Date   

Re: [New post] DRAWS™ Shipping Schedule

Tim Huffaker
 

Thank you for posting. Can you tell me how you can see where you are in the back order?  It wold be helpful to know. 


[New post] DRAWS™ Shipping Schedule

 


k7udr posted: "First units arrived yesterday. After programming, test and packaging we'll begin shipping backorders. This batch has completely sold out. The next batch is already scheduled for late April, by which time cases should be available as well."

New post on NW Digital Radio

DRAWS Shipping Schedule

by k7udr

First units arrived yesterday. After programming, test and packaging we'll begin shipping backorders.

This batch has completely sold out. The next batch is already scheduled for late April, by which time cases should be available as well.

k7udr | March 13, 2019 at 9:55 am | Categories: DRAWS, Uncategorized | URL: https://wp.me/p2mAAP-1AI


Trouble clicking? Copy and paste this URL into your browser:
http://nwdigitalradio.com/draws-shipping-schedule/




John D. Hays
Director

  


How do I change the AGW from Channel 0 to Channel 1 #udrc-ii #direwolf

TG9AOR
 

Hello all. I am using APRSISCE/32 and whenever I want to send a message, either using KISS or AGW connections, direwolf sends it via channel 0.

I do not have a radio connected to and do not plan to use the HD-15 connector. How do I configure direwolf so that all messages go out via the DIN6 connector?


Thanks.

TG9AOR


Re: UDRC2 and DR1X

Johnny
 

Will do. Thanks



On Mar 8, 2019, at 9:20 AM, John D Hays - K7VE <john@...> wrote:

I haven't tried it, but of follow the wiki for setup I think it should - otherwise just use the compass image. 

On Fri, Mar 8, 2019, 05:13 Johnny <w5pfr@...> wrote:
If I try the draws download, would it work for the DR1X setup, as far as setting up the pins and audio and etc? 
Thanks in advance


On Mar 7, 2019, at 8:54 PM, John D Hays - K7VE <john@...> wrote:


Or if you wanted to try installing on the draws beta, it is found at http://images.nwdigitalradio.com/downloads/ 

In both cases you will need to install the ircddbgateway and dstarrepeater packages.  (see wiki for instructions https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-Setup-for-the-Yaesu-DR-1X-Repeater)


On Thu, Mar 7, 2019 at 5:47 PM Johnny <w5pfr@...> wrote:
I need to download a fresh image for my UDRC2 and DR1X repeater. Can someone point me to where I can download a fresh image? My original image doesnt want to work right. Cant even SSH in to it. Keeps telling me, Connection Refused!!
Thanks in advance



--


John D. Hays
Director

  


Re: UDRC2 and DR1X

 

I haven't tried it, but of follow the wiki for setup I think it should - otherwise just use the compass image. 


On Fri, Mar 8, 2019, 05:13 Johnny <w5pfr@...> wrote:
If I try the draws download, would it work for the DR1X setup, as far as setting up the pins and audio and etc? 
Thanks in advance


On Mar 7, 2019, at 8:54 PM, John D Hays - K7VE <john@...> wrote:


Or if you wanted to try installing on the draws beta, it is found at http://images.nwdigitalradio.com/downloads/ 

In both cases you will need to install the ircddbgateway and dstarrepeater packages.  (see wiki for instructions https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-Setup-for-the-Yaesu-DR-1X-Repeater)


On Thu, Mar 7, 2019 at 5:47 PM Johnny <w5pfr@...> wrote:
I need to download a fresh image for my UDRC2 and DR1X repeater. Can someone point me to where I can download a fresh image? My original image doesnt want to work right. Cant even SSH in to it. Keeps telling me, Connection Refused!!
Thanks in advance



--


John D. Hays
Director

  


Re: UDRC2 and DR1X

Johnny
 

If I try the draws download, would it work for the DR1X setup, as far as setting up the pins and audio and etc? 
Thanks in advance


On Mar 7, 2019, at 8:54 PM, John D Hays - K7VE <john@...> wrote:


Or if you wanted to try installing on the draws beta, it is found at http://images.nwdigitalradio.com/downloads/ 

In both cases you will need to install the ircddbgateway and dstarrepeater packages.  (see wiki for instructions https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-Setup-for-the-Yaesu-DR-1X-Repeater)


On Thu, Mar 7, 2019 at 5:47 PM Johnny <w5pfr@...> wrote:
I need to download a fresh image for my UDRC2 and DR1X repeater. Can someone point me to where I can download a fresh image? My original image doesnt want to work right. Cant even SSH in to it. Keeps telling me, Connection Refused!!
Thanks in advance



--


John D. Hays
Director

  


Re: UDRC2 and DR1X

 


Or if you wanted to try installing on the draws beta, it is found at http://images.nwdigitalradio.com/downloads/ 

In both cases you will need to install the ircddbgateway and dstarrepeater packages.  (see wiki for instructions https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-Setup-for-the-Yaesu-DR-1X-Repeater)


On Thu, Mar 7, 2019 at 5:47 PM Johnny <w5pfr@...> wrote:
I need to download a fresh image for my UDRC2 and DR1X repeater. Can someone point me to where I can download a fresh image? My original image doesnt want to work right. Cant even SSH in to it. Keeps telling me, Connection Refused!!
Thanks in advance



--


John D. Hays
Director

  


UDRC2 and DR1X

Johnny
 

I need to download a fresh image for my UDRC2 and DR1X repeater. Can someone point me to where I can download a fresh image? My original image doesnt want to work right. Cant even SSH in to it. Keeps telling me, Connection Refused!!
Thanks in advance


Re: BETA9 Clean Install - Need to Edit app_config.sh Depending on what you want to install #betaimage

Basil Gunn
 

Thanks Bernard. Yes please show me the symptom you are seeing so I can
correct the problem.
/Basil


f6bvp <f6bvp@...> writes:

Hi Basil,
I just found that in beta9 ncursesw5 libraries are only partially installed.
I can provide details if needed.

Bernard f6bvp
Le 28 févr. 2019 à 16:35, Basil Gunn <@basil860> a écrit :


As the Getting Started Guide points out you need to run
./app_config.sh core

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

The app_config.sh script takes an argument DO NOT edit this script.
/Basil n7nix


Re: BETA9 Clean Install - Need to Edit app_config.sh Depending on what you want to install #betaimage

Bernard f6bvp / ai7bg
 

Hi Basil,
I just found that in beta9 ncursesw5 libraries are only partially installed.
I can provide details if needed.

Bernard f6bvp

Le 28 févr. 2019 à 16:35, Basil Gunn <@basil860> a écrit :


As the Getting Started Guide points out you need to run
./app_config.sh core

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started

The app_config.sh script takes an argument DO NOT edit this script.
/Basil n7nix


Re: Draws Manager #drawsmanager

 

Thanks


On Wed, Mar 6, 2019, 08:34 Mike - KB0FX <mweilb@...> wrote:
Team - Great job on the DRAWS Manager!


Draws Manager #drawsmanager

Mike - KB0FX
 

Team - Great job on the DRAWS Manager!


 

Yes, you will need to stop and start the daemon (or reboot) to pickup the new direwolf, if you have it running..

sudo systemctl stop direwolf
sudo systemctl start direwolf


On Tue, Mar 5, 2019 at 4:02 PM Basil Gunn <basil@...> wrote:

John D Hays - K7VE <john@...> writes:

>> With this new direwolf executable, you can run
> direwolf -c /etc/direwolf.conf

And that will get you the "Device or resource busy" shown below because
direwolf is started with systemd. So do NOT do that. I only support
direwolf running as a modem.

$ pidof direwolf
352
$ systemctl status direwolf

$ systemctl status direwolf
● direwolf.service - Direwolf Daemon
   Loaded: loaded (/etc/systemd/system/direwolf.service; enabled; vendor preset: enabled)
   Active: active (running) since Tue 2019-03-05 14:35:12 PST; 1h 22min ago
  Process: 339 ExecStartPre=/bin/rm -f /tmp/kisstnc (code=exited, status=0/SUCCESS)
 Main PID: 352 (direwolf)
   CGroup: /system.slice/direwolf.service
           └─352 /usr/bin/direwolf -t 0 -c /etc/direwolf.conf -p

$ direwolf -c /etc/direwolf.conf
Dire Wolf DEVELOPMENT version 1.6 B (Mar  5 2019)
Includes optional support for:  gpsd hamlib

Reading config file /etc/direwolf.conf
Audio device for both receive and transmit: plughw:CARD=udrc,DEV=0  (channels 0 & 1)
Could not open audio device plughw:CARD=udrc,DEV=0 for input
Device or resource busy
Pointless to continue without audio device.

/Basil

> There are two primary ways direwolf is used.  One is simply as a modem,
> with only modem specific features in direwolf.conf and all other functions
> created by external programs and/or protocol stacks.  The other is
> configuring various (mostly APRS) functions within direwolf.conf - either
> approach is valid, and can be mixed and matched. Basil tends to use the
> modem only approach.





--


John D. Hays
Edmonds, WA
K7VE

   


Basil Gunn
 

John D Hays - K7VE <@john_hays> writes:

With this new direwolf executable, you can run
direwolf -c /etc/direwolf.conf
And that will get you the "Device or resource busy" shown below because
direwolf is started with systemd. So do NOT do that. I only support
direwolf running as a modem.

$ pidof direwolf
352
$ systemctl status direwolf

$ systemctl status direwolf
● direwolf.service - Direwolf Daemon
Loaded: loaded (/etc/systemd/system/direwolf.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2019-03-05 14:35:12 PST; 1h 22min ago
Process: 339 ExecStartPre=/bin/rm -f /tmp/kisstnc (code=exited, status=0/SUCCESS)
Main PID: 352 (direwolf)
CGroup: /system.slice/direwolf.service
└─352 /usr/bin/direwolf -t 0 -c /etc/direwolf.conf -p

$ direwolf -c /etc/direwolf.conf
Dire Wolf DEVELOPMENT version 1.6 B (Mar 5 2019)
Includes optional support for: gpsd hamlib

Reading config file /etc/direwolf.conf
Audio device for both receive and transmit: plughw:CARD=udrc,DEV=0 (channels 0 & 1)
Could not open audio device plughw:CARD=udrc,DEV=0 for input
Device or resource busy
Pointless to continue without audio device.

/Basil

There are two primary ways direwolf is used. One is simply as a modem,
with only modem specific features in direwolf.conf and all other functions
created by external programs and/or protocol stacks. The other is
configuring various (mostly APRS) functions within direwolf.conf - either
approach is valid, and can be mixed and matched. Basil tends to use the
modem only approach.


 



On Tue, Mar 5, 2019 at 3:28 PM Rico Abagnale <rico@...> wrote:
Here you are. And finally I’ve seen the missing two lines.
 
> This includes support for gpsd.
> This includes support for hamlib.
> This does NOT include support for CM108/CM119 PTT.
 
 
Next step - install with:
 
        sudo make install


With this new direwolf executable, you can run

direwolf -c /etc/direwolf.conf

Assuming your direwolf.conf is in /etc -- within that file, setup your gpsd connection and beacons.

Note: direwolf is authored by WB2OSZ -- his repository is at  https://github.com/wb2osz/direwolf including an 'issues' link.

There are two primary ways direwolf is used.  One is simply as a modem, with only modem specific features in direwolf.conf and all other functions created by external programs and/or protocol stacks.  The other is configuring various (mostly APRS) functions within direwolf.conf - either approach is valid, and can be mixed and matched. Basil tends to use the modem only approach.


--


John D. Hays
Edmonds, WA
K7VE

   


Rico Abagnale, DG5BQ
 

Here you are. And finally I’ve seen the missing two lines.


pi@WoMoAPRSetc:~ $ gpsd -V
gpsd: 3.18.1 (revision 3.18.1)
pi@WoMoAPRSetc:~ $ cd /usr/local/src/direwolf-dev
pi@WoMoAPRSetc:/usr/local/src/direwolf-dev $ make clean
rm -f direwolf decode_aprs text2tt tt2text ll2utm utm2ll aclients atest log2gpx gen_packets ttcalc kissutil cm108 gen_fff tune.h fsk_fast_filter.h *.o *.a direwolf.desktop
pi@WoMoAPRSetc:/usr/local/src/direwolf-dev $ make -j4
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o direwolf.o direwolf.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o config.o config.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o recv.o recv.c
echo " " > tune.h
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -DGEN_FFF -o gen_fff demod_afsk.c dsp.c textcolor.c -lm -lpthread -lrt -lasound -lgps -lhamlib
echo " " > tune.h
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dsp.o dsp.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o demod_psk.o demod_psk.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o demod_9600.o demod_9600.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o hdlc_rec.o hdlc_rec.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o hdlc_rec2.o hdlc_rec2.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o multi_modem.o multi_modem.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o rdq.o rdq.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o rrbb.o rrbb.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dlq.o dlq.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o fcs_calc.o fcs_calc.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o ax25_pad.o ax25_pad.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o ax25_pad2.o ax25_pad2.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o xid.o xid.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o decode_aprs.o decode_aprs.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o symbols.o symbols.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o server.o server.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o kiss.o kiss.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o kissserial.o kissserial.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o kissnet.o kissnet.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o kiss_frame.o kiss_frame.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o hdlc_send.o hdlc_send.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o gen_tone.o gen_tone.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o audio.o audio.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o audio_stats.o audio_stats.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o digipeater.o digipeater.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o cdigipeater.o cdigipeater.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o pfilter.o pfilter.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dedupe.o dedupe.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o tq.o tq.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o xmit.o xmit.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o morse.o morse.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o ptt.o ptt.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o beacon.o beacon.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o encode_aprs.o encode_aprs.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o latlong.o latlong.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o textcolor.o textcolor.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dtmf.o dtmf.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o aprs_tt.o aprs_tt.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o tt_user.o tt_user.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o tt_text.o tt_text.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o igate.o igate.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o waypoint.o waypoint.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o serial_port.o serial_port.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o log.o log.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o telemetry.o telemetry.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dwgps.o dwgps.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dwgpsnmea.o dwgpsnmea.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dwgpsd.o dwgpsd.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dtime_now.o dtime_now.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o mheard.o mheard.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o ax25_link.o ax25_link.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o cm108.o cm108.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -I. -c -o strlcpy.o misc/strlcpy.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -I. -c -o strlcat.o misc/strlcat.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o error_string.o geotranz/error_string.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o mgrs.o geotranz/mgrs.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o polarst.o geotranz/polarst.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o tranmerc.o geotranz/tranmerc.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o ups.o geotranz/ups.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o usng.o geotranz/usng.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -c -o utm.o geotranz/utm.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o ttcalc.o ttcalc.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o dwsock.o dwsock.c
Generating customized direwolf.desktop ...
./gen_fff > fsk_fast_filter.h
ar -cr misc.a strlcpy.o strlcat.o
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -DDECAMAIN -o decode_aprs decode_aprs.c kiss_frame.c ax25_pad.c dwgpsnmea.o dwgps.o dwgpsd.o serial_port.o symbols.o textcolor.o fcs_calc.o latlong.o log.o telemetry.o tt_text.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -DENC_MAIN -o text2tt tt_text.c misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -DDEC_MAIN -o tt2text tt_text.c misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -g -o aclients aclients.c ax25_pad.c fcs_calc.c textcolor.o misc.a 
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -o log2gpx log2gpx.c textcolor.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -o gen_packets gen_packets.c ax25_pad.c hdlc_send.c fcs_calc.c gen_tone.c morse.c dtmf.c textcolor.c dsp.c misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -g -o ttcalc ttcalc.o ax25_pad.o fcs_calc.o textcolor.o misc.a 
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -g -DKISSUTIL -o kissutil kissutil.c kiss_frame.c ax25_pad.o fcs_calc.o textcolor.o serial_port.o dtime_now.o dwsock.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -g -DCM108_MAIN -o cm108 cm108.c textcolor.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o demod.o demod.c
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB   -c -o demod_afsk.o demod_afsk.c
ar -cr geotranz.a error_string.o mgrs.o polarst.o tranmerc.o ups.o usng.o utm.o
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -o ll2utm ll2utm.c geotranz.a textcolor.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -o utm2ll utm2ll.c geotranz.a textcolor.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -o direwolf direwolf.o config.o recv.o demod.o dsp.o demod_afsk.o demod_psk.o demod_9600.o hdlc_rec.o hdlc_rec2.o multi_modem.o rdq.o rrbb.o dlq.o fcs_calc.o ax25_pad.o ax25_pad2.o xid.o decode_aprs.o symbols.o server.o kiss.o kissserial.o kissnet.o kiss_frame.o hdlc_send.o gen_tone.o audio.o audio_stats.o digipeater.o cdigipeater.o pfilter.o dedupe.o tq.o xmit.o morse.o ptt.o beacon.o encode_aprs.o latlong.o textcolor.o dtmf.o aprs_tt.o tt_user.o tt_text.o igate.o waypoint.o serial_port.o log.o telemetry.o dwgps.o dwgpsnmea.o dwgpsd.o dtime_now.o mheard.o ax25_link.o cm108.o misc.a geotranz.a -lm -lpthread -lrt -lasound -lgps -lhamlib
gcc -O3 -pthread -Igeotranz -D_XOPEN_SOURCE=600 -D_DEFAULT_SOURCE=1 -Wall -D_BSD_SOURCE -ffast-math -mfpu=neon -DUSE_ALSA -DENABLE_GPSD -DUSE_HAMLIB -o atest atest.c demod.o demod_afsk.o demod_psk.o demod_9600.o dsp.o hdlc_rec.o hdlc_rec2.o multi_modem.o rrbb.o fcs_calc.o ax25_pad.o decode_aprs.o dwgpsnmea.o dwgps.o dwgpsd.o serial_port.o telemetry.o dtime_now.o latlong.o symbols.o tt_text.o textcolor.o misc.a -lm -lpthread -lrt -lasound -lgps -lhamlib
 
> This includes support for gpsd.
> This includes support for hamlib.
> This does NOT include support for CM108/CM119 PTT.
 
 
Next step - install with:
 
        sudo make install


Am 06.03.2019 um 00:05 schrieb Basil Gunn <basil@...>:


Your direwolf config file is here:

/etc/direwolf.conf

Please cut & paste the console output of the following commands in an
email to me.

gpsd -V

cd /usr/local/src/direwolf-dev
make clean
make -j4

/Basil

Rico Abagnale <rico@...> writes:

So, now I tried to follow all the steps in „Raspberry-Pi-APRS-Tracker.pdf” and got stuck at section 5 beginning with „cd /home/pi/direwolf…” because I don’t have such a directory.
And still: I don’t get the two lines „ This includes…..”

Am 05.03.2019 um 22:19 schrieb Basil Gunn <basil@...>:

Basil, does the beta build have GPS compile switch turned on, it is not
default in the make

If you are talking about Xastir, it is installed from a debian package.
If you are talking about Direwolf, I treat it like a modem and do the
application stuff from applications.

From the direwolf doc it seems like if gpsd & libgps-dev are installed
before direwolf is built then it will build with gps functionality. That
is currently NOT the case.

To fix this, since gpsd & libgps-dev are installed, rebuild direwolf.

cd /usr/local/src/direwolf-dev
make -j4
sudo make install

Look for the following printed out at the end of the make

This includes support for gpsd.
This includes support for hamlib.

/Basil

On Tue, Mar 5, 2019, 12:09 Rico Abagnale <rico@...> wrote:

Hi Basil,

thanks for the update.
All commands figuring out whether gps works report a normal behavior of
the gps module.
However, when I tell direwolf to beacon regularly the position taken from
the gpsd, nothing happens. Calling „systemctl status direwolf” shows a
fault message that gps has to be configured first. So it looks as if
direwolf doesn’t want to use the data of the gpsd.

/Rico

*Rico Abagnale*
*Noldeweg 6*
*D-74372 Sersheim*
*GERMANY*
*Tel.: +49 (0) 70 42 8 12 42 45*
*Fax: +49 (0) 70 42 8 12 42 46*
*mobil: +49 (0) 171 45 10 711*
*rico@... <rico@...>*

Am 05.03.2019 um 21:04 schrieb Basil Gunn <basil@...>:

Hi Rico,

Thank you for sending the output to showudrc.sh
Everything looks to be OK for the DRAWS hat.

I just configured a new instance of Xastir and find the same symptom as
you do. I have a call into one of the Xastir dev's to see if we can find
a solution to this problem.
I also configured a new instance of YAAC and gps works fine through the
gpsd tcp interface with this app.

To verify gps activity from the DRAWS hat you can run either of these
commands in a console.

gpsmon
cgps

/Basil

Rico Abagnale <rico@...> writes:

Hello Basil,
here comes the output of showudrc.sh. It’s quite long…
After the listing you can find a screenshot of the settings for the GPS. I
hope that’s what you meant.

Many thanks for your help…





Basil Gunn
 

Your direwolf config file is here:

/etc/direwolf.conf

Please cut & paste the console output of the following commands in an
email to me.

gpsd -V

cd /usr/local/src/direwolf-dev
make clean
make -j4

/Basil

Rico Abagnale <@RicoDG5BQ> writes:

So, now I tried to follow all the steps in „Raspberry-Pi-APRS-Tracker.pdf” and got stuck at section 5 beginning with „cd /home/pi/direwolf…” because I don’t have such a directory.
And still: I don’t get the two lines „ This includes…..”

Am 05.03.2019 um 22:19 schrieb Basil Gunn <@basil860>:

Basil, does the beta build have GPS compile switch turned on, it is not
default in the make

If you are talking about Xastir, it is installed from a debian package.
If you are talking about Direwolf, I treat it like a modem and do the
application stuff from applications.

From the direwolf doc it seems like if gpsd & libgps-dev are installed
before direwolf is built then it will build with gps functionality. That
is currently NOT the case.

To fix this, since gpsd & libgps-dev are installed, rebuild direwolf.

cd /usr/local/src/direwolf-dev
make -j4
sudo make install

Look for the following printed out at the end of the make

This includes support for gpsd.
This includes support for hamlib.

/Basil

On Tue, Mar 5, 2019, 12:09 Rico Abagnale <@RicoDG5BQ> wrote:

Hi Basil,

thanks for the update.
All commands figuring out whether gps works report a normal behavior of
the gps module.
However, when I tell direwolf to beacon regularly the position taken from
the gpsd, nothing happens. Calling „systemctl status direwolf” shows a
fault message that gps has to be configured first. So it looks as if
direwolf doesn’t want to use the data of the gpsd.

/Rico

*Rico Abagnale*
*Noldeweg 6*
*D-74372 Sersheim*
*GERMANY*
*Tel.: +49 (0) 70 42 8 12 42 45*
*Fax: +49 (0) 70 42 8 12 42 46*
*mobil: +49 (0) 171 45 10 711*
*@RicoDG5BQ <@RicoDG5BQ>*

Am 05.03.2019 um 21:04 schrieb Basil Gunn <@basil860>:

Hi Rico,

Thank you for sending the output to showudrc.sh
Everything looks to be OK for the DRAWS hat.

I just configured a new instance of Xastir and find the same symptom as
you do. I have a call into one of the Xastir dev's to see if we can find
a solution to this problem.
I also configured a new instance of YAAC and gps works fine through the
gpsd tcp interface with this app.

To verify gps activity from the DRAWS hat you can run either of these
commands in a console.

gpsmon
cgps

/Basil

Rico Abagnale <@RicoDG5BQ> writes:

Hello Basil,
here comes the output of showudrc.sh. It’s quite long…
After the listing you can find a screenshot of the settings for the GPS. I
hope that’s what you meant.

Many thanks for your help…


Basil Gunn
 

Rico Abagnale <@RicoDG5BQ> writes:

I followed the steps below but didn’t see the two mentioned lines. So I will do the whole installation process, written down in the „Raspberry-Pi-ARRS-Tracker.pdf”.
Please cut & pathe the console output of the following in an email to
me.

gpsd -V

cd /usr/local/src/direwolf-dev
make clean
make -j4

/Basil


Rico Abagnale, DG5BQ
 

So, now I tried to follow all the steps in „Raspberry-Pi-APRS-Tracker.pdf” and got stuck at section 5 beginning with „cd /home/pi/direwolf…” because I don’t have such a directory.
And still: I don’t get the two lines „ This includes…..”



Am 05.03.2019 um 22:19 schrieb Basil Gunn <basil@...>:


Basil, does the beta build have GPS compile switch turned on, it is not
default in the make

If you are talking about Xastir, it is installed from a debian package.
If you are talking about Direwolf, I treat it like a modem and do the
application stuff from applications.

From the direwolf doc it seems like if gpsd & libgps-dev are installed
before direwolf is built then it will build with gps functionality. That
is currently NOT the case.

 To fix this, since gpsd & libgps-dev are installed, rebuild direwolf.

  cd /usr/local/src/direwolf-dev
  make -j4
  sudo make install

Look for the following printed out at the end of the make

This includes support for gpsd.
This includes support for hamlib.

/Basil

On Tue, Mar 5, 2019, 12:09 Rico Abagnale <rico@...> wrote:

Hi Basil,

thanks for the update.
All commands figuring out whether gps works report a normal behavior of
the gps module.
However, when I tell direwolf to beacon regularly the position taken from
the gpsd, nothing happens. Calling „systemctl status direwolf” shows a
fault message that gps has to be configured first. So it looks as if
direwolf doesn’t want to use the data of the gpsd.

/Rico


*Rico Abagnale*
*Noldeweg 6*
*D-74372 Sersheim*
*GERMANY*
*Tel.: +49 (0) 70 42 8 12 42 45*
*Fax: +49 (0) 70 42 8 12 42 46*
*mobil: +49 (0) 171 45 10 711*
*rico@... <rico@...>*

Am 05.03.2019 um 21:04 schrieb Basil Gunn <basil@...>:


Hi Rico,

Thank you for sending the output to showudrc.sh
Everything looks to be OK for the DRAWS hat.

I just configured a new instance of Xastir and find the same symptom as
you do. I have a call into one of the Xastir dev's to see if we can find
a solution to this problem.
I also configured a new instance of YAAC and gps works fine through the
gpsd tcp interface with this app.

To verify gps activity from the DRAWS hat you can run either of these
commands in a console.

gpsmon
cgps

/Basil


Rico Abagnale <rico@...> writes:

Hello Basil,
here comes the output of showudrc.sh. It’s quite long…
After the listing you can find a screenshot of the settings for the GPS. I
hope that’s what you meant.

Many thanks for your help…



Rico Abagnale, DG5BQ
 

I followed the steps below but didn’t see the two mentioned lines. So I will do the whole installation process, written down in the „Raspberry-Pi-ARRS-Tracker.pdf”.
Will get back with the result...


Am 05.03.2019 um 22:19 schrieb Basil Gunn <basil@...>:


Basil, does the beta build have GPS compile switch turned on, it is not
default in the make

If you are talking about Xastir, it is installed from a debian package.
If you are talking about Direwolf, I treat it like a modem and do the
application stuff from applications.

From the direwolf doc it seems like if gpsd & libgps-dev are installed
before direwolf is built then it will build with gps functionality. That
is currently NOT the case.

 To fix this, since gpsd & libgps-dev are installed, rebuild direwolf.

  cd /usr/local/src/direwolf-dev
  make -j4
  sudo make install

Look for the following printed out at the end of the make

This includes support for gpsd.
This includes support for hamlib.

/Basil

On Tue, Mar 5, 2019, 12:09 Rico Abagnale <rico@...> wrote:

Hi Basil,

thanks for the update.
All commands figuring out whether gps works report a normal behavior of
the gps module.
However, when I tell direwolf to beacon regularly the position taken from
the gpsd, nothing happens. Calling „systemctl status direwolf” shows a
fault message that gps has to be configured first. So it looks as if
direwolf doesn’t want to use the data of the gpsd.

/Rico


*Rico Abagnale*
*Noldeweg 6*
*D-74372 Sersheim*
*GERMANY*
*Tel.: +49 (0) 70 42 8 12 42 45*
*Fax: +49 (0) 70 42 8 12 42 46*
*mobil: +49 (0) 171 45 10 711*
*rico@... <rico@...>*

Am 05.03.2019 um 21:04 schrieb Basil Gunn <basil@...>:


Hi Rico,

Thank you for sending the output to showudrc.sh
Everything looks to be OK for the DRAWS hat.

I just configured a new instance of Xastir and find the same symptom as
you do. I have a call into one of the Xastir dev's to see if we can find
a solution to this problem.
I also configured a new instance of YAAC and gps works fine through the
gpsd tcp interface with this app.

To verify gps activity from the DRAWS hat you can run either of these
commands in a console.

gpsmon
cgps

/Basil


Rico Abagnale <rico@...> writes:

Hello Basil,
here comes the output of showudrc.sh. It’s quite long…
After the listing you can find a screenshot of the settings for the GPS. I
hope that’s what you meant.

Many thanks for your help…