Fabien, You probably have one of the recall units with the cap problem. Return it for rework or refund, your choice. Thanks, Bryan K7UDR

Hi Mitch, It was buried in my office/house move. You no doubt have one of the units with the cap/TX Audio problem. I will fix and ship your unit tomorrow. I’d like to hear more about your potential

Some communication please. It was sent many moons ago.

Hello, I made a mistake, this is not made for me, I can't get anything to work with it, it's not made for me so I'm selling it. 120€ with shipping. Just let me know if you're interested.

Hi Basil, I would like to try new RPi image.as you suggested. Where can I download it from ? Bernard

I've always had great results with Rufus. Cowan N5QDH

Rufus works very well on windows 10 to create bootable image on the SD card. https://rufus.ie/ Cowan N5QDH

Later on today look for a new RPi image that should fix your problem. However adding those 3 lines to the bottom of the latest Raspbian images should work. I don't have enough visibility into your

I have done multiple Etcher images lately on a Win10 machine that is at level 1809 IIRC. Maybe it's something in 1903. I do not allow Defender or any Firewalls to be running as it is largely

I use Win32DiskImager on Windows 10, works just fine. August KG7BZ

The problem is an incompatibility between Etcher and Windows 10. Reference to the Etcher forum revealed that a number of others had suffered the same problem (not in relation to Draws). I

Adding lsmod dump could help ?

As suggested I moved driver lines to [all] section. However this did not help. I performed a RaspBerry Pi firmware + kernel update using rpi-update upgrading to kernel is 4.19.75-v7+ Interestingly

The problem is Anna's driver patches for the tlv320aic sound codec didn't ALL make it into the Linux mainline kernel when Raspbian first released Buster. There have been 3 or more kernel updates in

Possibly - will try it on another machine As the error > message indicates, the Etcher team is the place to get support on Yes, but I feel that it is not a problem with Etcher. I have just

Either 16 or 32 gb With all combinations using Etcher, I got the same error message I sent to the forum. When I used Win32 diskimager I got a similar indication that the operation had

That is not what I have found in practice. I created a clean sd card from the official image for buster and to get the Draws Hat to be recognised I had to add in the dtoverlay= line When I did

What size of SD Card are you using? Describe in more detail " All with the same result" Did you follow the instructions from this

This appears to be a problem on your Windows box. As the error message indicates, the Etcher team is the place to get support on Etcher. BTW, modern versions of Etcher allow you to simply point it at

I am trying to write the image to an SD card on a Win10 machine. I have downloaded the current zip file, unpacked it and tried writing it with Etcher; Result: I have tried different SD cards and