|
Re: #BETA7 Download
#beta7
Two more data points, I was able to pull down beta7 via an AWS instance (hosted in PDX) in about 15 minutes. It took about 16 minutes from a host connected via Comcast cable modem (hosted in Seattle). Kenny, KU7M
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: #BETA7 Download
#beta7
Mike - KB0FX <mweilb@gmail.com> writes:
The download is taking a very long time. Going on 2 hours. I have aBesides your internet connection download time also depends on your ISP, method of xfer, OS & computer. Not sure when you started your download but around 30min. after your post my download took 9min 21s. The rackspace server hosting the file lives in San Antonio, Tx. time wget http://nwdig.net/downloads/draws_beta7.zip --2019-01-07 11:08:44-- http://nwdig.net/downloads/draws_beta7.zip Resolving nwdig.net (nwdig.net)... 173.203.212.50 Connecting to nwdig.net (nwdig.net)|173.203.212.50|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 2425785957 (2.3G) [application/zip] Saving to: ‘draws_beta7.zip’ draws_beta7.zip 100%[===================================================================>] 2.26G 3.43MB/s in 9m 21s 2019-01-07 11:18:06 (4.12 MB/s) - ‘draws_beta7.zip’ saved [2425785957/2425785957] /Basil
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: #BETA7 Download
#beta7
William Franzin (VE4VR)
We have a 20gig fiber connection in a data center for VA4WAN here in Winnipeg Canada. We could easily run a mirror here for ham firmware like this? No traffic/speed limits, there's a few local hams that happen to own a ISP/VoIP/WISP/colo provider so our project just runs on the side of that infrastructure. Best regards William
On Mon, Jan 7, 2019 at 12:52 PM David [kg5eiu] via Groups.Io <dcappello=aol.com@groups.io> wrote:
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: #BETA7 Download
#beta7
Hi mIke,
toggle quoted messageShow quoted text
I suspect they have it metered on their end - I am in same boat 100M down and it trickled out - it took a bit but I finally got the 2G+ image no issues. 73!! David (KG5EIU)
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
#BETA7 Download
#beta7
The download is taking a very long time. Going on 2 hours. I have a 100 Mbps Fiber connection to the Internet. Any thoughts?
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Watch "D.R.A.W.S. - the Digital Radio Amateur Workstation from NW Digital Radio" on YouTube
#draws
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: AllStarLink channel driver for UDRC/DRAWS
toggle quoted messageShow quoted text
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: one stop shop for sound level questions
#documentation
#draws
#beta
now, for dumping the settings, the alsa-show.sh script is in theDocumentation only supports the latest image, in this case BETA7 where alsa-show.sh is in the local bin directory. so if you have a set ofYou also need to share the pertinent settings of your radio or even better, do a factory reset to start from a common place. I'll be dumping mine after I upgrade to beta 7 and run my test script
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: Beta7 release announcement
Art - KC7SDA
quick point I started an audio settings thread for people to add their configurations to for comparison between different rigs and other audio notes.
Art
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
one stop shop for sound level questions
#documentation
#draws
#beta
Art - KC7SDA
Ok, so I think we needed one place with all of the definitions of each setting and its reasoning behind it.
I don't understand about the xk ohm resistor settings, nor what each setting is in the mixer and what it will change (ie this slider will change the overall output-speaker volume and this one will change the input on the left channel) Also I want to share fldigi settings on this so we can troubleshoot and get them right for both the left and right channels Please note, I'm assuming the din next to the gps is channel 1 (or 0 in direwolfs case) and the other din is channel 2 for fldigi, sound card settings are: port audio: udrc both record and playback on right channel tab, both reverse in transmit and receive are checked (this is for channel 1) for gpio i'm using BCM pin 12 (GPIO 26) with the value box checked now, for dumping the settings, the alsa-show.sh script is in the n7nix/bin directory (wasn't in my user bin), so if you have a set of settings that work, please post them, I'm interested in the variances between setups and what people find work the best, please include your radio and if you have to change settings (just say which ones and what direction, you don't have to post another list of settings) I'll be dumping mine after I upgrade to beta 7 and run my test script 73 Art
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
AllStarLink channel driver for UDRC/DRAWS
William Franzin (VE4VR)
Good evening Does anyone have a working channel driver for the UDRC/DRAWS board? I've borrowed a UDRC board and also have another controller based on the same codec and want to get them both up and running for AllStarLink. Thought I'd ask before doing it .. With nice hardware like this it's fairly easy. Just need the alsa driver and gpio and we're good. The same thing exists already for BeagleBone using gpio. Best regards William
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: Beta7 release announcement
William,
Please let us know your experiences using the IC-7000 with the software you are trying to run. I need to compare my outcomes with other 7000 owners. I will be loading Beta 7 this evening to give it a try.
KD4IZ Jack Spitznagel FM19oo
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of William Franzin
This is great, really glad to see the IC-7000 scripts since that's my test radio.
Install was really quick without the apps running during install too.
Best regards William
On Sun, Jan 6, 2019 at 11:59 AM Basil Gunn <basil@...> wrote:
-- J Spitznagel Science River LLC KD4IZ
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: JS8Call
#js8call
You can determine the js8call version installed on your DRAWS image like
toggle quoted messageShow quoted text
this: dpkg -l "js8*" Draws Beta7 image has js8call 0.12.0-devel This js8call version was released Jan. 2. /Basil John D Hays - K7VE <john@hays.org> writes:
John Hays has shared a link to the following document:
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
JS8Call
#js8call
John Hays has shared a link to the following document:  Releases for JS8CALL are happening very rapidly, so you may wish to become familiar with the download and install process.Download the Raspbian '.deb' file and use apt-get install to install it on your Pi for DRAWS™ HAT
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Re: Beta7 release announcement
William Franzin (VE4VR)
This is great, really glad to see the IC-7000 scripts since that's my test radio. Install was really quick without the apps running during install too. Best regards William
On Sun, Jan 6, 2019 at 11:59 AM Basil Gunn <basil@...> wrote:
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Beta7 release announcement
Before you update your image capture your current alsamixer settings
somewhere. Run ~/bin/alsa-show.sh & make a copy of result. Latest image current_beta.zip has been updated to draws_beta7.zip at this location: http://images.nwdigitalradio.com/downloads ChangeLog entry for Beta7: * configure chrony to use Network if GPS not found * gpsd built from source for version 3.18.1 * udrc-dkms driver bumped to 1.0.5 * driver has 3 new ALSA controls: * DAC Right Playback PowerTune * DAC Left Playback PowerTune * LO Playback Common Mode * Boot with direwolf/ax.25 NOT running/enabled * Put image version in /var/log/udr_install.log List of git changes since draws_beta6.zip e843eb7 - n7nix, 17 minutes ago : Make docs match BETA7 script changes. 3c4300e - n7nix, 19 minutes ago : Add Pi 3 Model B by Stadium & Pi 3Model A+ 0c88443 - n7nix, 21 hours ago : Minor wordsmithing. 2132349 - n7nix, 21 hours ago : Fix for syncing with kernel clock & allow setting time when gps not connected. 58cd332 - n7nix, 21 hours ago : Default to NOT enabling direwolf & ax.25 systemd service files. c977364 - n7nix, 22 hours ago : Add BETA6 & 7 entries. e165d4b - n7nix, 22 hours ago : Display SD card image version. ad5bf6f - n7nix, 22 hours ago : Display SD card image version. d661fb2 - n7nix, 3 days ago : Script to setup ALSA controls for an iCom IC-7000. 45e01c2 - n7nix, 3 days ago : Fix not setting card name when calling amixer. db058b9 - n7nix, 3 days ago : Notes from testing with Corky's IC-7000 f982728 - n7nix, 3 days ago : Add check for number of ALSA controls so will work with older udrc-dkms driver. 6e0d0b3 - n7nix, 3 days ago : Add ALSA setting script & make setalsa-ft817.sh executable. 739dfb7 - n7nix, 4 days ago : Bump js8call version to latest, 0.12.0 3711677 - n7nix, 4 days ago : Add script to refresh local bin after a git pull. 9136991 - n7nix, 4 days ago : Put the alsa levels msg in correct location, add console output for local bin dir copy. 34c982b - n7nix, 4 days ago : Get rid of unused option parse. 79a01b0 - n7nix, 4 days ago : Change ax25-status to give systemd status only, add a debug mode for verbose status. f5d6f0f - n7nix, 4 days ago : Add systemd enable/disable to ax25-start/stop 98d18f9 - n7nix, 4 days ago : Add comma. d98b0bb - n7nix, 4 days ago : Comment change for gpsd & chronyc. 03b180d - n7nix, 4 days ago : Add receive audio notes for IC-7000 bc8ac06 - n7nix, 4 days ago : Shorten some verbage to make table present better. c6813d7 - n7nix, 4 days ago : Add doc for new ALSA controls for DRAWS hat. ddda603 - n7nix, 4 days ago : Separate ALSA controls for transmit & receive. 8d64d57 - n7nix, 6 days ago : Add info for IC-7000. 07497b8 - n7nix, 6 days ago : Change url for image download. 99cae44 - n7nix, 7 days ago : Add warning for ruining your HD. 529cbd0 - n7nix, 7 days ago : Fix line wrap problem on header. 8332562 - n7nix, 8 days ago : Add display of gpsd version. 8500710 - n7nix, 8 days ago : Separate application notes from Radio hardware notes. 08de3af - n7nix, 8 days ago : Fix, gpsd not aprsd. 0461157 - n7nix, 8 days ago : Add check of gpsd. 1fa6be5 - n7nix, 9 days ago : Fix problem of shell commands inside heredoc. d8c2b45 - n7nix, 9 days ago : Notes & script for Yaesu ft-817 & fldigi. 93f5e8c - n7nix, 10 days ago : Add more info for setting up FT-817. fe07d6b - n7nix, 10 days ago : Explanation for cfgcheck.sh script. eb64069 - n7nix, 10 days ago : Add information on some common HAM radios. 297c886 - n7nix, 10 days ago : Add clarification for how to disable direwolf 1cceae1 - n7nix, 11 days ago : Fix broken links after markdown files moved to /docs. bbe3cca - n7nix, 11 days ago : Fix munged variable name 666b98d - n7nix, 11 days ago : Set return codes incase first conditional check fails. 2833a44 - n7nix, 11 days ago : Git rid of random stray characters. cf7358d - n7nix, 11 days ago : Move UDRC/DRAWS markdown files to docs directory. bb5a116 - n7nix, 11 days ago : Add description of what app_config.sh core does. 933db3e - n7nix, 11 days ago : Add chronyc makestep command. 4708241 - n7nix, 11 days ago : Update version # for js8call 15682fc - n7nix, 12 days ago : Get is_password, is_hostname, is_logappcfg functions working. a52b424 - n7nix, 12 days ago : Set global return codes for debugging. 6432141 - n7nix, 12 days ago : Use generic image name current_beta. a5d244b - n7nix, 12 days ago : DRAWS_CONFIG.md 484f433 - n7nix, 12 days ago : Add some debug statements. bf6b5b3 - n7nix, 12 days ago : Get rid of excess console output 6a843d1 - n7nix, 12 days ago : Add IN1 & IN2 display. a6effbb - n7nix, 12 days ago : Fix comments to match settings. 5d22d65 - n7nix, 12 days ago : Get rid of excess white space. 0b6e53c - n7nix, 12 days ago : Add check for app_config.sh core been already run.
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Brian Badger
Link is now active. The in-browser 3d viewer will let you flip it around and disagree with the design to your hearts content.
https://www.thingiverse.com/thing:3333435 SCAD attached. I made some minor tweaks, but haven't printed yet. Powerpole mount is now configurable. -- Brian Badger N0KZ
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Jeff Marden
Hello Basil:
Understood and Thanks (again). Also thanks to Jack for testing & publishing his FT-817 config info & results! -- Jeff Marden N1JCM
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Basil and All,
toggle quoted messageShow quoted text
I set up the FT-817, broke miniDIN6 pin #6 in a spare cable to nop the squelch. So, direwolf/Xastir did transmit sound at those original alsamixer and FT-817 settings below: ===== ALSA Controls for Radio Transmit ===== < (I just had to fix Tansmit to Transmit, compulsive speller!) LO Driver Gain L:[-6.00dB] R:[-6.00dB] PCM L:[-16.50dB] R:[-16.50dB] DAC Playback PT L:[PTM_P3] R:[PTM_P3] LO Playback CM [ Full Chip CM] ===== ALSA Controls for Radio Receive ===== ADC Level L:[-2.00dB] R:[-2.00dB] IN1 L:[Off] R:[Off] IN2 L:[10 kOhm] R:[10 kOhm] The FT-817 [menu #25] DIG MIC is set 65 as was recommended. However, using fldigi, the FT-817 was transmitting noise with high ALC with the settings above. I played with the sound and rig input settings until I got to the following settings: ===== ALSA Controls for Radio Transmit ===== < (again) LO Driver Gain L:[-2.00dB] R:[-2.00dB] PCM L:[-8.00dB] R:[-8.00dB] DAC Playback PT L:[PTM_P1] R:[PTM_P1] LO Playback CM [Full Chip CM] ===== ALSA Controls for Radio Receive ===== ADC Level L:[-2.00dB] R:[-2.00dB] IN1 L:[Off] R:[Off] IN2 L:[10 kOhm] R:[10 kOhm] The FT-817 [menu #25] DIG MIC is set to 25 instead of 65. There is no ALC reading (1 bar or less), signal looked very clean on the panadapter scope and immediately had a QSO with HI8MU in the Dominican Republic and received RSQ of 599 - running 5W with a GAP Titan vertical on 20 meters. I think that qualifies as success. Using the same settings had an wsjt-x FT8 20M QSO with KC9FLD in Dubuque, IA received a -22 report but no retransmits - I consider that a success. Again the ALC was one bar or less. The changes in settings has no effect on direwolf/Xastir performance. I am going to alter the local script to set up the FT-817 this way. I won't have to re-adjust the FT-817 [menu #25] DIG MIC setting again since this is the new TNC/sound card. 😊 Now back to the IC-7000! KD4IZ Jack Spitznagel FM19oo
-----Original Message-----
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Basil Gunn Sent: Friday, January 4, 2019 01:14 To: udrc@nw-digital-radio.groups.io Subject: Re: [udrc] DRAWS and the FT-817 In one of the Radio App Notes: FT-817, a reference is made to a config file "setalsa-ft817.sh", but I don't see this file in my BETA6 load and it reports no file when run.The script setalsa-ft817.sh is supported in the BETA7 image which hasn't been released yet. /Basil -- J Spitznagel Science River LLC KD4IZ
|
|||||||||||||||||||||||
|
|
|||||||||||||||||||||||
|
Ed Bloom, KD9FRQ
Thank you for sharing the inside picture.
Nice solution.
Ed Bloom, KD9FRQ
ewbloom@... Sent from Webmail access
-----Original Message-----
From: Brian Badger <brian@...> To: udrc <udrc@nw-digital-radio.groups.io> Sent: Fri, Jan 4, 2019 2:30 pm Subject: Re: [udrc] DRAWS case first draft #draws #case #cad #scad My kids bought me an Ender 3 for Christmas.
Looking at the inside you can see that there are four supports for both the top of the DRAWS hat and the bottom of the pi. The two tall screw towers are the only ones useable for fastening the case shut, which is non-optimal, but it actually fits snugly with no screws at all.
If you look at the scad file you can see how the powerpole mount works — there are tiny details that engage the roll pin holes. It is easy to install and remove but it doesn’t come loose during use. This detail was the main purpose of the case design. Everything else got very little attention.
Please note that the design is a remix of Thingiverse 2985738
—
Brian N0KZ
Nice solution Brian! Which 3D printer are you using?
Jack – KD4IZ
From: udrc@nw-digital-radio.groups.io <udrc@nw-digital-radio.groups.io> On Behalf Of Brian Badger
Sent: Friday, January 4, 2019 14:57 To: udrc@nw-digital-radio.groups.io Subject: Re: [udrc] DRAWS case first draft #draws #case #cad #scad <image001.jpg>
On Jan 4, 2019, at 12:51 PM, Ed Bloom, KD9FRQ <ewbloom@...> wrote:
-- J Spitznagel Science River LLC KD4IZ
|
|||||||||||||||||||||||
|
|
