Try measuring your deviation. https://www.febo.com/packet/layer-one/transmit.html You can send a tone using the measure_deviate.sh script found here: n7nix/deviation Use John's draws-manager web app

Need to see the console output from the wl2kax25 command. Not sure what you mean by "I've tested both serial ports". Which mDin6 connector are you using left or right? Updating paclink-unix will not

And now about 25% of the time I'm seeing Connected Child process calling wl2kexchange() Porposal code C type E. mid.... Yada yada.. The after about a minute a time out. So This now might just be

succeeded in updating from 0.7 to 0.8. the w2ktelnet command completed without errors and sent my gmail account three emails successfully via the PI's Internet connection. Attempts to use the radio

I changed my password in WinLink a couple times and tested with WinLink on my Windows PC. I set the password with all lower case characters because of the nature of the reported issue. Tested actual

There was a change make to paclink-unix source after Beta 13 was posted that fixed a case bug in the Winlink password. The file that changed was wl2k.c. Verify that your password is correct including

Thanks Basil and JP.

Hello, I'm running a fresh setup of Beta 13.. All the configuration scripts seem to have worked. I am using a dual band Yaesu FT-7800. I've successfully connected with wl2kax25 command to a gateway

I have regularly used 64gb SD cards. A word of caution, when loading an image that resizes the partition to the full size of the physical media for the first time, it TAKES a while and the booting

I've purchased & successfully booted Raspbian with 64 GiB & 128 GiB SD cards (Samsung EVO select). I believe the limitation is the Ext4 file format so 1 exbibyte (EiB). The largest micro SD card I've

That's a Raspbian/Raspberry Pi question. Whatever the max is for Raspbian/Raspberry Pi, will be the same for DRAWS™ / UDRC. The NOOBS image is not recommended. -- John D. Hays Kingston, WA K7VE

Is there a maximum SD card size for the image? I'm thinking of using a 64GB card. I know there is a 32GB limit for booting the Rasp. NOOBS image. Thanks

1B, 2GB, or 4GB? Interesting article.. https://www.androidcentral.com/raspberry-pi-4-how-much-ram-do-you-need-1gb-2gb-or-4gb?amp

I've found that I need to run the `setalsa-ft817.sh` script that was included in the ~/bin directory, after that, I opened the DRAWS Manager and changed the Input from Receiver Signal Source to

Matt, Also make sure your width is set to 3000Hz I notice on your radio it says LAP on the screen, upper left Do you have an amp connected? Maybe try the radio without a tuner or amp connected. Tim /

Is that written somewhere? I recall reading an April thread about beta 10 that said otherwise so what should I reference to keep up?

Forgot to include my DRAWS manager screenshot! Cheers, Matt - N7ROO

Thanks for the response Tim. I tried resetting my radio and also reflashed the DRAWS image. I've confirmed that I have the same menu settings as you, and that I'm using the left channel. I've included

What is the mode of your 817 while TX? I think it should be "DIG", otherwise it might not use sound input from the data port on back. You can set this up from WSJT-X by choosing USB-D (can't remember

Ken, did you look at Draws manager? That has output adjustments . Also the power slider on the right of the wsjt-x screen can be adjusted. Rick. Ka4ohm