|
Re: DRAWS™ Manager Demo
#drawsmanager
Put it in Chrome on the pi. In My case 192.168.0.79:8080. You need to get you IP address for you pi, then add :8080
Put it in Chrome on the pi. In My case 192.168.0.79:8080. You need to get you IP address for you pi, then add :8080
|
By
Fred Hirsch <Hirschfh@...>
·
#3015
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
John,
Don't know how to capture dialog so I am picking out the error when attempting an update from DRAWS Manager:
fatal: "unable to access https://github.com/nwdigitalradio/draws-manager.git/":Could
John,
Don't know how to capture dialog so I am picking out the error when attempting an update from DRAWS Manager:
fatal: "unable to access https://github.com/nwdigitalradio/draws-manager.git/":Could
|
By
Fred Hirsch <Hirschfh@...>
·
#3014
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
Im having trouble understanding how to get to the manager. Do i put the ip address in my browser on my PC or from the Pi?
Im having trouble understanding how to get to the manager. Do i put the ip address in my browser on my PC or from the Pi?
|
By
Justin Clark (KJ7JC)
·
#3013
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
Yes the raspberry pi.
By
John D Hays - K7VE
·
#3012
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
I will get you error messages tomorrow. In regard to you question the Raspberry is connect to the internet,
so I was assuming the DRAWS was also.
Fred
I will get you error messages tomorrow. In regard to you question the Raspberry is connect to the internet,
so I was assuming the DRAWS was also.
Fred
|
By
Fred Hirsch <Hirschfh@...>
·
#3011
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
I got the Draws Hat this afternoon. Loaded image, got Direwolf running.
I have an old Icom 28h I have gotten an old adapter using the KPC 3 DB 9 plug plus a speaker plug for audio.
Using a USB and
I got the Draws Hat this afternoon. Loaded image, got Direwolf running.
I have an old Icom 28h I have gotten an old adapter using the KPC 3 DB 9 plug plus a speaker plug for audio.
Using a USB and
|
By
Don Poaps
·
#3010
·
|
|
Re: People receiving boards
#draws-manager
#setup
#draws
Thanks guys. I found fldigi under internet. Rick Ka4ohm
Thanks guys. I found fldigi under internet. Rick Ka4ohm
|
By
Richard Waller <rewaller@...>
·
#3009
·
|
|
Re: xastir not passing GPS data via GPSD
#draws
#gpsd
#config
#xastir
I've posted over a xastir. I've also deleted and installed from git a fresh version of xastir with the same results. It's just weird that I had it working in beta 9 and now it won't work. I might just
I've posted over a xastir. I've also deleted and installed from git a fresh version of xastir with the same results. It's just weird that I had it working in beta 9 and now it won't work. I might just
|
By
Josh H. KB6FJ
·
#3008
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
Is your DRAWS™ connected to the Internet?
Always include error messages.
--
John D. Hays
Edmonds, WA
K7VE
Is your DRAWS™ connected to the Internet?
Always include error messages.
--
John D. Hays
Edmonds, WA
K7VE
|
By
John D Hays - K7VE
·
#3007
·
|
|
Re: DRAWS™ Manager Demo
#drawsmanager
I am having two problems with the Manager. (1) It will not save the audio settings. I save them but they are lost on the restart.
(2) When I try to do an update from the Manager it errors out
I am having two problems with the Manager. (1) It will not save the audio settings. I save them but they are lost on the restart.
(2) When I try to do an update from the Manager it errors out
|
By
Fred Hirsch <Hirschfh@...>
·
#3006
·
|
|
Re: Basic Direwolf question
#draws
#direwolf
#ax25
I haven't had a chance to really dig in to how things are set up yet, but it sounds like the Direwolf service may not be running - so you may need to start it, or might even need to set up
I haven't had a chance to really dig in to how things are set up yet, but it sounds like the Direwolf service may not be running - so you may need to start it, or might even need to set up
|
By
Gary KC3PO
·
#3005
·
|
|
Re: Basic Direwolf question
#draws
#direwolf
#ax25
There are two approaches:
1. Use direwolf simply as a KISS/AGW/NETWORK attached TNC and let the applications generate the position data (eg. YAAC)
2. Make sure gpsd is configured in direwolf.conf --
There are two approaches:
1. Use direwolf simply as a KISS/AGW/NETWORK attached TNC and let the applications generate the position data (eg. YAAC)
2. Make sure gpsd is configured in direwolf.conf --
|
By
John D Hays - K7VE
·
#3004
·
|
|
Basic Direwolf question
#draws
#direwolf
#ax25
I know this is more of a software question but I'm trying to figure out how to get direwolf to beacon APRS with position. I enabled the lines in direwolf.conf but it doesn't seem to TX and I don't see
I know this is more of a software question but I'm trying to figure out how to get direwolf to beacon APRS with position. I enabled the lines in direwolf.conf but it doesn't seem to TX and I don't see
|
By
Dave N2OA
·
#3003
·
|
|
Re: People receiving boards
#draws-manager
#setup
#draws
Bob,
Thanks for the explanation. Maybe a pointer or a visual added to the documentation will prevent the confusion of folks new to the setup.
I have had some “Ham” programs automagically
Bob,
Thanks for the explanation. Maybe a pointer or a visual added to the documentation will prevent the confusion of folks new to the setup.
I have had some “Ham” programs automagically
|
By
Jack Spitznagel
·
#3002
·
|
|
Re: People receiving boards
#draws-manager
#setup
#draws
Basil,
Sorry for unjustly pointing a finger! Please accept my apology and particularly my thanks for all that you and the rest of the NWD team have done to bring DRAWS to life.
I have been
Basil,
Sorry for unjustly pointing a finger! Please accept my apology and particularly my thanks for all that you and the rest of the NWD team have done to bring DRAWS to life.
I have been
|
By
Jack Spitznagel
·
#3001
·
|
|
Re: People receiving boards
#draws-manager
#setup
#draws
Thanks for the info. I will follow your suggestions. Rick.
Thanks for the info. I will follow your suggestions. Rick.
|
By
Richard Waller <rewaller@...>
·
#3000
·
|
|
Re: xastir not passing GPS data via GPSD
#draws
#gpsd
#config
#xastir
I would recommend sending Xastir bug reports to https://github.com/Xastir/Xastir/issues
I would recommend sending Xastir bug reports to https://github.com/Xastir/Xastir/issues
|
By
John D Hays - K7VE
·
#2999
·
|
|
Re: xastir not passing GPS data via GPSD
#draws
#gpsd
#config
#xastir
Just wanted to share I'm in the exact same situation. Only exception is my install of Xastir has never seen GPS data. I've applied two updates from B9 to current. Gpsmon shows valid data and YAAC
Just wanted to share I'm in the exact same situation. Only exception is my install of Xastir has never seen GPS data. I've applied two updates from B9 to current. Gpsmon shows valid data and YAAC
|
By
Kevin K. - N7KJK
·
#2998
·
|
|
xastir not passing GPS data via GPSD
#draws
#gpsd
#config
#xastir
I'm having a heck of a time trying to get GPS data to populate in XASTIR. I can see vaild GPS data coming in via cgps, gpsmon and xgps. GPSD shows active and when I add the port to XASTIR It's coming
I'm having a heck of a time trying to get GPS data to populate in XASTIR. I can see vaild GPS data coming in via cgps, gpsmon and xgps. GPSD shows active and when I add the port to XASTIR It's coming
|
By
Josh H. KB6FJ
·
#2997
·
|
|
Re: People receiving boards
#draws-manager
#setup
#draws
This is controlled by the .desktop files included in the source distribution of fldigi and friends in the "data" directory and installed into /usr/local/share/applications. In these files the menu
This is controlled by the .desktop files included in the source distribution of fldigi and friends in the "data" directory and installed into /usr/local/share/applications. In these files the menu
|
By
Bob NW8L
·
#2996
·
|