I've seen it crawl under Linux too. I was at work, so 50Mbps microwave link for Internet. Workstation and border router are both Linux (Gentoo on the workstation, Ubuntu on the border router), an

Very nice. I am trying to power my Pi3/DRAWS today for the first time. This case/fan/PoE solution is really nice. Clifford - KK6QMS

Jim, An AX.25 interface is most likely not running Look at this document https://github.com/nwdigitalradio/n7nix/blob/master/rmsgw/README.md#testing-the-rms-gateway run ax25-status to confirm it's

I received a text from one of our locals that my RMS stn hangs when he tries to connect to it. When I go to the logs, I get Nov 1 12:06:01 localhost rmsgw_aci[6817]: K5KTF-10 - Linux RMS Gateway

If you are addressing this post to Alan Bush, I live in the same county as Alan & will be going over to his QTH in the coming weeks to assist in his install. When we do the Linux RMS Gateway install

Have you made any progress on this project? I just got my DRAWS board in hand on a pi 3B+, and am about to dig in on this very near identical setup you are attempting. If you have made progress, i

Thanks, I had in mind that DRAWS can just handle up to 12 volts. But in this case it makes a lot of hardware installation things a lot easier. Once again thanks for your help

The.Pi USB power input is a nominal 5.1 VDC. Typical 'wall wart' USB supplies may have voltage drop who h in turn manifests in inconsistent operation of the Pi. This, and a single station power

I believe you want make sure you use the power input on the DRAWS and not the Pi itself. Gayland KG7GCF

That will be just fine. Input voltage range is 9-15 VDC

Hi group. This might be a stupid question. But since I wouldn’t like to grill my D.R.A.W.S. I will post it anyway: I saw a video where somebody presented D.R.A.W.S. In this presentation he

There is code in DRAWS™ Manager to monitor temperature, voltages, etc. See https://github.com/nwdigitalradio/draws-manager/blob/master/webapp/io.js#L58 -- John D. Hays Kingston, WA K7VE

This is really nice. I hope to make use of it when I get my second system setup for APRS... One thought if you're looking for useful information.. If the programming environment has access to any

Awesome efforr!

and... here is the manual: https://elafargue.github.io/wizkers-doc/ In particular, look up the "Developer/Building" section if you want to build it! That project is a bit unloved these days for

It doesn't use hamlib so far - it does far more than hamlib can do for Elecraft or Kenwoodradios, but at the expense of wider rig support. Source is at https://GitHub.com/wizkers/wizkers.git . I need

Hello Edouard, Just wondering if your program uses or can use hamlib, this would greatly expand the number of radios your program can use. Thank you and 73, Ruben WA2NBL

Basil has limited email access for a few days, maybe ping this when he is back.

I am thinking of creating a mobile RMS gateway for temporary use on ARES & Search and Rescue missions. I have a rPi with a UDRC II in my vehicle. It is configured to run APRS using a radio on the DB15

Very nice. A git repository would be very welcome. -- John D. Hays Kingston, WA K7VE