|
#draws Aluminum Case
#draws
Are any of the first run aluminum DRAWS available for purchase? I would like to get two rather than the acrylic version.
Are any of the first run aluminum DRAWS available for purchase? I would like to get two rather than the acrylic version.
|
By
Ed Bloom, KD9FRQ
·
#3176
·
|
|
Re: Icom 706MKIIG Setup
#icom
#ptt
great work Todd on figuring this out.
I was able to create the script and I can now transmit with the draws on my OG IC-706
Thanks for all the legwork.
Josh
KB6FJ
great work Todd on figuring this out.
I was able to create the script and I can now transmit with the draws on my OG IC-706
Thanks for all the legwork.
Josh
KB6FJ
|
By
Josh H. KB6FJ
·
#3175
·
|
|
Re: Switch Audio
The DRAWS™ HAT and built-in Raspberry Pi audio CODECS are separate.
Edit /boot/config.txt and uncomment (near the end)
dtparam=audio=on
Save and reboot.
This will activate the Raspberry Pi's
The DRAWS™ HAT and built-in Raspberry Pi audio CODECS are separate.
Edit /boot/config.txt and uncomment (near the end)
dtparam=audio=on
Save and reboot.
This will activate the Raspberry Pi's
|
By
John D Hays - K7VE
·
#3174
·
|
|
Switch Audio
While not doing amateur digital, is there a way to switch audio from the hat, to using hdmi port through the speaker on the tv that I am using? I have tried with the draws hat on and off the board.
While not doing amateur digital, is there a way to switch audio from the hat, to using hdmi port through the speaker on the tv that I am using? I have tried with the draws hat on and off the board.
|
By
Douglas
·
#3173
·
|
|
DRAWS™ Kit and Turnkey Available for Order
k7udr posted: "We have now opened orders for:DRAWS Kit $199.95For the Do-It-Your Selfer who wants to save money by doing the “Box Build” and SW Integration: DRAWS HAT GPS Antenna with LNA 2
k7udr posted: "We have now opened orders for:DRAWS Kit $199.95For the Do-It-Your Selfer who wants to save money by doing the “Box Build” and SW Integration: DRAWS HAT GPS Antenna with LNA 2
|
By
John D Hays - K7VE
·
#3172
·
|
|
#12vsupply #power Mobile power up/down
#12vsupply
#power
Anyone automatically powering up/down (if that's possible) based on the 12v input sensor? I'd like to have my pi sleep or power off at a configurable voltage so that it will never run the car battery
Anyone automatically powering up/down (if that's possible) based on the 12v input sensor? I'd like to have my pi sleep or power off at a configurable voltage so that it will never run the car battery
|
By
BJ
·
#3171
·
|
|
Re: partially deaf miniDin-6 sockets
#audio
👍👍👍👍
Thank you.
John D. Hays
Edmonds, WA
K7VE
👍👍👍👍
Thank you.
John D. Hays
Edmonds, WA
K7VE
|
By
John D Hays - K7VE
·
#3170
·
|
|
Re: HF Rig Recommendations
#hf
#draws
Awesome, glad it helped!
- Steve
Awesome, glad it helped!
- Steve
|
By
Steve McGrane <temporarilyoffline@...>
·
#3169
·
|
|
Re: HF Rig Recommendations
#hf
#draws
Hi Bjorn
Thanks for the encouragement.
I made up a cable for the KX2. I cut a mini-DIN -6 cable and a male to male 3.5 cable in half. I soldered them to form a mini-Din-6 on one end and two male
Hi Bjorn
Thanks for the encouragement.
I made up a cable for the KX2. I cut a mini-DIN -6 cable and a male to male 3.5 cable in half. I soldered them to form a mini-Din-6 on one end and two male
|
By
Rick
·
#3168
·
|
|
Re: partially deaf miniDin-6 sockets
#audio
Hi Bryan, thanks, I tried to erase that message. Idiot error on my end. I had AFIN and AFOUT reversed when I made the cable to the FT-2980. I guess it is karma for me complaining earlier about the
Hi Bryan, thanks, I tried to erase that message. Idiot error on my end. I had AFIN and AFOUT reversed when I made the cable to the FT-2980. I guess it is karma for me complaining earlier about the
|
By
David Lowry
·
#3167
·
|
|
Re: partially deaf miniDin-6 sockets
#audio
Hi David,
Sounds like a bad connector, but both?
Please take a picture of the bottom of the DRAWS board then return it to:
NW Digital Radio
RMA5920
245 Highlands Drive
Friday Harbor WA
Hi David,
Sounds like a bad connector, but both?
Please take a picture of the bottom of the DRAWS board then return it to:
NW Digital Radio
RMA5920
245 Highlands Drive
Friday Harbor WA
|
By
Bryan Hoyer
·
#3166
·
|
|
Re: HF Rig Recommendations
#hf
#draws
Half success. I have still the FT8900 connected to the left mini-DIN-6 female connector on the Draws board (udr0) and now also my kx3 connected to the right mini-DIN-6 female connector on the Draws
Half success. I have still the FT8900 connected to the left mini-DIN-6 female connector on the Draws board (udr0) and now also my kx3 connected to the right mini-DIN-6 female connector on the Draws
|
By
Bjorn Pehrson
·
#3165
·
|
|
Re: DRAWS + FT-891 + WSJT-X/FT8
Interesting that Mode:None worked! I'll have to try that and see what it is all about.
Here is my video on the subject: https://youtu.be/5lxvVD1-0lk
Interesting that Mode:None worked! I'll have to try that and see what it is all about.
Here is my video on the subject: https://youtu.be/5lxvVD1-0lk
|
By
Steve McGrane <temporarilyoffline@...>
·
#3164
·
|
|
DRAWS GPS & FT8 Video inside
Latest Video, Fresh off the presses:
https://youtu.be/5lxvVD1-0lk
Prev. Videos:
WiFi Config, Updates, SSH and VNC
https://www.youtube.com/watch?v=3cSuYcbkKv4
Intro and SD Card
Latest Video, Fresh off the presses:
https://youtu.be/5lxvVD1-0lk
Prev. Videos:
WiFi Config, Updates, SSH and VNC
https://www.youtube.com/watch?v=3cSuYcbkKv4
Intro and SD Card
|
By
Steve McGrane <temporarilyoffline@...>
·
#3163
·
|
|
RMSGW and LINBPQ
Setup a DRAWS as a RMSGW. It works nicely for WINLINK Digipeater Clients.
Is there any guidance to install LINBPQ to provide NODE, CHAT and BBS to use the existing RMSGW instance of
Setup a DRAWS as a RMSGW. It works nicely for WINLINK Digipeater Clients.
Is there any guidance to install LINBPQ to provide NODE, CHAT and BBS to use the existing RMSGW instance of
|
By
J P Watters <kc9kko@...>
·
#3162
·
|
|
Re: DRAWS + FT-891 + WSJT-X/FT8
Steve,
Here are my radio and audio settings
Tim / AG6RS
Steve,
Here are my radio and audio settings
Tim / AG6RS
|
By
Tim Sperry
·
#3161
·
|
|
Re: Xastir/gpsd Update
#draws
#gpsd
#config
#xastir
Until Basil has a chance to add the updated Xastir, a prog_update won't update your install.
The only path right now is to build from source.
--
John D. Hays
Edmonds, WA
K7VE
Until Basil has a chance to add the updated Xastir, a prog_update won't update your install.
The only path right now is to build from source.
--
John D. Hays
Edmonds, WA
K7VE
|
By
John D Hays - K7VE
·
#3160
·
|
|
Re: Xastir/gpsd Update
#draws
#gpsd
#config
#xastir
I attempted to use ~/n7nix/bin/prog_refresh.sh script to update programs.
FLDIGI builds and updates but XASTIR fails.
XASTIR -V is an invalid option (and XASTIR -v sets the debug
I attempted to use ~/n7nix/bin/prog_refresh.sh script to update programs.
FLDIGI builds and updates but XASTIR fails.
XASTIR -V is an invalid option (and XASTIR -v sets the debug
|
By
Edward Seeliger
·
#3159
·
|
|
Re: DRAWS + FT-891 + WSJT-X/FT8
Paul, I've sent the details for the FT891 off to Basil, but seeing Tim's response they might not be needed just yet.
Paul, I've sent the details for the FT891 off to Basil, but seeing Tim's response they might not be needed just yet.
|
By
Steve McGrane <temporarilyoffline@...>
·
#3158
·
|
|
Re: DRAWS + FT-891 + WSJT-X/FT8
Steve,
I was able to capture both the radio settings and the audio settings using the print/screen button on the keyboard then going to the captured screen shots, renaming them and putting them in the
Steve,
I was able to capture both the radio settings and the audio settings using the print/screen button on the keyboard then going to the captured screen shots, renaming them and putting them in the
|
By
Tim Sperry
·
#3157
·
|