Yep. I confirm that's also what I see. This is easily fixed with what I previously posted so will not be releasing a new image for that. The xs_install.sh script already fixes this problem. sudo

Did not exactly follow that but did "some". My error was "xastir: error while loading shared libraries: libgeotiff.so.2: cannot open shared object file: No such file or directory" so I'll back up

Hi Jack, The following is what I did from a clean install of image15 to get Xastir to run. I tried to run Xastir from just a clean install & I received this error: xastir: error while loading shared

I have a 2nd DRAWS unit I use for porta/mobile activities and an SD card that already has the “virgin” image on it. I will give it a try this afternoon and record the results. More to

Thanks Jack. If you can't get xastir to start from clicking the desktop icon then open a console and run xastir from the console. Doing this will display any problems that may be occurring that you

Basil, All, Did I miss a posting about this? Had trouble getting XASTIR to load following the install and configure checklist/instructions in the group Wiki. I finally got a chance (well, was

Just by the way, my board is the one with the sma the same end as the SD card.

Thanks John I have reset the radio, and have used DM to set the ALSA parameters. pi@DRAWS-VK4GC:~ $ alsa-show.sh ===== ALSA Controls for Radio Transmit ===== LO Driver Gain L:[-6.00dB]

Another suggestion is to do a hard reset on the FT-817 itself to make sure none of the internal settings for audio / accessory port have been changed. -- John D. Hays Kingston, WA K7VE

There is a web based tool to setup. https://www.youtube.com/watch?v=v5C3cWVVz_A-- John D. Hays Kingston, WA K7VE

read as UNMODULATED Carrier

Thanks Barry Running alsashow pi@DRAWS-VK4GC:~ $ alsa-show.sh ===== ALSA Controls for Radio Transmit ===== LO Driver Gain L:[-6.00dB] R:[-6.00dB] PCM L:[-16.50dB] R:[-16.50dB] DAC Playback

Look at the link below. It is what I used to get an FT-817 to work with FLdigi. https://github.com/nwdigitalradio/n7nix/blob/master/docs/RADIO_APP_NOTES.md Since you are using some HF digital mode

J P, Sorry for the lag. I am jealous that you are working on this as I'm trying to complete some other things at the moment. I really want to get URONODE & LinFBB BBS up on my packet infrastructure

Back Again after a delay. Ran FT817 .sh as suggested Still the same 2 radios - ft817 and uBITXv6 (uBITX thinks it is a FT817 for WSJTX purposes) Both radios work fine with another Pi USB audio RXTX

Greetings Basil N7NIX, If things go right tomorrow, I might try installing URONODE on the image NW15. I really would like to figure out how to run the nodesearch plugin. Any advice would be

Hello- Thanks for your private emails. The package is sold. 73 Clifford

None of them, there's a separate port on the DRAWS that gives you a TTL-level UART serial port. THAT, is what you want for doing CAT. Or you provide a separate cable hooked up via USB. I'll

No Red LED is unhappy power supply/ Measure the 5V Rail, I have seen issues with Pi4. Bryan K7UDR

I would answer if I had one, John. I have my Draws hat, but I haven't tried putting it on a Pi yet. I've been waiting for the bugs to get squished first. Otherwise, I'd suggest that maybe responses