1. udrc@nw-digital-radio.groups.io
   Date   
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Jonathan Visser
 

Frank, 

I am using the card with the GPS antenna on what I would consider the back.  The GPS antenna antenna is on the same side as the power. 

Thanks, 
Jonathan

On Aug 29, 2019, at 10:40 AM, Frank Ivan via Groups.Io <k0fei@...> wrote:

Hi Jonathan,

Are you using the hat with the gps antenna on the side with the sockets or on the back of the card?

Thanks
Frank - K0FEI

Re: Eureka!!!! She works perfectly!!

John D Hays - K7VE
 


On Thu, Aug 29, 2019 at 8:55 AM Michael Narges <mnarges23@...> wrote:
I read several posts here about the need to remove pin six.  John Hays and Bryan Hoyer particularly seemed to have solid reasons, and I merely took their helpful advice.  The Draws Hat is essentially a “black box” since there are no schematics published. However nothing succeeds like success!  Hope this trick works for you!

73. Mike Wf8o 



--
John D. Hays
Kingston, WA
K7VE

 
Re: Eureka!!!! She works perfectly!!

Michael Narges
 

I read several posts here about the need to remove pin six.  John Hays and Bryan Hoyer particularly seemed to have solid reasons, and I merely took their helpful advice.  The Draws Hat is essentially a “black box” since there are no schematics published. However nothing succeeds like success!  Hope this trick works for you!

73. Mike Wf8o 
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

John D Hays - K7VE
 

Stretch is the best path for Pi 3 and Pi 2.  If you have a Pi 4, you will need to use Buster and the edit that Basil lists.

Now that the DRAWS™ support is directly in the Buster kernel, it is configuration to activate it.

We may put out some images specific to some application groupings on top of Buster with DRAWS™, but they will start on top of Buster.

Pi 4 is still leading edge at this point.

On Thu, Aug 29, 2019 at 7:36 AM Basil Gunn <basil@...> wrote:

Mitch Winkle <ab4mw@...> writes:

> Second that notion. There is a lot of what I consider unwanted fluff
> in this image since I don't care about packet radio. I would really
> like to have a clean image with only the necessary drivers and such and
> then I could install my own programs, and select the HF programs that I
> want to use. So perhaps a "minimal" image that gets the DRAWS
> functioning properly on the RPi??

Use the latest Raspbian image that supports Debian buster and add these
lines in /boot/config.txt

dtoverlay=draws,alsaname=udrc
force_turbo=1

/Basil n7nix





--
John D. Hays
Kingston, WA
K7VE

 
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

John D Hays - K7VE
 

I have had both recognized with the Buster version.

On Thu, Aug 29, 2019 at 8:41 AM Frank Ivan via Groups.Io <k0fei=me.com@groups.io> wrote:
Hi Jonathan,

Are you using the hat with the gps antenna on the side with the sockets or on the back of the card?

Thanks
Frank - K0FEI
_._,_._,_

--
John D. Hays
Kingston, WA
K7VE

 
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Frank Ivan
 

Hi Jonathan,

Are you using the hat with the gps antenna on the side with the sockets or on the back of the card?

Thanks
Frank - K0FEI
Re: no transmit #wsjt-x

Mitch Winkle
 

FT-450D

On 8/29/19 9:39 AM, John D Hays - K7VE wrote:
What radio model are you trying to drive?

On Thu, Aug 29, 2019, 04:34 Mitch Winkle <ab4mw@...> wrote:

sounds very much like my issue, only I have badly distored audio to the transmitter.  mine is in a box ready to be mailed back for eval.

On 8/28/19 10:08 PM, Rob Lapham wrote:
I did use Johns web app and it came up with the same values as the draws manager. I have turned  the gain up all the way and no clean tone.
the radio works fine with my other rp4 and a signal link so I think the radio is ok. also install another cable still no clean audio.
I lost
Rob k6jus

Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Basil Gunn
 

Mitch Winkle <ab4mw@radcommsoft.com> writes:

Second that notion. There is a lot of what I consider unwanted fluff
in this image since I don't care about packet radio. I would really
like to have a clean image with only the necessary drivers and such and
then I could install my own programs, and select the HF programs that I
want to use. So perhaps a "minimal" image that gets the DRAWS
functioning properly on the RPi??
Use the latest Raspbian image that supports Debian buster and add these
lines in /boot/config.txt

dtoverlay=draws,alsaname=udrc
force_turbo=1

/Basil n7nix
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Basil Gunn
 

There is no upgrade path from draws_image13 which uses Debian stretch to
the latest Raspbian distribution which uses Debian buster.

This is because the transition of the DRAWS driver support to be in a
native Linux kernel. If you use a Raspbian image & add these lines at
bottom of your /boot/config.txt file:

dtoverlay=draws,alsaname=udrc
force_turbo=1

DRAWS drivers will be running & your DRAWS hat will be recognized.

There is no upgrade path from draws_image13 which uses Debian stretch to
the latest Raspbian distribution which used Debian buster.

There will be a new image posted sometime after the Pacific Northwest
Summer Gathering in the last part of September. In the mean time either
use draws_image13 and don't do an upgrade or use the latest Raspbian
image.

/Basil n7nix


Jonathan Visser via Groups.Io <n9tjx=yahoo.com@groups.io> writes:

I was able to successfully see the sound card when completing the steps that Mr. Hays gave. The issue I have is going onto the n7nix scripts. After running the ./app_config.sh core, I no longer see the UDRC sound card. This was discovered late last night and I have not had a chance to troubleshoot these issues. For those
having issues did you continue run that script before testing the sound card? I will try to troubleshoot soon and open a separate thread for the issues with the n7nix config script.

My steps I used.

1 Downloaded Buster 2019-07-10-raspbian-buster.img
2 Used Etcher on MAC to flash image to a SanDisk 32G Card
3 Booted SD in Raspberry Pi 3B+ DRAWS (received July 2019) hat installed - Power through 12V DRAWS hat
4 Boot resized file system and entered United States - and Chicago Time then set password and then selected WiFi.
5 enable ssh - to be able to cut and paste commands.
6 Changed Hostname (N9TJX-Draws)
7 Rebooted.
8 sudo apt update -
9 sudo apt upgrade.
10 Rebooted.
11 sudo apt install git build-essential vim and nmap (- git and build-essential were up to date installed vim and nmap)
12 git clone https://github.com/nwdigitalradio/n7nix.git
13 cd n7nix/config
14 sudo ./image_install.sh
15 sudo apt --fix-broken install
16 reboot - Current Location
17 cd n7nix/bin
18 ./sndcard.sh -

* udrc card number line: card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
* udrc is sound card #1

* aplay -l

* **** List of PLAYBACK Hardware Devices ****
* card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
* Subdevices: 7/7
* Subdevice #0: subdevice #0
* Subdevice #1: subdevice #1
* Subdevice #2: subdevice #2
* Subdevice #3: subdevice #3
* Subdevice #4: subdevice #4
* Subdevice #5: subdevice #5
* Subdevice #6: subdevice #6
* card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
* Subdevices: 1/1
* Subdevice #0: subdevice #0
* card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
* Subdevices: 1/1
* Subdevice #0: subdevice #0
* card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
* Subdevices: 1/1
* Subdevice #0: subdevice #0

* pi@N9TJX-Draws:~/n7nix/bin $ ./showudrc.sh
==== Sound Card ====
udrc card number line: card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
udrc is sound card #1
==== ALSA Controls for Radio Tansmit ====
LO Driver Gain L:[0.00dB] R:[0.00dB]
PCM L:[-20.00dB] R:[-20.00dB]
DAC Playback PT L:[P3] R:[P3]
LO Playback CM [Full Chip]
==== ALSA Controls for Radio Receive ====
ADC Level L:[0.00dB] R:[0.00dB]
IN1 L:[Off] R:[Off]
IN2 L:[Off] R:[Off]
==== Pi Ver ====
Pi 3 Model B+ Mfg by Sony UK
Has WiFi
==== udrc Ver ====
Found a DRAWS

HAT ID EEPROM
Name: hat
Product: Digital Radio Amateur Work Station
Product ID: 0x0004
Product ver: 0x0106
UUID: 5a56f3f8-8633-40e2-b6d6-7961de41e7f5
Vendor: NW Digital Radio

==== sys Ver ====
----- image version
2019 08 28 21:11:46 CDT: image_install.sh: image install script START
----- /proc/version
Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019

----- /etc/*version: 10.0

----- /etc/*release
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/";
SUPPORT_URL="http://www.raspbian.org/RaspbianForums";
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs";

----- lsb_release
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 10 (buster)
Release: 10
Codename: buster

---- systemd
Static hostname: N9TJX-Draws
Icon name: computer
Machine ID: 4b759e4c7f8047a8b474e800d1ab08a0
Boot ID: acd9bb3830084b90a194a153cc6e5ecf
Operating System: Raspbian GNU/Linux 10 (buster)
Kernel: Linux 4.19.66-v7+
Architecture: arm

---- modules
snd_soc_tlv320aic32x4_i2c 16384 9
snd_soc_tlv320aic32x4 40960 1 snd_soc_tlv320aic32x4_i2c
snd_soc_core 192512 4 snd_soc_simple_card_utils,snd_soc_bcm2835_i2s,snd_soc_tlv320aic32x4,snd_soc_simple_card
snd_pcm 102400 5 snd_pcm_dmaengine,snd_soc_bcm2835_i2s,snd_soc_tlv320aic32x4,snd_bcm2835,snd_soc_core
snd 73728 12 snd_compress,snd_timer,snd_soc_tlv320aic32x4,snd_bcm2835,snd_soc_core,snd_pcm

Command 'apt-get install udrc-dkms' failed or was not run.

---- kernel
dpkg-query: no packages found matching udrc-dkms
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==================-============-============-=================================
ii raspberrypi-kernel 1.20190819-1 armhf Raspberry Pi bootloader

Directory: /proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 exists and status is okay

---- syslog

---- dmesg

---- compass
Compass preference file not found: /etc/apt/preferences.d/compass
Compass apt sources list file not found: /etc/apt/sources.list.d/compass.list
---- compass package files
ls: cannot access '/var/lib/apt/lists/archive.compasslinux.org_*': No such file or directory

----- Dire Wolf DEVELOPMENT version 1.6 C (Aug 28 2019)

==== Filesystem ====
/dev/root 29G 3.5G 25G 13% /

==== boot config ====

[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
max_framebuffers=2

[all]
#dtoverlay=vc4-fkms-v3d

# enable udrc/draws if no eeprom
dtoverlay=draws,alsaname=udrc
force_turbo=1

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

---- gpsd
/usr/local/sbin/gpsd
gpsd: 3.19 (revision 3.19)
● gpsd.service - GPS (Global Positioning System) Daemon
Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2019-08-28 21:54:19 CDT; 9h ago
Process: 516 ExecStart=/usr/local/sbin/gpsd $GPSD_OPTIONS $OPTIONS $DEVICES (code=exited, status=0/SUCCESS)
Main PID: 527 (gpsd)
Tasks: 3 (limit: 2200)
Memory: 1.2M
CGroup: /system.slice/gpsd.service
└─527 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0

Aug 28 21:54:19 N9TJX-Draws systemd[1]: Starting GPS (Global Positioning Sy…n...
Aug 28 21:54:19 N9TJX-Draws systemd[1]: Started GPS (Global Positioning Sys…mon.
Hint: Some lines were ellipsized, use -l to show in full.

---- chrony
crw-rw---- 1 root root 241, 0 Aug 28 21:54 /dev/pps0
crw------- 1 root root 241, 1 Aug 28 21:54 /dev/pps1
crw-rw---- 1 root dialout 239, 0 Aug 28 21:54 /dev/ttySC0
crw-rw---- 1 root dialout 239, 1 Aug 28 21:54 /dev/ttySC1
-- chrony sources
210 Number of sources = 6
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
#? GPS 0 3 0 - +0ns[ +0ns] +/- 0ns
#? PPS 0 3 0 - +0ns[ +0ns] +/- 0ns
^+ 159.203.158.197 2 10 377 35m -2762us[-2744us] +/- 58ms
^- satellite.gensonline.eu 2 10 377 781 -2266us[-2236us] +/- 94ms
^- vps6.ctyme.com 2 9 377 236 +7359us[+7359us] +/- 52ms
^* tara.castrovalva.org 2 10 377 584 +2140us[+2171us] +/- 31ms
-- chrony tracking
Reference ID : 2D4F0DCE (tara.castrovalva.org)
Stratum : 3
Ref time (UTC) : Thu Aug 29 12:04:19 2019
System time : 0.000001521 seconds slow of NTP time
Last offset : +0.000030475 seconds
RMS offset : 0.000163167 seconds
Frequency : 2.914 ppm slow
Residual freq : +0.000 ppm
Skew : 0.038 ppm
Root delay : 0.052745562 seconds
Root dispersion : 0.003564177 seconds
Update interval : 1038.6 seconds
Leap status : Normal
-- chrony sourcestats
210 Number of sources = 6
Name/IP Address NP NR Span Frequency Freq Skew Offset Std Dev
==============================================================================
GPS 0 0 0 +0.000 2000.000 +0ns 4000ms
PPS 0 0 0 +0.000 2000.000 +0ns 4000ms
159.203.158.197 55 24 523m -0.012 0.046 -2390us 973us
satellite.gensonline.eu 8 5 121m -0.055 0.571 -1448us 622us
vps6.ctyme.com 7 6 60m +0.864 3.569 +1530us 928us
tara.castrovalva.org 54 27 549m +0.023 0.064 +1736us 1326us

---- sensors
-rw-r--r-- 1 root root 171 Aug 28 21:22 /etc/sensors.d/draws
rpi_volt-isa-0000
Adapter: ISA adapter
in0: N/A

ads1015-i2c-1-48
Adapter: bcm2835 I2C adapter
+12V: +13.60 V
in5: +2.54 V
User ADC 1: +0.00 V
User ADC 2: +0.00 V

---- throttle
throttled=0x0
---- locale
Locale country codes consistent among WiFi cfg file, iw reg & X11: US
core_config.sh has been run 0 time(s)

* Draws manager

* This installed without any issues.

* cd n7nix/config
* sudo su
* ./app_config.sh core
* reboot

* At this point I cannot see the sound card.
* I have not had a chance to see diagnose this, as I found this late last night. It took me a little while to figure out that for me the issue is running the "./app_config.sh core” command
*

73’s
Jonathan N9TJX

On Aug 29, 2019, at 6:37 AM, Mitch Winkle <ab4mw@radcommsoft.com> wrote:

Second that notion. There is a lot of what I consider unwanted fluff in this image since I don't care about packet radio. I would really like to have a clean image with only the necessary drivers and such and then I could install my own programs, and select the HF programs that I want to use. So perhaps a "minimal" image
that gets the DRAWS functioning properly on the RPi??

On 8/29/19 2:44 AM, Jonathan Magee wrote:

Hi Mike,
I can confirm that I am powering it via the 12 volt plug. When you write up your clean install, please could you specify which version of the buster image you use....
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Basil Gunn
 

Edouard Lafargue <ed@wizkers.io> writes:

Why not just simply release a Debian "draws.deb" package that enables
the DRAWS ? This is the standard way to do that sort of stuff on
Debian/Raspbian and would avoid having to create full image instead of
using the official Raspbian distribution...
In the latest kernels supported by Raspbian (4.19.58) DRAWS hat required
drivers are in the main stream Linux kernel. You still need to load the
overlay in /boot/config.txt but other than that, thanks to Anna, DRAWS
is supported in the latest Linux kernel.

As far as the DRAWS boot images are concerned they were provided as a
convenience to provide a distribution that supports A LOT of commonly
used amateur radio Linux software. It would be nice if all those
programs were Debian packages but someone would have to step up & do
that work.

/Basil n7nix
Re: Eureka!!!! She works perfectly!!

Bryan Hoyer
 

SQL or COR is normally an open collator output from the Radio. Yaesu changed it to an I/O on some models. TNC Cable makers and some TNCs ship with cables that have pin 6 removed for this reason.

Bryan K7UDR

On Aug 28, 2019, at 7:56 PM, Bill Vodall <wa7nwp@gmail.com> wrote:

Is this carefully explained somewhere? It seems a bit weird to have
to pull a pin from a data cable. (Or is it like the rPI 4 charging
cables...)


I removed pin six on one end of the mini 6 Din cable and the lost audio returned .. (on the FT 817)
Bill
Re: no transmit #wsjt-x

John D Hays - K7VE
 

What radio model are you trying to drive?


On Thu, Aug 29, 2019, 04:34 Mitch Winkle <ab4mw@...> wrote:

sounds very much like my issue, only I have badly distored audio to the transmitter.  mine is in a box ready to be mailed back for eval.

On 8/28/19 10:08 PM, Rob Lapham wrote:
I did use Johns web app and it came up with the same values as the draws manager. I have turned  the gain up all the way and no clean tone.
the radio works fine with my other rp4 and a signal link so I think the radio is ok. also install another cable still no clean audio.
I lost
Rob k6jus

Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Jonathan Visser
 

I was able to successfully see the sound card when completing the steps that Mr. Hays gave.  The issue I have is going onto the n7nix scripts.  After running the ./app_config.sh core, I no longer see the UDRC sound card.  This was discovered late last night and I have not had a chance to troubleshoot these issues.  For those having issues did you continue run that script before testing the sound card? I will try to troubleshoot soon and open a separate thread for the issues with the n7nix config script.  

My steps I used.  
  1. Downloaded Buster 2019-07-10-raspbian-buster.img
  2. Used Etcher on MAC to flash image to a SanDisk 32G Card
  3. Booted SD in Raspberry Pi 3B+ DRAWS (received July 2019) hat installed - Power through 12V DRAWS hat
  4. Boot resized file system and entered United States - and Chicago Time then set password and then selected WiFi.
  5. enable ssh  - to be able to cut and paste commands.
  6. Changed Hostname (N9TJX-Draws)
  7. Rebooted.
  8. sudo apt update - 
  9. sudo apt upgrade.
  10. Rebooted.
  11. sudo apt install git build-essential vim and nmap  (- git and build-essential were up to date installed vim and nmap)
  12. git clone https://github.com/nwdigitalradio/n7nix.git
  13. cd n7nix/config
  14. sudo ./image_install.sh
  15. sudo apt --fix-broken install
  16. reboot - Current Location
  17. cd n7nix/bin
  18. ./sndcard.sh - 
    • udrc card number line: card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
    • udrc is sound card #1
  19. aplay -l
    • **** List of PLAYBACK Hardware Devices ****
    • card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
    •   Subdevices: 7/7
    •   Subdevice #0: subdevice #0
    •   Subdevice #1: subdevice #1
    •   Subdevice #2: subdevice #2
    •   Subdevice #3: subdevice #3
    •   Subdevice #4: subdevice #4
    •   Subdevice #5: subdevice #5
    •   Subdevice #6: subdevice #6
    • card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
    •   Subdevices: 1/1
    •   Subdevice #0: subdevice #0
    • card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
    •   Subdevices: 1/1
    •   Subdevice #0: subdevice #0
    • card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
    •   Subdevices: 1/1
    •   Subdevice #0: subdevice #0
  20. pi@N9TJX-Draws:~/n7nix/bin $ ./showudrc.sh
    ==== Sound Card ====
    udrc card number line: card 1: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4-hifi-0 []
    udrc is sound card #1
    ==== ALSA Controls for Radio Tansmit ====
    LO Driver Gain  L:[0.00dB] R:[0.00dB]
    PCM         L:[-20.00dB] R:[-20.00dB]
    DAC Playback PT L:[P3] R:[P3]
    LO Playback CM [Full Chip]
    ==== ALSA Controls for Radio Receive ====
    ADC Level L:[0.00dB] R:[0.00dB]
    IN1 L:[Off] R:[Off]
    IN2 L:[Off] R:[Off]
    ==== Pi Ver ====
     Pi 3 Model B+ Mfg by Sony UK
     Has WiFi
    ==== udrc Ver ====
    Found a DRAWS

         HAT ID EEPROM
    Name:        hat
    Product:     Digital Radio Amateur Work Station
    Product ID:  0x0004
    Product ver: 0x0106
    UUID:        5a56f3f8-8633-40e2-b6d6-7961de41e7f5
    Vendor:      NW Digital Radio

    ==== sys Ver ====
    ----- image version
    2019 08 28 21:11:46 CDT: image_install.sh: image install script START
    ----- /proc/version
    Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019

    ----- /etc/*version: 10.0

    ----- /etc/*release
    PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
    NAME="Raspbian GNU/Linux"
    VERSION_ID="10"
    VERSION="10 (buster)"
    VERSION_CODENAME=buster
    ID=raspbian
    ID_LIKE=debian

    ----- lsb_release
    No LSB modules are available.
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 10 (buster)
    Release: 10
    Codename: buster

    ---- systemd
       Static hostname: N9TJX-Draws
             Icon name: computer
            Machine ID: 4b759e4c7f8047a8b474e800d1ab08a0
               Boot ID: acd9bb3830084b90a194a153cc6e5ecf
      Operating System: Raspbian GNU/Linux 10 (buster)
                Kernel: Linux 4.19.66-v7+
          Architecture: arm

    ---- modules
    snd_soc_tlv320aic32x4_i2c    16384  9
    snd_soc_tlv320aic32x4    40960  1 snd_soc_tlv320aic32x4_i2c
    snd_soc_core          192512  4 snd_soc_simple_card_utils,snd_soc_bcm2835_i2s,snd_soc_tlv320aic32x4,snd_soc_simple_card
    snd_pcm               102400  5 snd_pcm_dmaengine,snd_soc_bcm2835_i2s,snd_soc_tlv320aic32x4,snd_bcm2835,snd_soc_core
    snd                    73728  12 snd_compress,snd_timer,snd_soc_tlv320aic32x4,snd_bcm2835,snd_soc_core,snd_pcm

    Command 'apt-get install udrc-dkms' failed or was not run.

    ---- kernel
    dpkg-query: no packages found matching udrc-dkms
    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
    ||/ Name               Version      Architecture Description
    +++-==================-============-============-=================================
    ii  raspberrypi-kernel 1.20190819-1 armhf        Raspberry Pi bootloader

    Directory: /proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 exists and status is okay

    ---- syslog

    ---- dmesg

    ---- compass
    Compass preference file not found: /etc/apt/preferences.d/compass
    Compass apt sources list file not found: /etc/apt/sources.list.d/compass.list
    ---- compass package files
    ls: cannot access '/var/lib/apt/lists/archive.compasslinux.org_*': No such file or directory

    ----- Dire Wolf DEVELOPMENT version 1.6 C (Aug 28 2019)

    ==== Filesystem ====
    /dev/root        29G  3.5G   25G  13% /

    ==== boot config ====

    [pi4]
    # Enable DRM VC4 V3D driver on top of the dispmanx display stack
    dtoverlay=vc4-fkms-v3d
    max_framebuffers=2

    [all]
    #dtoverlay=vc4-fkms-v3d

    # enable udrc/draws if no eeprom
    dtoverlay=draws,alsaname=udrc
    force_turbo=1

    # Enable audio (loads snd_bcm2835)
    dtparam=audio=on

    ---- gpsd
    /usr/local/sbin/gpsd
    gpsd: 3.19 (revision 3.19)
    ● gpsd.service - GPS (Global Positioning System) Daemon
       Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: enabled)
       Active: active (running) since Wed 2019-08-28 21:54:19 CDT; 9h ago
      Process: 516 ExecStart=/usr/local/sbin/gpsd $GPSD_OPTIONS $OPTIONS $DEVICES (code=exited, status=0/SUCCESS)
     Main PID: 527 (gpsd)
        Tasks: 3 (limit: 2200)
       Memory: 1.2M
       CGroup: /system.slice/gpsd.service
               └─527 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0

    Aug 28 21:54:19 N9TJX-Draws systemd[1]: Starting GPS (Global Positioning Sy…n...
    Aug 28 21:54:19 N9TJX-Draws systemd[1]: Started GPS (Global Positioning Sys…mon.
    Hint: Some lines were ellipsized, use -l to show in full.

    ---- chrony
    crw-rw---- 1 root root    241, 0 Aug 28 21:54 /dev/pps0
    crw------- 1 root root    241, 1 Aug 28 21:54 /dev/pps1
    crw-rw---- 1 root dialout 239, 0 Aug 28 21:54 /dev/ttySC0
    crw-rw---- 1 root dialout 239, 1 Aug 28 21:54 /dev/ttySC1
    -- chrony sources
    210 Number of sources = 6
    MS Name/IP address         Stratum Poll Reach LastRx Last sample               
    ===============================================================================
    #? GPS                           0   3     0     -     +0ns[   +0ns] +/-    0ns
    #? PPS                           0   3     0     -     +0ns[   +0ns] +/-    0ns
    ^+ 159.203.158.197               2  10   377   35m  -2762us[-2744us] +/-   58ms
    ^- satellite.gensonline.eu       2  10   377   781  -2266us[-2236us] +/-   94ms
    ^- vps6.ctyme.com                2   9   377   236  +7359us[+7359us] +/-   52ms
    ^* tara.castrovalva.org          2  10   377   584  +2140us[+2171us] +/-   31ms
    -- chrony tracking
    Reference ID    : 2D4F0DCE (tara.castrovalva.org)
    Stratum         : 3
    Ref time (UTC)  : Thu Aug 29 12:04:19 2019
    System time     : 0.000001521 seconds slow of NTP time
    Last offset     : +0.000030475 seconds
    RMS offset      : 0.000163167 seconds
    Frequency       : 2.914 ppm slow
    Residual freq   : +0.000 ppm
    Skew            : 0.038 ppm
    Root delay      : 0.052745562 seconds
    Root dispersion : 0.003564177 seconds
    Update interval : 1038.6 seconds
    Leap status     : Normal
    -- chrony sourcestats
    210 Number of sources = 6
    Name/IP Address            NP  NR  Span  Frequency  Freq Skew  Offset  Std Dev
    ==============================================================================
    GPS                         0   0     0     +0.000   2000.000     +0ns  4000ms
    PPS                         0   0     0     +0.000   2000.000     +0ns  4000ms
    159.203.158.197            55  24  523m     -0.012      0.046  -2390us   973us
    satellite.gensonline.eu     8   5  121m     -0.055      0.571  -1448us   622us
    vps6.ctyme.com              7   6   60m     +0.864      3.569  +1530us   928us
    tara.castrovalva.org       54  27  549m     +0.023      0.064  +1736us  1326us

    ---- sensors
    -rw-r--r-- 1 root root 171 Aug 28 21:22 /etc/sensors.d/draws
    rpi_volt-isa-0000
    Adapter: ISA adapter
    in0:              N/A  

    ads1015-i2c-1-48
    Adapter: bcm2835 I2C adapter
    +12V:        +13.60 V  
    in5:          +2.54 V  
    User ADC 1:   +0.00 V  
    User ADC 2:   +0.00 V  


    ---- throttle
    throttled=0x0
    ---- locale
    Locale country codes consistent among WiFi cfg file, iw reg & X11: US
    core_config.sh has been run 0 time(s)
  21. Draws manager
    • This installed without any issues.
  22. cd n7nix/config
  23. sudo su
  24. ./app_config.sh core 
  25. reboot
    • At this point I cannot see the sound card.  
    • I have not had a chance to see diagnose this, as I found this late last night.  It took me a little while to figure out that for me the issue is running the "./app_config.sh core” command

73’s 
Jonathan N9TJX


On Aug 29, 2019, at 6:37 AM, Mitch Winkle <ab4mw@...> wrote:

Second that notion.  There is  a lot of what I consider unwanted fluff in this image since I don't care about packet radio.  I would really like to have a clean image with only the necessary drivers and such and then I could install my own programs, and select the HF programs that I want to use.  So perhaps a "minimal" image that gets the DRAWS functioning properly on the RPi??

On 8/29/19 2:44 AM, Jonathan Magee wrote:
Hi Mike,
I can confirm that I am powering it via the 12 volt plug. When you write up your clean install, please could you specify which version of the buster image you use....
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Edouard Lafargue
 

  Why not just simply release a Debian "draws.deb" package that enables the DRAWS ? This is the standard way to do that sort of stuff on Debian/Raspbian and would avoid having to create full image instead of using the official Raspbian distribution...

Ed
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Mitch Winkle
 

Second that notion.  There is  a lot of what I consider unwanted fluff in this image since I don't care about packet radio.  I would really like to have a clean image with only the necessary drivers and such and then I could install my own programs, and select the HF programs that I want to use.  So perhaps a "minimal" image that gets the DRAWS functioning properly on the RPi??

On 8/29/19 2:44 AM, Jonathan Magee wrote:
Hi Mike,
I can confirm that I am powering it via the 12 volt plug. When you write up your clean install, please could you specify which version of the buster image you use....
Re: no transmit #wsjt-x

Mitch Winkle
 

sounds very much like my issue, only I have badly distored audio to the transmitter.  mine is in a box ready to be mailed back for eval.

On 8/28/19 10:08 PM, Rob Lapham wrote:
I did use Johns web app and it came up with the same values as the draws manager. I have turned  the gain up all the way and no clean tone.
the radio works fine with my other rp4 and a signal link so I think the radio is ok. also install another cable still no clean audio.
I lost
Rob k6jus

Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Jonathan Magee
 

Hi Mike,
I can confirm that I am powering it via the 12 volt plug.  When you write up your clean install, please could you specify which version of the buster image you use. I am using a Pi4 for all the steps.  I initially was using the "Raspbian Buster with desktop and recommended software" version but to speed up the imaging of the sd card I tried ""Raspbian Buster with desktop" but with the smaller image I wasn't even seeing the built in sound device after completing all the steps. I will keep trying things as I am determined to get it working.
73 de Jonathan GI7KMC

On Wed, 28 Aug 2019 at 20:14, Mike Watkins via Groups.Io <mike.watkins=vectorradio.ca@groups.io> wrote:
I promise to do a clean install on Buster, no scripts, to documents what it is I did to get the sound card detected.

Just to confirm with everyone that is chiming in right now that hasn't got it working, you are powering the device through the 12-volt plug, not through the raspberry Pi, correct? sorry to ask such a basic question but there's been so many emails going back and forth, best to be certain.

The steps to get it to be recognized we're not complicated but there is something missing that I just can't remember right now. 

73
Mike VE7WV

On Wed., Aug. 28, 2019, 11:21 Frank Ivan via Groups.Io, <k0fei=me.com@groups.io> wrote:
Hi John,

Decided to try again with new SD card and all.

1. Downloaded Buster 2019-07-10-raspbian-buster.img
2.Got new SanDisk Extreme 64 gig SD out of package.
3. Used Etcher to flash image.
4. Booted SD in Raspberry Pi 3B+ with original DRAWS hat installed - running from power through micro-USB port.
5. Boot resized file system and entered United States - and Denver then set password and then selected WiFi.
6. Rebooted.
7. Did sudo apt update - then sudo apt dist-upgrade.
8. Rebooted.
9. sudo apt install git build-essential vim and nmap - git and build-essential were up to date installed vim and nmap
10. git clone https://github.com/nwdigitalradio/n7nix.git
11. cd n7nix/config
12. sudo ./image_install.sh
13. sudo apt --fix-broken install
14 reboot
15. sudo apt update - sudo apt upgrade - nothing installed
16. cd n7nix/bin
17. ./sndcard.sh - No UDRC sound card found.
18 enable ssh to be able to cut and paste commands.
19 aplay -l

 

**** List of PLAYBACK Hardware Devices ****

card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]

  Subdevices: 7/7

  Subdevice #0: subdevice #0

  Subdevice #1: subdevice #1

  Subdevice #2: subdevice #2

  Subdevice #3: subdevice #3

  Subdevice #4: subdevice #4

  Subdevice #5: subdevice #5

  Subdevice #6: subdevice #6

card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

20../showudrc.sh

chk1: snd-soc-tlv320aic32x4-i2c.ko exists, Driver CONFLICT

chk2: snd-soc-tlv320aic32x4.ko exists, Driver CONFLICT

==== Sound Card ====

No udrc sound card found.

==== Pi Ver ====

 Pi 3 Model B+ Mfg by Sony UK

 Has WiFi

==== udrc Ver ====

Found a DRAWS

 

     HAT ID EEPROM

Name:        hat

Product:     Digital Radio Amateur Work Station

Product ID:  0x0004

Product ver: 0x0204

UUID:        2420cda1-931d-478c-80e5-d770f3346adb

Vendor:      NW Digital Radio

 

==== sys Ver ====

----- image version

2019 08 28 11:40:22 MDT: image_install.sh: image install script START

----- /proc/version

Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019

 

----- /etc/*version: 10.0

 

----- /etc/*release

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"

NAME="Raspbian GNU/Linux"

VERSION_ID="10"

VERSION="10 (buster)"

VERSION_CODENAME=buster

ID=raspbian

ID_LIKE=debian

HOME_URL="http://www.raspbian.org/"

SUPPORT_URL="http://www.raspbian.org/RaspbianForums"

BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

 

----- lsb_release

No LSB modules are available.

Distributor ID: Raspbian

Description: Raspbian GNU/Linux 10 (buster)

Release: 10

Codename: buster

 

---- systemd

   Static hostname: raspberrypi

         Icon name: computer

        Machine ID: 4b4422b92c324d0abed84ad9f45dc301

           Boot ID: 58ad2de1744940d9bf6d256c87ee90be

  Operating System: Raspbian GNU/Linux 10 (buster)

            Kernel: Linux 4.19.66-v7+

      Architecture: arm

 

---- modules

 

Command 'apt-get install udrc-dkms' failed or was not run.

 

---- kernel

dpkg-query: no packages found matching udrc-dkms

|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

||/ Name               Version      Architecture Description

+++-==================-============-============-=================================

ii  raspberrypi-kernel 1.20190819-1 armhf        Raspberry Pi bootloader

 

 

Directory: /proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 does NOT exist

 

Directory: /proc/device-tree/soc/i2c@7e804000 exists and status is disabled

 

---- syslog

 

---- dmesg

 

---- compass

Compass preference file not found: /etc/apt/preferences.d/compass

Compass apt sources list file not found: /etc/apt/sources.list.d/compass.list

---- compass package files

ls: cannot access '/var/lib/apt/lists/archive.compasslinux.org_*': No such file or directory

 

----- Dire Wolf DEVELOPMENT version 1.6 C (Aug 28 2019)

 

==== Filesystem ====

/dev/root        59G  3.5G   53G   7% /

 

==== boot config ====

 

# Enable audio (loads snd_bcm2835)

dtparam=audio=on

 

[pi4]

# Enable DRM VC4 V3D driver on top of the dispmanx display stack

dtoverlay=vc4-fkms-v3d

max_framebuffers=2

 

[all]

#dtoverlay=vc4-fkms-v3d

 

# enable udrc/draws if no eeprom

dtoverlay=draws,alsaname=udrc

force_turbo=1

 

---- gpsd

/usr/local/sbin/gpsd

gpsd: 3.19 (revision 3.19)

● gpsd.service - GPS (Global Positioning System) Daemon

   Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: enabled)

   Active: active (running) since Wed 2019-08-28 12:09:50 MDT; 8min ago

 Main PID: 487 (gpsd)

    Tasks: 1 (limit: 2200)

   Memory: 828.0K

   CGroup: /system.slice/gpsd.service

           └─487 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0

 

Aug 28 12:09:50 raspberrypi systemd[1]: Starting GPS (Global Positioning System) Daemon...

Aug 28 12:09:50 raspberrypi systemd[1]: Started GPS (Global Positioning System) Daemon.

Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR: SER: device open of /dev/ttySC0 failed: No such file or directory - retrying read-only

Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR: SER: read-only device open of /dev/ttySC0 failed: No such file or directory

Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR: initial GPS device /dev/ttySC0 open failed

Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR: SER: device open of /dev/pps0 failed: No such file or directory - retrying read-only

Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR: SER: read-only device open of /dev/pps0 failed: No such file or directory

Aug 28 12:09:50 raspberrypi gpsd[487]: gpsd:ERROR: initial GPS device /dev/pps0 open failed

 

---- chrony

ls: cannot access '/dev/pps*': No such file or directory

ls: cannot access '/dev/ttySC*': No such file or directory

-- chrony sources

210 Number of sources = 6

MS Name/IP address         Stratum Poll Reach LastRx Last sample               

===============================================================================

#? GPS                           0   3     0     -     +0ns[   +0ns] +/-    0ns

#? PPS                           0   3     0     -     +0ns[   +0ns] +/-    0ns

^* time.nullroutenetworks.c>     2   6   377    25  -2585us[-2695us] +/-   26ms

^+ 216.126.233.109               2   6   377    85  -2683us[-2784us] +/-   33ms

^+ vf2.bbnx.net                  2   6   377    88  +4271us[+4170us] +/-   62ms

^- h184-60-28-49.mdtnwi.dsl>     2   6   377    89  +4790us[+4690us] +/-   68ms

-- chrony tracking

Reference ID    : 1783A007 (time.nullroutenetworks.com)

Stratum         : 3

Ref time (UTC)  : Wed Aug 28 18:18:05 2019

System time     : 0.000431385 seconds fast of NTP time

Last offset     : -0.000109855 seconds

RMS offset      : 0.002575286 seconds

Frequency       : 5.132 ppm fast

Residual freq   : -0.043 ppm

Skew            : 3.747 ppm

Root delay      : 0.029145319 seconds

Root dispersion : 0.007230671 seconds

Update interval : 64.2 seconds

Leap status     : Normal

-- chrony sourcestats

210 Number of sources = 6

Name/IP Address            NP  NR  Span  Frequency  Freq Skew  Offset  Std Dev

==============================================================================

GPS                         0   0     0     +0.000   2000.000     +0ns  4000ms

PPS                         0   0     0     +0.000   2000.000     +0ns  4000ms

time.nullroutenetworks.c>  11   8   457     -0.555      4.369   -538us   457us

216.126.233.109            10   8   395     +0.003      7.370  -2334us   657us

vf2.bbnx.net               10   5   394     +3.868     12.961  +5571us  1182us

h184-60-28-49.mdtnwi.dsl>  10   5   393     -4.706     23.535  +4642us  1796us

 

---- sensors

-rw-r--r-- 1 root root 171 Aug 28 11:50 /etc/sensors.d/draws

rpi_volt-isa-0000

Adapter: ISA adapter

in0:              N/A  

 

 

---- throttle

throttled=0x0

---- locale

Locale country codes consistent among WiFi cfg file, iw reg & X11: US

 

core_config.sh has been run 0 time(s)


Thats a blow by blow.

Thanks
Frank - K0FEI
Re: Eureka!!!! She works perfectly!!

Bill Vodall
 

Is this carefully explained somewhere? It seems a bit weird to have
to pull a pin from a data cable. (Or is it like the rPI 4 charging
cables...)


I removed pin six on one end of the mini 6 Din cable and the lost audio returned .. (on the FT 817)
Bill
Re: no transmit #wsjt-x

Rob Lapham
 

I did use Johns web app and it came up with the same values as the draws manager. I have turned  the gain up all the way and no clean tone.
the radio works fine with my other rp4 and a signal link so I think the radio is ok. also install another cable still no clean audio.
I lost
Rob k6jus
Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

Frank Ivan
 

Hi John,

I redid it using sudo apt upgrade - no difference.

Maybe the best way forward, since you guys can get it to go, would be to just have you guys make a buster image ready to go for the Pi4 and Pi3 that we could download and flash to a SD.

Thanks
Frank - K0FEI
 
1481 - 1500 of 5335  
More
Home Messages Hashtags Wiki About Features Pricing Updates Terms Help Twitter