Another suggestion is to do a hard reset on the FT-817 itself to make sure none of the internal settings for audio / accessory port have been changed. -- John D. Hays Kingston, WA K7VE

There is a web based tool to setup. https://www.youtube.com/watch?v=v5C3cWVVz_A-- John D. Hays Kingston, WA K7VE

read as UNMODULATED Carrier

Thanks Barry Running alsashow pi@DRAWS-VK4GC:~ $ alsa-show.sh ===== ALSA Controls for Radio Transmit ===== LO Driver Gain L:[-6.00dB] R:[-6.00dB] PCM L:[-16.50dB] R:[-16.50dB] DAC Playback

Look at the link below. It is what I used to get an FT-817 to work with FLdigi. https://github.com/nwdigitalradio/n7nix/blob/master/docs/RADIO_APP_NOTES.md Since you are using some HF digital mode

J P, Sorry for the lag. I am jealous that you are working on this as I'm trying to complete some other things at the moment. I really want to get URONODE & LinFBB BBS up on my packet infrastructure

Back Again after a delay. Ran FT817 .sh as suggested Still the same 2 radios - ft817 and uBITXv6 (uBITX thinks it is a FT817 for WSJTX purposes) Both radios work fine with another Pi USB audio RXTX

Greetings Basil N7NIX, If things go right tomorrow, I might try installing URONODE on the image NW15. I really would like to figure out how to run the nodesearch plugin. Any advice would be

Hello- Thanks for your private emails. The package is sold. 73 Clifford

None of them, there's a separate port on the DRAWS that gives you a TTL-level UART serial port. THAT, is what you want for doing CAT. Or you provide a separate cable hooked up via USB. I'll

No Red LED is unhappy power supply/ Measure the 5V Rail, I have seen issues with Pi4. Bryan K7UDR

I would answer if I had one, John. I have my Draws hat, but I haven't tried putting it on a Pi yet. I've been waiting for the bugs to get squished first. Otherwise, I'd suggest that maybe responses

I guess i am on my own then..... -- MY GMAIL desktop Email accoount, JF McRae, VK5PO/VK5SIX

Hi guys. I have connected a power supply to the draws hat, but when I switch the supply on, the Pi does not 'start'. the cooling fans are working, I see the GREEN LED on the Pi illuminated

The draws driver is part of mainline Linux IF you are using a current kernel. See "Make your own Raspberry Pi image"

I am finally having some success with my Pi 4b I ended up not using the NWDIG .img So, having gotten fldigi working ok, Including CAT ctrl I now need to ONLY INSTALL draws lib components to utilise

I clicked on the link and that is where it is taking me to, the folder in screenshot. -- Eric M. Gildersleeve ~ KD7CAO Google Voice: 940-784-3029

It looks like you went to the 'main' group for nw-digital-radio -- this file is in the files section of the udrc subgroup. If your browser is logged into groups.io, you should just be able to click

You are looking at the wrong group files location. You are in group main the files are in group udrc. If you just click on the link John gave

There is no CAT control on the DRAWS hat. The mini DINS are for the input/output of digital audio. You can attach two radios hence two connectors. CAT is done by a USB to CAT cable for your radio. You