Please don't take this wrong but have you hooked up an antenna to the draw hat gps connector?

I just received my DRAWS and at this point in time, I am only interested in getting the GPS working. (I'm developing a new ThumbDV app for D-Star Routing and linking and want to use the GPS to update

Has anyone setup PAT via DRAWS??? I have not seen this but admit I may have missed it. 73s, Ed, KD9FRQ

thanks! I'll double check and see what I'm doing wrong that it's not loading the driver.

Do we need to remove pin 6 for FT-891s?

The current (Buster) Raspbian has the driver built in. You don't need the DKMS for it.

I've been looking around the site and I see mention of a udrc-dkms (I'm assuming thats the audio driver file for the udrc) my question is there a repository somewhere that I could add to, say,

I was not upset about your responses I did every thing you said it was the lack of response from the office, and I think maybe they should offer to test some of the unit people cant get the unit to

Please send the DRAWS to me, if you don't want to send it back to NWDR. I'll give it a go since they did issue you the refund. Ed, KD9FRQ

I think, if you go back and review, you will see that you have had quite a few responses over the last several days, trying to help you diagnose the problem. Bryan processed the promised refund

Refund Issued Thanks, Bryan K7UDR

Hi Brian, It reports 0x0204. udrcver.sh shows: Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0204 UUID:

still no return contact from them. Its like when you have a problem with there card they forget you. ill take it to pay pal Monday before its to late Rob k6jus

To see what version of DRAWS you have: $ cat /proc/device-tree/hat/product_ver 0xAAFF AA is Assembly Revision FF is Fab Rev Currently Shipping 0x0106 Bryan K7UDR

Hi Edd, Just glad its working. I must have a really really early card. Hey - its a hobby and if you are not having fun then you are doing it wrong :-) 73 - Frank - K0FEI

Thanks Ed, I can't wait for an aarch64 system. I think it will really allow the Pi4 to show what its made of - especially with 2 or 4 gig. 73 - Frank - K0FEI

Michael, There are two possible choices for radio receive data with ALSA settings for each. There is not a lot of description on the ACC port for your radio so I'm going to assume AF_OUT is your

DRAWS™ Manager has links to many application support groups. For fldigi audio adjustment, check this page http://www.w1hkj.com/FldigiHelp/audio_adjust_page.html -- John D. Hays Kingston, WA K7VE

The NW Digital Radio team will be attending the Digital Summer Gathering this weekend. Email service at the camp is very limited. Requests for support, either technical or sales, will likely not be

Hi Michael, If you are not familiar with all of the workings of CODEC chip, it is best not to use alsamixer or similar tools to configure settings. The DRAWS™ Manager is designed to control the