and that's why we were offered a discount in the first

Anyone who has a board now has the SMA along the side with the mini DIN connectors. Future shipments have the new layout. The case is for all boards shipped to this point.

John I believe I have an early adopter DRAWS board (GPS SMA connector next to the six pin DIN connectors). Could you please post a picture of the new and early adopter DRAWS boards for