Date   

Re: Download Issues

Basil Gunn
 

I concur with Mitch. I just downloaded the zipped image and it took
10min 18s at 4.73MB/s
I used my Linux workstation. It does depend on how many other
connections are in progress.

time wget http://nwdig.net/downloads/current_image.zip
--2019-10-01 11:11:19-- http://nwdig.net/downloads/current_image.zip
Resolving nwdig.net (nwdig.net)... 173.203.212.50
Connecting to nwdig.net (nwdig.net)|173.203.212.50|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2406078182 (2.2G) [application/zip]
Saving to: ‘current_image.zip’

current_image.zip 100%[==============================================================================>] 2.24G 4.73MB/s in 10m 18s

2019-10-01 11:21:37 (3.71 MB/s) - ‘current_image.zip’ saved
[2406078182/2406078182]

I'll announce the image possibly tomorrow as I am still testing some things
out.
/Basil


Mitch Winkle <ab4mw@...> writes:

I saw something similar when downloading it yesterday. On Win10 it was
abysmally slow. With the same connection on Linux it was it's normally
speedy self. The reader is left to his own conclusions.

On 9/30/19 6:13 PM, drjenks70@... wrote:
Hello,
Just received my board and when trying to download the image
from:Index of /downloads/ current_image.zip
<http://nwdig.net/downloads/current_image.zip>
I see minimal download speed and varying between 17 hours to 2
days left. I tried both Chrome and Edge and see basically same
results. I tested to my provider and see 90 Mbps download speeds
After 45 minutes I have received 39,493 KB of data, Is there an
issue with you access or Server causing this delay.. 2.2g should take
about 3 minutes to download. thanks Daryl


[New post] DRAWS™Case Update

 



k7udr posted: "Working thru delays in moving product in/out of China. Should have final prototypes this month. Hopefully production in November. Thanks for your patience, Bryan K7UDR"

New post on NW Digital Radio

DRAWSCase Update

by k7udr

Working thru delays in moving product in/out of China. Should have final prototypes this month. Hopefully production in November.

Thanks for your patience,
Bryan K7UDR

k7udr | October 1, 2019 at 8:00 am | Categories: DRAWS | URL: https://wp.me/p2mAAP-1NS


Trouble clicking? Copy and paste this URL into your browser:
http://nwdigitalradio.com/drawscase-update/




--


John D. Hays
Director

  


Re: Download Issues

Daryl Jenks
 

Thanks for responding.  the download finally finished after 17.5 hours.   I guess I will have to make a Pi Download machine for any future updates I need.    


Re: Download Issues

Mitch Winkle
 

I saw something similar when downloading it yesterday.  On Win10 it was abysmally slow.  With the same connection on Linux it was it's normally speedy self.  The reader is left to his own conclusions.

On 9/30/19 6:13 PM, drjenks70@... wrote:
Hello, 
    Just received my board and when trying to download the image from:Index of /downloads/  current_image.zip  
     I see minimal download speed and varying between 17 hours to 2 days left. I tried both Chrome and Edge and see basically same results.  I tested to my provider and see 90 Mbps download speeds  After 45 minutes  I have received 39,493 KB of data,  Is there an issue with you access or Server causing this delay.. 2.2g should take about 3 minutes to download.  thanks Daryl 
_._,_.


Re: Raspberry pi 3b+ crash after update/upgrade #draws #a25

Justin Clark (KJ7JC)
 

Thanks for the fast reply John!!

No, i had got the image on the 27th. I will etch this one here and see how it works. Thank you


Re: Raspberry pi 3b+ crash after update/upgrade #draws #a25

 

Did you get your new image from http://nwdig.net/downloads

On Mon, Sep 30, 2019 at 3:48 PM Justin Clark (KJ7JC) <jstnsclark@...> wrote:
I haven't used my draws in about 5 months. I started it up and did an update and then upgrade. Rebooted, now it won't reboot. I etched a new image and still get the same problem. I'm no expert on this, any help would be grea . Thanks. 



--
John D. Hays
Kingston, WA
K7VE

 


Raspberry pi 3b+ crash after update/upgrade #draws #a25

Justin Clark (KJ7JC)
 

I haven't used my draws in about 5 months. I started it up and did an update and then upgrade. Rebooted, now it won't reboot. I etched a new image and still get the same problem. I'm no expert on this, any help would be grea . Thanks. 


Download Issues

Daryl Jenks
 

Hello, 
    Just received my board and when trying to download the image from:Index of /downloads/  current_image.zip  
     I see minimal download speed and varying between 17 hours to 2 days left. I tried both Chrome and Edge and see basically same results.  I tested to my provider and see 90 Mbps download speeds  After 45 minutes  I have received 39,493 KB of data,  Is there an issue with you access or Server causing this delay.. 2.2g should take about 3 minutes to download.  thanks Daryl 


Re: DRAWS and Buster distro

Frank Ivan
 

Hi Guys,

I spent quite a bit of time on this because I, like Jonathan, have first run Draws hats which also require the dtoverlay= line.
I found the best place to put the new lines are the first non-commented lines in the /boot/Config.txt file.
If you want to make your own SD card, down load the latest Buster and then update it with sudo apt update sudo apt disc-upgrade.  Do not use rpi-update - that brings in a 64 bit experimental kernel that does not yet have the drivers you need.
After you get the system up to date, add the lines to the /boot/Config.txt - just make them the first non-comment lines and after a reboot (assuming the Draws card is installed), the aplay -l command should show the sound card.

Then you can download the n7nix file and run the config/image_install.sh.

If you want to skip all of that, you can download https://www.dropbox.com/s/i21qtsn7c9pwx19/Buster-Draws-2019-09-03.gz?dl=0 which links to a copy of Buster ready to go.  Just be sure to expand the disk when you first boot the Pi - sudo rasps-config or install gparted and use that.

73 - Frank - K0FEI


Re: DRAWS and Buster distro

Basil Gunn
 

f6bvp <f6bvp@...> writes:

Hi,
I finally installed last image nw14 and DRAWS driver is ok and aplay -l listed the device is present.

carte 1: udrc [udrc], périphérique 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0

I thought that Raspbian Busper would be ok but I was apparently wrong.
You are not wrong. The current version of Raspbian Buster has a kernel
with the required driver and will work fine with udrc/udrc II/DRAWS
hats.

You had some other problem that I was unable to determine from our
email exchange. The key is you need to have a current Raspbian kernel,
4.19.66-v7+ or newer and since you were not running a DRAWS hat you
needed to flush overlays before specifying a udrc overlay in /boot/config.txt.

dtoverlay=
dtoverlay=udrc
force_turbo=1

/Basil


Re: DRAWS and Buster distro

Bernard f6bvp / ai7bg
 

Hi,
I finally installed last image nw14 and DRAWS driver is ok and aplay -l listed the device is present.

**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: ALSA [bcm2835 ALSA], périphérique 0: bcm2835 ALSA [bcm2835 ALSA]
  Sous-périphériques: 7/7
  Sous-périphérique #0: subdevice #0
  Sous-périphérique #1: subdevice #1
  Sous-périphérique #2: subdevice #2
  Sous-périphérique #3: subdevice #3
  Sous-périphérique #4: subdevice #4
  Sous-périphérique #5: subdevice #5
  Sous-périphérique #6: subdevice #6
carte 0: ALSA [bcm2835 ALSA], périphérique 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: ALSA [bcm2835 ALSA], périphérique 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 1: udrc [udrc], périphérique 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
 

I thought that Raspbian Busper would be ok but I was apparently wrong.

Bernard


Re: Undulating transmit audio in HF programs #draws

krys weaver
 

after the 1st i'll take it i'm in 95240...k6rys

On Sun, Sep 29, 2019 at 10:28 AM Bryan Hoyer <bhhoyer@...> wrote:
Hi Mitch,

 It was buried in my office/house move.

You no doubt have one of the units with the cap/TX Audio problem.

I will fix and ship your unit tomorrow.

I’d like to hear more about your potential application once we get you up and running.

Thanks,
Bryan K7UDR

On Sep 29, 2019, at 8:24 AM, Mitch Winkle <ab4mw@...> wrote:

Some communication please.  It was sent many moons ago.

On 8/26/2019 09:20, Bryan Hoyer wrote:
Hi Mitch, I’ll check it out

Send it to:
NW Digital Radio
RMA<ordernumber>
150 Cessna Ave
Roche Harbor WA 98250

Thanks,
Bryan K7UDR

On Aug 26, 2019, at 5:54 AM, Mitch Winkle <ab4mw@...> wrote:

If no-one has any input I will package up my DRAWS for a return.  It's a might expensive GPS hat at this point.





--
Those who risk nothing—do nothing, achieve nothing, become nothing!
---------------------------------------------------------------------------------------
Only when tyrants cease making it home after work will this begin to change.
---------------------------------------------------------------------------------------
If you want to really survive just remember the more you know the less you need. 
Right now is the time to learn to the easy way.
---------------------------------------------------------------------------------------
“To learn who rules over you simply find out who you are not allowed to
criticize.”
"Hard to explain to someone who has no clue. It's a daily struggle being in pain or feeling sick on the inside while you look fine on the outside.
Movie "Control oil and you control nations; control food and you control the people." - Kissinger
---------------------------------------------------------------------------------------------------
The only things that government “makes” are criminals out of innocent people, and corpses out of living human beings.

PC [Political Correctness] is the verbal equivalent of burning books.
It is mind and thought control, pure and simple. — Gary Sepp
When all else fails. Amateur Radio is there.
---------------------------------------------------------------------
If the First Amendment fails, use the Second one.
a firm believer in the saying “Better tried by 12 than carried by 6”
I merely cite the old adage my grandfather advocated: Shoot, Shovel and Shut Up.
No matter how much you push the envelope, it'll still be stationary.
---------------------------------------------------------------------
earth turns to gold in the hands of the wise

- Rum
if the glove don't fit you must acquit

KEEP in Mind: De Light at de END of the Tunnel jus mite
beez's Muzzle ***FLASH***
-------------------------------------------------------------------
They will do it again if they see the need!!! You have been drinking
the right wing kool aid! The anti-ACLU flavor! Be care that you dont get Jamestowned!!
---------------------------------------------------------------------
Remember that old Tv Show Baretta?  “Don’t do the crime if you can’t do the time.”  (Don’t do it.)
---------------------------------------------------------------------
WARNING: Due to Presidential Executive Orders, the National Security Agency (NSA) may have read this email without warning, warrant, or notice. They may do this without any judicial or legislative oversight. You have no recourse, nor protection.......... IF anyone other than the addressee of this e-mail is reading it, you are in violation of the 1st & 4th Amendments to the Constitution of the United States.
--------------------------------------------------------------------


Re: Draws Hat for sale

 

Fabien,

You probably have one of the recall units with the cap problem.

Return it for rework or refund, your choice.

Thanks,
Bryan K7UDR


Re: Undulating transmit audio in HF programs #draws

 

Hi Mitch,

 It was buried in my office/house move.

You no doubt have one of the units with the cap/TX Audio problem.

I will fix and ship your unit tomorrow.

I’d like to hear more about your potential application once we get you up and running.

Thanks,
Bryan K7UDR

On Sep 29, 2019, at 8:24 AM, Mitch Winkle <ab4mw@...> wrote:

Some communication please.  It was sent many moons ago.

On 8/26/2019 09:20, Bryan Hoyer wrote:
Hi Mitch, I’ll check it out

Send it to:
NW Digital Radio
RMA<ordernumber>
150 Cessna Ave
Roche Harbor WA 98250

Thanks,
Bryan K7UDR

On Aug 26, 2019, at 5:54 AM, Mitch Winkle <ab4mw@...> wrote:

If no-one has any input I will package up my DRAWS for a return.  It's a might expensive GPS hat at this point.




Re: Undulating transmit audio in HF programs #draws

Mitch Winkle
 

Some communication please.  It was sent many moons ago.

On 8/26/2019 09:20, Bryan Hoyer wrote:
Hi Mitch, I’ll check it out

Send it to:
NW Digital Radio
RMA<ordernumber>
150 Cessna Ave
Roche Harbor WA 98250

Thanks,
Bryan K7UDR

On Aug 26, 2019, at 5:54 AM, Mitch Winkle <ab4mw@...> wrote:

If no-one has any input I will package up my DRAWS for a return.  It's a might expensive GPS hat at this point.



Draws Hat for sale

Fabien, F4IDL
 

Hello,

I made a mistake, this is not made for me, I can't get anything to work with it, it's not made for me so I'm selling it.

120€ with shipping.

Just let me know if you're interested.


Re: DRAWS and Buster distro

Bernard Pidoux
 

Hi Basil,
I would like to try new RPi image.as you suggested.
Where can I download it from ?

Bernard


Re: Draws image

Cowan Bowman
 

I've always had great results with Rufus.

Cowan N5QDH


Re: Draws image

Cowan Bowman
 

Rufus works very well on windows 10 to create bootable image on the SD card.


Cowan
N5QDH

On Sat, Sep 28, 2019 at 7:02 AM rhclinton <rhclinton@...> wrote:
The problem is an incompatibility between Etcher and Windows 10.  Reference to the Etcher forum revealed that a number of others had suffered the same problem (not in relation to Draws).  I rescusitated a Windows 8.1 machine and installed Etcher and was able to flash the SD with the Draws image.  It booted correctly in a RPi 3.  I tried three diffeent Win10 machines and had the same problem.  All three were running Bitdefender but turning off the Bitdefender firewall and other services that are often implicated in blocked applications had no effect in this case.  One of the posts on the Etcher forum indicated a suspicion of Windows Defender, so perhaps it is related to virus/firewall software.

One of the posts by an Etcher support guy said something to the effect that they were "looking into a mitigation", but that was quite some time ago.  The message is, then, that if you want to flash images to an SD on a Windows machine, then hang on to a pre-Win10 machine.

Bob  G0BUX


Re: DRAWS and Buster distro

Basil Gunn
 

As suggested I moved driver lines to [all] section.
However this did not help.
Later on today look for a new RPi image that should fix your problem.
However adding those 3 lines to the bottom of the latest Raspbian images
should work. I don't have enough visibility into your system to
understand why it doesn't.

I performed a RaspBerry Pi firmware + kernel update using rpi-update
upgrading to kernel is 4.19.75-v7+
Since the kernel you get from doing this is bleeding edge I have not
tested it and do NOT support it. For others reading this post please do
NOT run rpi-update as that will install an unsupported kernel.

Interestingly there are now two errors messages displayed when running show-udrc.sh

chk1: snd-soc-tlv320aic32x4-i2c.ko exists, Driver CONFLICT
chk2: snd-soc-tlv320aic32x4.ko exists, Driver CONFLICT
You are seeing these messages because that script you are running hasn't
been updated for compatibility with Linux buster. If you update the
scripts from my repository you will get a version that handles buster
properly.

cd
cd n7nix
git pull

/Basil