Please cut & paste the console output of: cd cd n7nix/bin ./udrcver.sh Thanks, /Basil Frank Ivan via Groups.Io <k0fei@...> writes:

Drivers only look at ProductID which is 4 for DRAWS

Hi Bryan, So what is the verdict on the strange product_ver? Can you send me a program to change it to something the drivers will be happy with? It would seem this card has not been shipped yet

Yes it's alive or at least I read all the posts. The driver for the DRAWS hat, specifically the TI TLV320aic3204 codec driver and the overlays for the UDRC/DRAWS hats are now in the main line Linux

Hi, Not sure this list is still alive. Due to issues with partially broken libraries in Compass image I decided to burn Buster distro on a RPi 3B with DRAWS HAT. The system is doing well but DRAWS

Thanks Bryan, I understand and my board is an affected one. While I’m not far from you, I am across the border so am a little reluctant to ship it. I may jump across the border and ship it from

We are just pulling the caps.

Ditto. Gayland KG7GCF

Are you guys just removing the bad caps like we would, or are you replacing them with the correct ones? I can stand to be without my board for that long, so sending it back sounds like a good option

2 days here

If we send our boards back for repair, what's the likely turnaround time? FWIW, I'm just a couple hours south in Seattle.

The issue with large gain settings is you drive the DAC into clipping, which won’t damage anything but the waveform will be distorted. I’ll do some tests in the lab tomorrow and post

I share Jim's question and appreciate your response! However, it still leaves me reluctant to make any alterations, as everything (including 1200 Baud Packet) works perfectly. By everything, of

Hi Jim, First off, if the GPS antenna connector is on the same side as the Mini DIN-6 Connectors your board is not affected. Many low bandwidth HF Programs may work but you will need to raise the

Apologies if this is a silly question, but how will the bug manifest itself? What applications would be affected and in what way are they affected. I haven’t pulled my board out of it’s case to

Gee Too bad you couldn't keep your product in the USA. MAGA

Thanks Bryan! In any case, the rework was useful - default alsamixer settings that are shipped with the n7nix repository now work out of the box... Ed

The output of the DAC is clean so the filter is unnecessary from that standpoint. There may be some value from an RFI standpoint but you would be better off with a Ferrite on the Radio Cable.

Bryan, I'd be plenty happy with 2 of the original unmodified cases if you happen to have any left. 73 de Steve, N9VW

The output of the DAC is clean so there is no benefit from that standpoint. There may be some value in reducing RFI from the radio but I can’t prove that.