udrc@nw-digital-radio.groups.io

Home Messages Hashtags Wiki

Between

and

Re: Just to be clear. What pins are for CAT? Graham Auld #4508 There is no CAT control on the DRAWS hat. The mini DINS are for the input/output of digital audio. You can attach two radios hence two connectors. CAT is done by a USB to CAT cable for your radio. You need to provide that cable. I was totally lost until I found a great series of videos starting at https://youtu.be/u6wz2kZJ5Vo These five videos take you calmly through setup step by step. That guy deserves a medal. All the best Graham - 2M0IJU
More All Messages By This Member
Re: Just to be clear. What pins are for CAT? Eric KD7CAO <kd7cao@...> #4507 John, Tried to click on that link but the file does not exist. Here is a screenshot of the folder: toggle quoted messageShow quoted text On Wed, Feb 19, 2020 at 5:59 PM John D Hays - K7VE <john@...> wrote: https://nw-digital-radio.groups.io/g/udrc/files/DRAWSTech.pdf may help as well. On Wed, Feb 19, 2020 at 3:54 PM John D. Hays <john@...> wrote: CAT is not part of the mini din interface specification. It was created as a standard long before CAT was popular. Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi. On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote: I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as there is not a simple how to list that I can find. The use of external interfacing is used by a lot of people trying to explain theur setups. I just want to get the Draws /Pi up and running non remotely at first. Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running. It genuinely is quite confusing sorry to say. I love the concept however, so am prepared to learn. cheers guys. 73, John VK5PO -- John D. Hays Kingston, WA K7VE -- John D. Hays Kingston, WA K7VE -- Eric M. Gildersleeve ~ KD7CAO Google Voice: 940-784-3029
More All Messages By This Member
DRAWS for sale #draws Kk6qms #4506 Hello- I have an unused DRAWS with a Pi3 and DRAWS image in orig USPS box and packaging. This has 2 radio cables and GPS antenna. I really do not have the time or ability at this point to use it so I would like to let it go. If interested in pics or coming up w a price please email me at kk6qms at arrl dot net. Thanks. Clifford KK6QMS
More All Messages By This Member
Re: Just to be clear. What pins are for CAT? John McRae #4505 cheers John. I thought that was the case. thanks for quick response!!! 73 On 20/02/2020 10:24 am, John D Hays - K7VE wrote: CAT is not part of the mini din interface specification. It was created as a standard long before CAT was popular. Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi. On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote: I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as there is not a simple how to list that I can find. The use of external interfacing is used by a lot of people trying to explain theur setups. I just want to get the Draws /Pi up and running non remotely at first. Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running. It genuinely is quite confusing sorry to say. I love the concept however, so am prepared to learn. cheers guys. 73, John VK5PO -- John D. Hays Kingston, WA K7VE -- MY GMAIL desktop Email accoount, JF McRae, VK5PO/VK5SIX
More All Messages By This Member
Re: Just to be clear. What pins are for CAT? Chris Metcalf #4504 Related-ish, does the "Accessory Connector HDR-4X2M" connector have another standardized name if I wanted to source a connector for it? I currently have female header jumpers connected to it, but I'd like something more robust. toggle quoted messageShow quoted text On Wed, Feb 19, 2020 at 3:59 PM John D Hays - K7VE <john@...> wrote: https://nw-digital-radio.groups.io/g/udrc/files/DRAWSTech.pdf may help as well. On Wed, Feb 19, 2020 at 3:54 PM John D. Hays <john@...> wrote: CAT is not part of the mini din interface specification. It was created as a standard long before CAT was popular. Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi. On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote: I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as there is not a simple how to list that I can find. The use of external interfacing is used by a lot of people trying to explain theur setups. I just want to get the Draws /Pi up and running non remotely at first. Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running. It genuinely is quite confusing sorry to say. I love the concept however, so am prepared to learn. cheers guys. 73, John VK5PO -- John D. Hays Kingston, WA K7VE -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Re: Just to be clear. What pins are for CAT? John D Hays - K7VE #4503 https://nw-digital-radio.groups.io/g/udrc/files/DRAWSTech.pdf may help as well. toggle quoted messageShow quoted text On Wed, Feb 19, 2020 at 3:54 PM John D. Hays <john@...> wrote: CAT is not part of the mini din interface specification. It was created as a standard long before CAT was popular. Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi. On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote: I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as there is not a simple how to list that I can find. The use of external interfacing is used by a lot of people trying to explain theur setups. I just want to get the Draws /Pi up and running non remotely at first. Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running. It genuinely is quite confusing sorry to say. I love the concept however, so am prepared to learn. cheers guys. 73, John VK5PO -- John D. Hays Kingston, WA K7VE -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Re: Just to be clear. What pins are for CAT? John D Hays - K7VE #4502 CAT is not part of the mini din interface specification. It was created as a standard long before CAT was popular. Most CAT control is done using USB to serial cables specific to the radio model and using the 4 USB ports on the Raspberry Pi. toggle quoted messageShow quoted text On Wed, Feb 19, 2020 at 3:50 PM John McRae <johnfmcrae.desktop@...> wrote: I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as there is not a simple how to list that I can find. The use of external interfacing is used by a lot of people trying to explain theur setups. I just want to get the Draws /Pi up and running non remotely at first. Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running. It genuinely is quite confusing sorry to say. I love the concept however, so am prepared to learn. cheers guys. 73, John VK5PO -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Just to be clear. What pins are for CAT? John McRae #4501 I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as there is not a simple how to list that I can find. The use of external interfacing is used by a lot of people trying to explain theur setups. I just want to get the Draws /Pi up and running non remotely at first. Without a basic how to, I feel a lot of hams like me will find it tedious etc, to get up and running. It genuinely is quite confusing sorry to say. I love the concept however, so am prepared to learn. cheers guys. 73, John VK5PO _._,_._,_ -- MY GMAIL desktop Email accoount, JF McRae, VK5PO/VK5SIX
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC Bernard f6bvp / ai7bg #4500 Hi Basil, I performed all instructions you gave and rebooted. However I could not connect to localhost:8080 Hi John, Here it is : root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp total 228 -rw-r--r-- 1 root staff 3372 sept. 19 23:25 amixer.js -rw-r--r-- 1 root staff 1166 sept. 19 23:25 app.js drwxr-sr-x 2 root staff 4096 sept. 19 23:25 bin -rw-r--r-- 1 root staff 0 févr. 18 18:33 draws-apps.json -rw-r--r-- 1 root staff 6111 sept. 19 23:25 io.js -rw-r--r-- 1 root staff 2593 sept. 19 23:25 mixerState.js drwxr-sr-x 255 root staff 12288 sept. 28 22:02 node_modules -rw-r--r-- 1 root staff 506 sept. 19 23:25 package.json -rw-r--r-- 1 root staff 175710 sept. 19 23:29 package-lock.json drwxr-sr-x 5 root staff 4096 sept. 19 23:25 public -rw-r--r-- 1 root staff 1254 sept. 19 23:25 radios.json drwxr-sr-x 2 root staff 4096 sept. 19 23:25 routes drwxr-sr-x 4 root staff 4096 sept. 19 23:25 views root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp/bin total 4 -rwxr-xr-x 1 root staff 1905 sept. 19 23:25 www root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp/bin/ total 4 -rwxr-xr-x 1 root staff 1905 sept. 19 23:25 www However, after doing a second time systemctl stop draws-manager.service This time systemctl status draws-manager.service displayed : active running but soon after it turns to active failed. Here is the complete bebug log. root@raspberrypi:/home/pi# systemctl status draws-manager ● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration. Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Tue 2020-02-18 22:17:04 CET; 19s ago Docs: https://github.com/nwdigitalradio/draws-manager Process: 2795 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE) Main PID: 2795 (code=exited, status=1/FAILURE) févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! errno 1 févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! webapp@0.0.0 start: `node ./bin/www` févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! Exit status 1 févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! Failed at the webapp@0.0.0 start script. févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! This is probably not a problem with npm. There is likely a févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! A complete log of this run can be found in: févr. 18 22:17:04 raspberrypi npm[2795]: npm ERR! /root/.npm/_logs/2020-02-18T21_17_04_429Z-debug.log févr. 18 22:17:04 raspberrypi systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/ févr. 18 22:17:04 raspberrypi systemd[1]: draws-manager.service: Failed with result 'exit-code'. root@raspberrypi:/home/pi# root@raspberrypi:/home/pi# root@raspberrypi:/home/pi# root@raspberrypi:/home/pi# root@raspberrypi:/home/pi# cat /root/.npm/_logs/2020-02-18T21_17_04_429Z-debug.log 0 info it worked if it ends with ok 1 warn npm npm does not support Node.js v10.15.2 2 warn npm You should probably upgrade to a newer version of node as we 3 warn npm can't make any promises that npm will work with this version. 4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9. 5 warn npm You can find the latest version at https://nodejs.org/ 6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ] 7 info using npm@5.8.0 8 info using node@... 9 verbose run-script [ 'prestart', 'start', 'poststart' ] 10 info lifecycle webapp@0.0.0~prestart: webapp@0.0.0 11 info lifecycle webapp@0.0.0~start: webapp@0.0.0 12 verbose lifecycle webapp@0.0.0~start: unsafe-perm in lifecycle true 13 verbose lifecycle webapp@0.0.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/usr/local/var/draws-manager/webapp/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin 14 verbose lifecycle webapp@0.0.0~start: CWD: /usr/local/var/draws-manager/webapp 15 silly lifecycle webapp@0.0.0~start: Args: [ '-c', 'node ./bin/www' ] 16 silly lifecycle webapp@0.0.0~start: Returned: code: 1 signal: null 17 info lifecycle webapp@0.0.0~start: Failed to exec start script 18 verbose stack Error: webapp@0.0.0 start: `node ./bin/www` 18 verbose stack Exit status 1 18 verbose stack at EventEmitter.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/index.js:283:16) 18 verbose stack at EventEmitter.emit (events.js:189:13) 18 verbose stack at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14) 18 verbose stack at ChildProcess.emit (events.js:189:13) 18 verbose stack at maybeClose (internal/child_process.js:970:16) 18 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) 19 verbose pkgid webapp@0.0.0 20 verbose cwd /usr/local/var/draws-manager/webapp 21 verbose Linux 4.19.97-v7l+ 22 verbose argv "/usr/bin/node" "/usr/bin/npm" "start" 23 verbose node v10.15.2 24 verbose npm v5.8.0 25 error code ELIFECYCLE 26 error errno 1 27 error webapp@0.0.0 start: `node ./bin/www` 27 error Exit status 1 28 error Failed at the webapp@0.0.0 start script. 28 error This is probably not a problem with npm. There is likely additional logging output above. 29 verbose exit [ 1, true ] As I do not need presently that Draws-manager I will not take your time and will wait for a fresh install when I get the opportunity or need to do so. Everything else is doing well presently. 73 de Bernard Thanks both for your help.
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC Basil Gunn #4499 I just burned and booted an nwdr15.img and draws-manager ran and worked in both remote & local browser without doing anything further. I then: cd cd n7nix git pull cd config ./bin_refresh.sh sudo su apt-get update apt-get dist-upgrade and after a reboot draws-manager again ran fine. If you did something other than the above or attempted to install draws-manager when it is already installed then that possibly could be your problem. /Basil n7nix Basil Gunn <basil@pacabunga.com> writes: toggle quoted messageShow quoted text I do not see it on my nwdr15.img installed system. draws-manager is installed & running by default on the nwdr15 image. Verify draws-manager running like this: systemctl status draws-manager.service Run like this on a remote computer: <ip-address-of-pi>:8080 or on a local RPi localhost:8080 /Basil n7nix
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC Basil Gunn #4498 I do not see it on my nwdr15.img installed system. draws-manager is installed & running by default on the nwdr15 image. Verify draws-manager running like this: systemctl status draws-manager.service Run like this on a remote computer: <ip-address-of-pi>:8080 or on a local RPi localhost:8080 /Basil n7nix
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC John D Hays - K7VE #4497 What does this return: ls -l /usr/local/var/draws-manager/webapp ls -l /usr/local/var/draws-manager/webapp/bin toggle quoted messageShow quoted text On Tue, Feb 18, 2020 at 10:40 AM f6bvp <f6bvp@...> wrote: Hi John, Thanks for the link. I followed instructions but could not log in to Draws-manager. Here ifollows a complete report. 73's Bernard systemctl status draws-manager ● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration. Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Tue 2020-02-18 19:30:08 CET; 5min ago Docs: https://github.com/nwdigitalradio/draws-manager Process: 11521 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE) Main PID: 11521 (code=exited, status=1/FAILURE) févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! errno 1 févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! webapp@0.0.0 start: `node ./bin/www` févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Exit status 1 févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Failed at the webapp@0.0.0 start script. févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! This is probably not a problem with npm. There is likely additional loggin févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! A complete log of this run can be found in: févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/FAILURE févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Failed with result 'exit-code'. root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log bash: /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log: Permission non accordée root@raspberrypi:/home/pi/draws-manager# cat /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log 0 info it worked if it ends with ok 1 warn npm npm does not support Node.js v10.15.2 2 warn npm You should probably upgrade to a newer version of node as we 3 warn npm can't make any promises that npm will work with this version. 4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9. 5 warn npm You can find the latest version at https://nodejs.org/ 6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ] 7 info using npm@5.8.0 8 info using node@... 9 verbose run-script [ 'prestart', 'start', 'poststart' ] 10 info lifecycle webapp@0.0.0~prestart: webapp@0.0.0 11 info lifecycle webapp@0.0.0~start: webapp@0.0.0 12 verbose lifecycle webapp@0.0.0~start: unsafe-perm in lifecycle true 13 verbose lifecycle webapp@0.0.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/usr/local/var/draws-manager/webapp/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin 14 verbose lifecycle webapp@0.0.0~start: CWD: /usr/local/var/draws-manager/webapp 15 silly lifecycle webapp@0.0.0~start: Args: [ '-c', 'node ./bin/www' ] 16 silly lifecycle webapp@0.0.0~start: Returned: code: 1 signal: null 17 info lifecycle webapp@0.0.0~start: Failed to exec start script 18 verbose stack Error: webapp@0.0.0 start: `node ./bin/www` 18 verbose stack Exit status 1 18 verbose stack at EventEmitter.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/index.js:283:16) 18 verbose stack at EventEmitter.emit (events.js:189:13) 18 verbose stack at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14) 18 verbose stack at ChildProcess.emit (events.js:189:13) 18 verbose stack at maybeClose (internal/child_process.js:970:16) 18 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) 19 verbose pkgid webapp@0.0.0 20 verbose cwd /usr/local/var/draws-manager/webapp 21 verbose Linux 4.19.93-v7l+ 22 verbose argv "/usr/bin/node" "/usr/bin/npm" "start" 23 verbose node v10.15.2 24 verbose npm v5.8.0 25 error code ELIFECYCLE 26 error errno 1 27 error webapp@0.0.0 start: `node ./bin/www` 27 error Exit status 1 28 error Failed at the webapp@0.0.0 start script. 28 error This is probably not a problem with npm. There is likely additional logging output above. 29 verbose exit [ 1, true ] root@raspberrypi:/home/pi/draws-manager# -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC Bernard f6bvp / ai7bg #4496 Hi John, Thanks for the link. I followed instructions but could not log in to Draws-manager. Here ifollows a complete report. 73's Bernard systemctl status draws-manager ● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration. Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Tue 2020-02-18 19:30:08 CET; 5min ago Docs: https://github.com/nwdigitalradio/draws-manager Process: 11521 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE) Main PID: 11521 (code=exited, status=1/FAILURE) févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! errno 1 févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! webapp@0.0.0 start: `node ./bin/www` févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Exit status 1 févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! Failed at the webapp@0.0.0 start script. févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! This is probably not a problem with npm. There is likely additional loggin févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! A complete log of this run can be found in: févr. 18 19:30:08 raspberrypi npm[11521]: npm ERR! /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/FAILURE févr. 18 19:30:08 raspberrypi systemd[1]: draws-manager.service: Failed with result 'exit-code'. root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log bash: /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log: Permission non accordée root@raspberrypi:/home/pi/draws-manager# cat /root/.npm/_logs/2020-02-18T18_30_08_039Z-debug.log 0 info it worked if it ends with ok 1 warn npm npm does not support Node.js v10.15.2 2 warn npm You should probably upgrade to a newer version of node as we 3 warn npm can't make any promises that npm will work with this version. 4 warn npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9. 5 warn npm You can find the latest version at https://nodejs.org/ 6 verbose cli [ '/usr/bin/node', '/usr/bin/npm', 'start' ] 7 info using npm@5.8.0 8 info using node@... 9 verbose run-script [ 'prestart', 'start', 'poststart' ] 10 info lifecycle webapp@0.0.0~prestart: webapp@0.0.0 11 info lifecycle webapp@0.0.0~start: webapp@0.0.0 12 verbose lifecycle webapp@0.0.0~start: unsafe-perm in lifecycle true 13 verbose lifecycle webapp@0.0.0~start: PATH: /usr/share/npm/node_modules/npm-lifecycle/node-gyp-bin:/usr/local/var/draws-manager/webapp/node_modules/.bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin 14 verbose lifecycle webapp@0.0.0~start: CWD: /usr/local/var/draws-manager/webapp 15 silly lifecycle webapp@0.0.0~start: Args: [ '-c', 'node ./bin/www' ] 16 silly lifecycle webapp@0.0.0~start: Returned: code: 1 signal: null 17 info lifecycle webapp@0.0.0~start: Failed to exec start script 18 verbose stack Error: webapp@0.0.0 start: `node ./bin/www` 18 verbose stack Exit status 1 18 verbose stack at EventEmitter.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/index.js:283:16) 18 verbose stack at EventEmitter.emit (events.js:189:13) 18 verbose stack at ChildProcess.<anonymous> (/usr/share/npm/node_modules/npm-lifecycle/lib/spawn.js:55:14) 18 verbose stack at ChildProcess.emit (events.js:189:13) 18 verbose stack at maybeClose (internal/child_process.js:970:16) 18 verbose stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) 19 verbose pkgid webapp@0.0.0 20 verbose cwd /usr/local/var/draws-manager/webapp 21 verbose Linux 4.19.93-v7l+ 22 verbose argv "/usr/bin/node" "/usr/bin/npm" "start" 23 verbose node v10.15.2 24 verbose npm v5.8.0 25 error code ELIFECYCLE 26 error errno 1 27 error webapp@0.0.0 start: `node ./bin/www` 27 error Exit status 1 28 error Failed at the webapp@0.0.0 start script. 28 error This is probably not a problem with npm. There is likely additional logging output above. 29 verbose exit [ 1, true ] root@raspberrypi:/home/pi/draws-manager#
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC John D Hays - K7VE #4495 Instructions and code at https://github.com/nwdigitalradio/draws-manager toggle quoted messageShow quoted text On Tue, Feb 18, 2020 at 10:05 AM f6bvp <f6bvp@...> wrote: Hi, Sorry but the video fails to explain how to install Draws-Manager and how to start it. I do not see it on my nwdr15.img installed system. Regards, Bernard, f6bvp -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC Bernard f6bvp / ai7bg #4494 Hi, Sorry but the video fails to explain how to install Draws-Manager and how to start it. I do not see it on my nwdr15.img installed system. Regards, Bernard, f6bvp
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC John McRae #4493 Thanks for the info about the youtube vid. I'll watch it soo9n, and work from that. cheers John 73, VK5PO On 18/02/2020 4:05 am, John D Hays - K7VE wrote: Have you watched https://www.youtube.com/watch?v=v5C3cWVVz_A This web tool handles settings, with out having to go into all of the controls of alsamixer. On Mon, Feb 17, 2020 at 7:51 AM John McRae <johnfmcrae.desktop@...> wrote: Hi everyone. Slowly working my way around the DRAWS/Rasp Pi... I would like to know the sound codex I/O information please. Seems a lot of options to choose from. That is for setting up JS8Call at this stage. Any Advice sincerely appreciated 73. John VK5PO -- John D. Hays Kingston, WA K7VE -- MY GMAIL desktop Email accoount, JF McRae, VK5PO/VK5SIX
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC John D Hays - K7VE #4492 Have you watched https://www.youtube.com/watch?v=v5C3cWVVz_A This web tool handles settings, with out having to go into all of the controls of alsamixer. toggle quoted messageShow quoted text On Mon, Feb 17, 2020 at 7:51 AM John McRae <johnfmcrae.desktop@...> wrote: Hi everyone. Slowly working my way around the DRAWS/Rasp Pi... I would like to know the sound codex I/O information please. Seems a lot of options to choose from. That is for setting up JS8Call at this stage. Any Advice sincerely appreciated 73. John VK5PO -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC John D Hays - K7VE #4491 This groups.io group is intended for this type of discussion. Feel free to ask your questions here. toggle quoted messageShow quoted text On Mon, Feb 17, 2020 at 7:51 AM John McRae <johnfmcrae.desktop@...> wrote: I have started A FB group with the aim of helping out / being helped fellow users of the DRAWS HAT, as I navigate my way through getting it all up and running. I have WSJT-X up on the screen, but need some guidance on what AUDIO SETTINGS are required. Many to choose from. Help please!!! John, VK5PO the FB page is; https://www.facebook.com/groups/2524564897653251/ -- John D. Hays Kingston, WA K7VE
More All Messages By This Member
Re: PRECIPITOUS EDUCATIONAL ARC Charles Blackburn <wx4cb@...> #4490 thanks for creating this. i'm still waiting for mine, hopefully they'll be shipped soon. i'm getting a little frustrated LOL charlie toggle quoted messageShow quoted text On 2/17/2020 2:28 AM, John McRae wrote: I have started A FB group with the aim of helping out / being helped fellow users of the DRAWS HAT, as I navigate my way through getting it all up and running. I have WSJT-X up on the screen, but need some guidance on what AUDIO SETTINGS are required. Many to choose from. Help please!!! John, VK5PO the FB page is; https://www.facebook.com/groups/2524564897653251/
More All Messages By This Member
PRECIPITOUS EDUCATIONAL ARC John McRae #4489 Hi everyone. Slowly working my way around the DRAWS/Rasp Pi... I would like to know the sound codex I/O information please. Seems a lot of options to choose from. That is for setting up JS8Call at this stage. Any Advice sincerely appreciated 73. John VK5PO
More All Messages By This Member

881 - 900 of 5368

Home Messages Hashtags Wiki About Features Pricing Updates Terms Help Twitter