I think that your ALSA audio routing is incorrect. If you route through ALSA IN1 then you are using DISCOUT or discriminator audio. If you route through ALSA IN2 then you are using AFOUT

Hello Everyone, I have updated my case and it is Thing 3897403 https://www.thingiverse.com/thing:3897403. It uses a Raspberry Pi Poe Hat between the Raspberry Pi and the Draws Hat. This brings a

Hi Basil, thanks for the information. I have some additional responses below. 73, NX2I John I am not sure what "released " means; nwdr14.imgf is what I get when I click on "current image" on the NWD

New image is not released yet, so not supported yet. Sounds cool. I can't comment on that unless I see the actual showudrc.sh console output. But please wait until I announce the release. Should be

I am attempting to update my aprs system to the current buster-based image nwdr14.img. the old image was beta 10 I believe. The system uses a UDRC-II HAT. I am looking for a very plain end point; an

I removed pin 6 from both ends of the cable and it didn't seem to help in my case in my ft-891. In fact it was rather a step backwards as I no longer was receiving signals.

I have the same trouble, I have the same radio. I have not tried for several months now. It did work on vhf and aprs with the supplied cables. I live in a trailer and just dont want to take a chance

I have been hunting audio out here with a FT-847. The receive works fine. Should I remove pin 6? Can someone explain why. I am using cables that were supplied with the Draws.

I concur with Mitch. I just downloaded the zipped image and it took 10min 18s at 4.73MB/s I used my Linux workstation. It does depend on how many other connections are in progress. time wget

k7udr posted: "Working thru delays in moving product in/out of China. Should have final prototypes this month. Hopefully production in November.Thanks for your patience,Bryan

Thanks for responding. the download finally finished after 17.5 hours. I guess I will have to make a Pi Download machine for any future updates I need.

I saw something similar when downloading it yesterday. On Win10 it was abysmally slow. With the same connection on Linux it was it's normally speedy self. The reader is left to his own

Thanks for the fast reply John!! No, i had got the image on the 27th. I will etch this one here and see how it works. Thank you

Did you get your new image from http://nwdig.net/downloads -- John D. Hays Kingston, WA K7VE

I haven't used my draws in about 5 months. I started it up and did an update and then upgrade. Rebooted, now it won't reboot. I etched a new image and still get the same problem. I'm no expert on

Hello, Just received my board and when trying to download the image from:Index of /downloads/ current_image.zip I see minimal download speed and varying between 17 hours to 2 days left. I

Hi Guys, I spent quite a bit of time on this because I, like Jonathan, have first run Draws hats which also require the dtoverlay= line. I found the best place to put the new lines are the first

f6bvp <f6bvp@...> writes: You are not wrong. The current version of Raspbian Buster has a kernel with the required driver and will work fine with udrc/udrc II/DRAWS hats. You had some other

Hi, I finally installed last image nw14 and DRAWS driver is ok and aplay -l listed the device is present. **** Liste des Périphériques Matériels PLAYBACK **** carte 0: ALSA [bcm2835 ALSA],

after the 1st i'll take it i'm in 95240...k6rys k94536@... -- Those who risk nothing—do nothing, achieve nothing, become