Date   

Re: Raspberry Pi 4

Basil Gunn
 

While Anna's tlv320aic32x4 driver for DRAWS is in Raspbian kernel
4.19.50, all of her i2c timer patches are not yet in this kernel. From
Anna:

Check this directory for a clock entry marked as i2c_div in the output
/sys/kernel/debug/clk/clk_summary

I've done some preliminary testing with Raspbian 4.19.50 as well and so
far I haven't come across anything but be aware that all of Anna's
recent patches have not made it into the current Raspbian kernel.

/Basil n7nix


LA9KOA - Karl <oyoygard@...> writes:

Annaliese's driver is included in kernel 4.19.50 that is shipped with Rasbian Buster.

Sound and GPS on DRWS HAT confirmed working.
See LA4RHA Lars' post for his worklog of how he set up his RPi4 with DRAWS.

https://nw-digital-radio.groups.io/g/udrc/message/3641


Re: Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

 

Lars,

Great work.  To your question, yes you should build fldigi and flrig from source.  

John


Re: Raspberry Pi 4

JT Croteau <jt.tobit@...>
 

Thanks for this early work Lars and Karl.  I've been trying to decide whether to go with the 4 now or get a e for my new build.

This early work is encouraging. 

N1ESE

On Fri, Jul 5, 2019, 09:20 LA9KOA - Karl <oyoygard@...> wrote:

Annaliese's driver is included in kernel 4.19.50 that is shipped with Rasbian Buster.

Sound and GPS on DRWS HAT confirmed working. 
See LA4RHA Lars' post for his worklog of how he set up his RPi4 with DRAWS.

https://nw-digital-radio.groups.io/g/udrc/message/3641

Best,

Karl


Re: Raspberry Pi 4

LA9KOA - Karl
 

Annaliese's driver is included in kernel 4.19.50 that is shipped with Rasbian Buster.

Sound and GPS on DRWS HAT confirmed working. 
See LA4RHA Lars' post for his worklog of how he set up his RPi4 with DRAWS.

https://nw-digital-radio.groups.io/g/udrc/message/3641

Best,

Karl


Using the DRAWS hat with a Raspberry Pi 4 #yaac #replacecompass #draws #install #js8call

la4rha@...
 

Hi all,

Not sure if this is the correct group, mods: please feel free to move this to another group if it belongs there !

LA9KOA Karl and I have started using our DRAWS on a Raspberry Pi 4. As of now we have WSJT-X, JS8Call, YAAC and Xastir working on the Raspbian Buster image. This has been through some basic tests with a Yaesu FT-891. There is still a lot to test, but so far it seems to be working quite well. YMMV

FLDigi is installed, but not yet tested

If you want to set this up yourselves, our notes/worklog is here: https://docs.google.com/document/d/1Wq-jNLXYuREIOcr0OVu1FxPNhDFGuCOu6dX5OQ2BVxA/edit?usp=sharing
Please be aware that this is a work in progress, so changes and alterations should be expected !

We appreciate any comments, both here, and in the google document

73, de
LA4RHA Lars


Re: piardopc?

Basil Gunn
 

I had piardopc working with arim on the original UDRC & UDRC II hats
about a year ago. Should work with DRAWS hat as well.

Set you gpio depending on which mDin6 connector you are using.
For a DRAWS hat left = gpio 12, right = gpio 23. Make sure that direwolf
is NOT running.

Command line I used:
./piardopc 8515 plughw:1,0 plughw:1,0 -p GPIO=23

Added this to .asoundrc

pcm.ARDOP {
type rate
slave {
pcm "hw:1,0"
rate 12000
}
}

I found that using arim was useful in getting piardopc going because of
its debug facilities.

https://www.whitemesa.net/arim/arim.html

/Basil n7nix


Re: piardopc?

km4ack
 

So I was looking in the wrong direction. PTT is controlled in Pat instead of piARDOPc. PTT is working. Will have to try and deal with audio tomorrow evening. The learning curve continues.


73,
Jason
KM4ACK
Find me on YouTube


Re: piardopc?

 

Try running as root (sudo), it may just be a permissions issue.

On Wed, Jul 3, 2019 at 4:53 PM km4ack <jason.oleham@...> wrote:
installed pulse audio (no errors seen)

sudo systemctl enable pulseaudio
returns
Failed to enable unit: File pulseaudio.service: No such file or directory

Just for grins I ran

./piardopc -c GPIO=12 8515 plughw:CARD=udrc,DEV=0 plughw:CARD=udrc,DEV=0
Below are the results. Note the second line. Same results with GPIO=23

------------------------------------------------------------------------------

ARDOPC Version 1.0.4.1i-BPQ
 GPIO=12 could not be opened
ARDOPC listening on port 8515
Capture Devices

Card 0, ID `ALSA', name `bcm2835 ALSA'

Card 1, ID `udrc', name `udrc'
  Device hw:1,0 ID `Universal Digital Radio Controller tlv320aic32x4-hifi-0', name `', 1 subdevices (1 available)
    2 channels,  sampling rate 8000..96000 Hz

Playback Devices

Card 0, ID `ALSA', name `bcm2835 ALSA'
  Device hw:0,0 ID `bcm2835 ALSA', name `bcm2835 ALSA', 7 subdevices (7 available)
    1..2 channels, sampling rate 8000..48000 Hz
  Device hw:0,1 ID `bcm2835 ALSA', name `bcm2835 IEC958/HDMI', 1 subdevices (1 available)
    2 channels,  sampling rate 44100..48000 Hz

Card 1, ID `udrc', name `udrc'
  Device hw:1,0 ID `Universal Digital Radio Controller tlv320aic32x4-hifi-0', name `', 1 subdevices (1 available)
    2 channels,  sampling rate 8000..96000 Hz

Opening Playback Device plughw:CARD=udrc,DEV=0 Rate 12000
Opening Capture Device plughw:CARD=udrc,DEV=0 Rate 12000
ARDOPC listening on port 8515
Input peaks = -856, 793
terminating on SIGINT



--
John D. Hays
Kingston, WA
K7VE

 


Re: piardopc?

km4ack
 

installed pulse audio (no errors seen)

sudo systemctl enable pulseaudio
returns
Failed to enable unit: File pulseaudio.service: No such file or directory

Just for grins I ran

./piardopc -c GPIO=12 8515 plughw:CARD=udrc,DEV=0 plughw:CARD=udrc,DEV=0
Below are the results. Note the second line. Same results with GPIO=23

------------------------------------------------------------------------------

ARDOPC Version 1.0.4.1i-BPQ
 GPIO=12 could not be opened
ARDOPC listening on port 8515
Capture Devices

Card 0, ID `ALSA', name `bcm2835 ALSA'

Card 1, ID `udrc', name `udrc'
  Device hw:1,0 ID `Universal Digital Radio Controller tlv320aic32x4-hifi-0', name `', 1 subdevices (1 available)
    2 channels,  sampling rate 8000..96000 Hz

Playback Devices

Card 0, ID `ALSA', name `bcm2835 ALSA'
  Device hw:0,0 ID `bcm2835 ALSA', name `bcm2835 ALSA', 7 subdevices (7 available)
    1..2 channels, sampling rate 8000..48000 Hz
  Device hw:0,1 ID `bcm2835 ALSA', name `bcm2835 IEC958/HDMI', 1 subdevices (1 available)
    2 channels,  sampling rate 44100..48000 Hz

Card 1, ID `udrc', name `udrc'
  Device hw:1,0 ID `Universal Digital Radio Controller tlv320aic32x4-hifi-0', name `', 1 subdevices (1 available)
    2 channels,  sampling rate 8000..96000 Hz

Opening Playback Device plughw:CARD=udrc,DEV=0 Rate 12000
Opening Capture Device plughw:CARD=udrc,DEV=0 Rate 12000
ARDOPC listening on port 8515
Input peaks = -856, 793
terminating on SIGINT


Re: piardopc?

km4ack
 

John,

Thank you for the information. I'll look into it and report back as time permits.

73,
Jason
KM4ACK
Find me on YouTube


Re: piardopc?

 

I haven't had a chance to play with it yet and thus have not configured it.

From a high level, you should be able to use DRAWS™ for piardopc.  

You would configure the sound to use the ALSA sound channels (left or right) or install pulse audio and be able to select the left or right channel from it.  See: https://github.com/nwdigitalradio/split-channels 

Based on this document, you should be able to activate PTT on GPIO 12 ( -c GPIO=12) or 23 ( -c GPIO=23) depending which DIN connector you are using.

Use the DRAWS™ Manager tool to set levels, if using ALSA raw left and right. See  https://www.youtube.com/watch?v=v5C3cWVVz_A

Schematic and pinout is at https://nw-digital-radio.groups.io/g/udrc/files/DRAWSTech.pdf

On Wed, Jul 3, 2019 at 8:35 AM km4ack <jason.oleham@...> wrote:
I posted this in the main group but maybe that was the wrong place.

Is it possible to run piardopc by John Wiseman with the DRAWS hat? If so, what startup parameters would I use?

73,
Jason
KM4ACK
Find me on YouTube


--
John D. Hays
Kingston, WA
K7VE

 


piardopc?

km4ack
 

I posted this in the main group but maybe that was the wrong place.

Is it possible to run piardopc by John Wiseman with the DRAWS hat? If so, what startup parameters would I use?

73,
Jason
KM4ACK
Find me on YouTube


Re: Audio Problem with DRAWs Hat

john.chabalko@...
 

I went back to a stock build - reflashed the card and ran through setup. I'm up and running again. Something definitely got hosed but it's all better now ;)


Re: DRAWS Case

 

Read the blog on the company site. General updates are provided there. Individual order questions should be entered on the form on the support page, include order number. 


On Mon, Jun 24, 2019, 10:19 August Johnson <augjohnson@...> wrote:
Notice the date on the message I'm replying to. April 10

I bought an early adopter DRAWS many months ago, paid for the early-adopter AL case at beginning of May, still don't have any word on the case. Anything??? You got my money!

August KG7BZ

On Wed, Apr 10, 2019 at 7:24 AM John D Hays - K7VE <john@...> wrote:
Wayne

A nice, custom, metal case will be available from NW Digital Radio soon. 

On Wed, Apr 10, 2019, 07:19 Wayne Harrell WD4LYV <wd4lyv@...> wrote:
What case for Pi 3+ do I need for my new DRAWS board? 

Wayne WD4LYV


Re: DRAWS Case

Joseph Vilardo
 

David

Nice case thanks. I have used the C4 Labs case for several of my Rpi's and really like the way the package looks. I am going to order one for the Draws/pi combo.

Joe

On 6/29/2019 11:05 AM, David [kg5eiu] via Groups.Io wrote:
I just picked up a new case from C4 Labs - nice case.
Check out the photo in this gallery here.


Re: DRAWS Case

David [kg5eiu]
 

I just picked up a new case from C4 Labs - nice case.
Check out the photo in this gallery here.


Audio Problem with DRAWs Hat

john.chabalko@...
 

Apparently it's tough times around these parts - and all was working great just a couple of days ago.

I have a functional DRAWs had an the UDRC drivers are loaded and running. The DRAWS manager is running, everything seems normal - except in wsjt-x (and others) i'm getting audio errors on startup - both input and output devices. The devices i'm using are:
Input: plughw:CARD=udrc, DEV=0
Output: plughw:CARD=udrc, DEV=0

"Requested [output,input] audio format is not supported on device"

pi@n3ap-p:~/bin $ prog_refresh.sh -c
js8call: current version: 1.1.0, installed: 1.1.0
wsjtx:   current version: 2.0.1, installed: 2.1.0-rc7
Library: libflxmlrpc IS loaded.
flxmlrpc:  current version: 0.1.4, installed: 0.1.4
fldigi:  current version: 4.1.04, installed: 4.1.01
flrig:  current version: 1.3.45, installed: 1.3.42
flmsg:  current version: 4.0.10, installed: 4.0.8
flamp:  current version: 2.2.04, installed: 2.2.04
xs_verchk.sh: Detected xastir package.
xastir: current version: 2.1.3, installed: 2.1.3
gp_verchk.sh: Detected gpsd package.
gpsd: current version: 3.18.1, installed: 3.18.1
pi@n3ap-p:~/bin $ cd
pi@n3ap-p:~ $ cd n7nix/
pi@n3ap-p:~/n7nix $ git pull
Already up-to-date.


pi@n3ap-p:~ $ showudrc.sh
==== Sound Card ====
udrc card number line: card 1: udrc [udrc], device 0: Universal Digital Radio Controller tlv320aic32x4-hifi-0 []
udrc is sound card #1
==== ALSA Controls for Radio Tansmit ====
LO Driver Gain  L:[-6.00dB]    R:[-6.00dB]
PCM            L:[-25.00dB]    R:[-25.00dB]
DAC Playback PT    L:[PTM_P3]    R:[PTM_P3]
LO Playback CM    [Full Chip CM]
==== ALSA Controls for Radio Receive ====
ADC Level    L:[0.00dB]    R:[0.00dB]
IN1        L:[Off]        R:[Off]
IN2        L:[10 kOhm]    R:[10 kOhm]
==== Pi Ver ====
 Pi 3 Model B+ Mfg by Sony UK
 Has WiFi
==== udrc Ver ====
Found a DRAWS

     HAT ID EEPROM
Name:        hat
Product:     Digital Radio Amateur Work Station
Product ID:  0x0004
Product ver: 0x0405
UUID:        b1f4e1df-11e0-4d2b-b213-c87b4dacb830
Vendor:      NW Digital Radio

==== sys Ver ====
----- image version
2019 03 31 13:53:37 PDT: SD image version: beta10
----- /proc/version
Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019

----- /etc/*version: 9.8

----- /etc/*release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

----- lsb_release
No LSB modules are available.
Distributor ID:    Raspbian
Description:    Raspbian GNU/Linux 9.8 (stretch)
Release:    9.8
Codename:    stretch

---- systemd
   Static hostname: n3ap-p
         Icon name: computer
        Machine ID: 2f51e140e908474eaa86ae805f03a6d8
           Boot ID: b21a8b0ee78b4f73bbe8a4fde12396b6
  Operating System: Raspbian GNU/Linux 9 (stretch)
            Kernel: Linux 4.14.98-v7+
      Architecture: arm

---- modules
tlv320aic32x4_i2c      16384  1
tlv320aic32x4          32768  1 tlv320aic32x4_i2c
udrc                   16384  3
snd_soc_core          188416  3 tlv320aic32x4,snd_soc_bcm2835_i2s,udrc
snd_pcm                98304  7 snd_pcm_dmaengine,tlv320aic32x4,snd_soc_bcm2835_i2s,snd_bcm2835,snd_soc_core

-rw-r--r-- 1 root  6388 Feb 26 15:24 /lib/modules/4.14.98-v7+/updates/dkms/tlv320aic32x4-i2c.ko
-rw-r--r-- 1 root 39084 Feb 26 15:24 /lib/modules/4.14.98-v7+/updates/dkms/tlv320aic32x4.ko
-rw-r--r-- 1 root  6408 Feb 26 15:24 /lib/modules/4.14.98-v7+/updates/dkms/tlv320aic32x4-spi.ko
-rw-r--r-- 1 root  8332 Feb 26 15:24 /lib/modules/4.14.98-v7+/updates/dkms/udrc.ko

---- kernel
||/ Name               Version      Architecture Description
+++-==================-============-============-=================================
ii  raspberrypi-kernel 1.20190215-1 armhf        Raspberry Pi bootloader
ii  udrc-dkms          1.0.5        armhf        DKMS source for the UDRC driver

Directory: /proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 exists and status is okay

---- syslog
Jun 28 17:30:23 n3ap-p bash[420]: UDRC_PROD: Digital Radio Amateur Work Station, ID: 4
Jun 28 17:30:23 n3ap-p kernel: [    3.320902] udrc: loading out-of-tree module taints kernel.
Jun 28 17:30:23 n3ap-p kernel: [    3.321806] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
Jun 28 17:30:23 n3ap-p kernel: [    3.321818] snd-udrc soc:sound: snd_soc_register_card() failed: -517
Jun 28 17:30:23 n3ap-p kernel: [    3.347796] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
Jun 28 17:30:23 n3ap-p kernel: [    3.347807] snd-udrc soc:sound: snd_soc_register_card() failed: -517
Jun 28 17:30:23 n3ap-p kernel: [    3.349131] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
Jun 28 17:30:23 n3ap-p kernel: [    3.349138] snd-udrc soc:sound: snd_soc_register_card() failed: -517
Jun 28 17:30:23 n3ap-p kernel: [    3.349318] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
Jun 28 17:30:23 n3ap-p kernel: [    3.349324] snd-udrc soc:sound: snd_soc_register_card() failed: -517
Jun 28 17:30:23 n3ap-p kernel: [    3.356339] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
Jun 28 17:30:23 n3ap-p kernel: [    3.356347] snd-udrc soc:sound: snd_soc_register_card() failed: -517
Jun 28 17:30:23 n3ap-p kernel: [    3.356532] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
Jun 28 17:30:23 n3ap-p kernel: [    3.356537] snd-udrc soc:sound: snd_soc_register_card() failed: -517
Jun 28 17:30:23 n3ap-p kernel: [    3.496347] snd-udrc soc:sound: tlv320aic32x4-hifi <-> 3f203000.i2s mapping ok
Jun 28 17:30:23 n3ap-p bash[420]: UDRC II or DRAWS installed
Jun 28 17:30:23 n3ap-p bash[420]: using mkiss with UDRC II and pseudo term_1: /dev/pts/2 pseudo term_2: /dev/pts/3
Jun 28 17:36:09 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_L to Left Mixer Positive Resistor' 'Off'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_L to Left Mixer Positive Resistor' '10 kOhm'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_R to Right Mixer Positive Resistor' '10 kOhm'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_R to Right Mixer Positive Resistor' 'Off'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_R to Right Mixer Negative Resistor' '10 kOhm'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_L to Left Mixer Negative Resistor' '10 kOhm'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LO DAC' 'on,on'
Jun 28 17:36:10 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOL Output Mixer L_DAC' 'on'
Jun 28 17:36:11 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOR Output Mixer R_DAC' 'on'
Jun 28 17:36:11 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_L to Left Mixer Positive Resistor' 'Off'
Jun 28 17:36:11 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_L to Left Mixer Positive Resistor' '10 kOhm'
Jun 28 17:36:11 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_R to Right Mixer Positive Resistor' 'Off'
Jun 28 17:36:11 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_R to Right Mixer Positive Resistor' '10 kOhm'
Jun 28 17:36:11 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_R to Right Mixer Negative Resistor' '10 kOhm'
Jun 28 17:36:12 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_L to Left Mixer Negative Resistor' '10 kOhm'
Jun 28 17:36:12 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LO DAC' 'on,on'
Jun 28 17:36:12 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOL Output Mixer L_DAC' 'on'
Jun 28 17:36:12 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOR Output Mixer R_DAC' 'on'
Jun 28 17:38:57 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_L to Left Mixer Positive Resistor' '10 kOhm'
Jun 28 17:38:57 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_L to Left Mixer Positive Resistor' 'Off'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_R to Right Mixer Positive Resistor' 'Off'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_R to Right Mixer Positive Resistor' '10 kOhm'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_R to Right Mixer Negative Resistor' '10 kOhm'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_L to Left Mixer Negative Resistor' '10 kOhm'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LO DAC' 'on,on'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOL Output Mixer L_DAC' 'on'
Jun 28 17:38:58 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOR Output Mixer R_DAC' 'on'
Jun 28 17:39:00 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_L to Left Mixer Positive Resistor' '10 kOhm'
Jun 28 17:39:00 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_L to Left Mixer Positive Resistor' 'Off'
Jun 28 17:39:00 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN2_R to Right Mixer Positive Resistor' '10 kOhm'
Jun 28 17:39:00 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'IN1_R to Right Mixer Positive Resistor' 'Off'
Jun 28 17:39:00 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_R to Right Mixer Negative Resistor' '10 kOhm'
Jun 28 17:39:00 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'CM_L to Left Mixer Negative Resistor' '10 kOhm'
Jun 28 17:39:01 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LO DAC' 'on,on'
Jun 28 17:39:01 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOL Output Mixer L_DAC' 'on'
Jun 28 17:39:01 n3ap-p npm[588]: /usr/bin/amixer -c udrc sset 'LOR Output Mixer R_DAC' 'on'

---- dmesg
[    3.320902] udrc: loading out-of-tree module taints kernel.
[    3.321806] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
[    3.321818] snd-udrc soc:sound: snd_soc_register_card() failed: -517
[    3.347796] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
[    3.347807] snd-udrc soc:sound: snd_soc_register_card() failed: -517
[    3.349131] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
[    3.349138] snd-udrc soc:sound: snd_soc_register_card() failed: -517
[    3.349318] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
[    3.349324] snd-udrc soc:sound: snd_soc_register_card() failed: -517
[    3.356339] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
[    3.356347] snd-udrc soc:sound: snd_soc_register_card() failed: -517
[    3.356532] snd-udrc soc:sound: ASoC: CODEC DAI tlv320aic32x4-hifi not registered - will retry
[    3.356537] snd-udrc soc:sound: snd_soc_register_card() failed: -517
[    3.496347] snd-udrc soc:sound: tlv320aic32x4-hifi <-> 3f203000.i2s mapping ok

---- compass
Compass preference file not found: /etc/apt/preferences.d/compass
---- compass apt sources list file
deb [arch=armhf,amd64] http://archive.compasslinux.org/ cedar main
---- compass package files
-rw-r--r-- 1 root  2201 Dec 31 10:44 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_InRelease
-rw-r--r-- 1 root 17567 Jul  2  2018 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_main_binary-amd64_Packages
-rw-r--r-- 1 root 43316 Dec 31 10:44 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_main_binary-armhf_Packages

----- Dire Wolf DEVELOPMENT version 1.6 B (Feb 27 2019)

==== Filesystem ====
/dev/root        30G  5.8G   23G  21% /

==== boot config ====

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
#dtparam=audio=on

force_turbo=1
dtoverlay=
dtoverlay=draws,alsaname=udrc

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

---- gpsd
/usr/local/sbin/gpsd
gpsd: 3.18.1 (revision 3.18.1)
● gpsd.service - GPS (Global Positioning System) Daemon
   Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: enabled)
   Active: active (running) since Fri 2019-06-28 17:30:25 PDT; 1h 4min ago
  Process: 631 ExecStart=/usr/local/sbin/gpsd $GPSD_OPTIONS $OPTIONS $DEVICES (code=exited, status=0/SUCCESS)
 Main PID: 654 (gpsd)
   CGroup: /system.slice/gpsd.service
           └─654 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0

Jun 28 17:30:25 n3ap-p systemd[1]: Starting GPS (Global Positioning System)…n...
Jun 28 17:30:25 n3ap-p systemd[1]: Started GPS (Global Positioning System) …mon.
Hint: Some lines were ellipsized, use -l to show in full.

---- chrony
crw-rw---- 1 root root    243, 0 Jun 28 17:30 /dev/pps0
crw------- 1 root root    243, 1 Jun 28 17:30 /dev/pps1
crw-rw---- 1 root dialout 242, 0 Jun 28 17:30 /dev/ttySC0
crw-rw---- 1 root dialout 242, 1 Jun 28 17:30 /dev/ttySC1
-- chrony sources
210 Number of sources = 6
MS Name/IP address         Stratum Poll Reach LastRx Last sample              
===============================================================================
#? GPS                           0   3     0     -     +0ns[   +0ns] +/-    0ns
#? PPS                           0   3     0     -     +0ns[   +0ns] +/-    0ns
^+ 2600:3c01::f03c:91ff:feb>     2   9   377   152   -543us[ -543us] +/-   35ms
^- ha81.smatwebdesign.com        2   9   377    84   -702us[ -702us] +/-   71ms
^+ 2604:880:398:371::1           2   9   377   926  -1109us[-1109us] +/-   30ms
^* propjet.latt.net              3   9   377   22m   +313us[ +376us] +/-   21ms
-- chrony tracking
Reference ID    : 0381BBD4 (propjet.latt.net)
Stratum         : 4
Ref time (UTC)  : Sat Jun 29 01:13:04 2019
System time     : 0.000030855 seconds fast of NTP time
Last offset     : +0.000063505 seconds
RMS offset      : 0.000132425 seconds
Frequency       : 4.676 ppm fast
Residual freq   : +0.006 ppm
Skew            : 0.227 ppm
Root delay      : 0.016767 seconds
Root dispersion : 0.009681 seconds
Update interval : 257.1 seconds
Leap status     : Normal
-- chrony sourcestats
210 Number of sources = 6
Name/IP Address            NP  NR  Span  Frequency  Freq Skew  Offset  Std Dev
==============================================================================
GPS                         0   0     0     +0.000   2000.000     +0ns  4000ms
PPS                         0   0     0     +0.000   2000.000     +0ns  4000ms
2600:3c01::f03c:91ff:feb>  26  12   61m     -0.087      1.238   -651us  1638us
ha81.smatwebdesign.com     27  13   62m     -0.946      0.401  -1145us   439us
2604:880:398:371::1        27  15   48m     -0.085      0.325   -153us   366us
propjet.latt.net           27  15   42m     +0.003      0.252   +120us   241us

---- sensors
-rw-r--r-- 1 root root 171 Nov 11  2018 /etc/sensors.d/draws
ads1015-i2c-1-48
Adapter: bcm2835 I2C adapter
User ADC Differential:  +0.00 V 
+12V:                   +0.00 V 
User ADC 1:             +0.00 V 
User ADC 2:             +0.00 V 

---- locale
Locale country codes consistent among WiFi cfg file, iw reg & X11: US
core_config.sh has been run 1 time(s)


Re: Audio Driver / Module Load Problem #audio #draws #kernel

Basil Gunn
 

I went ahead and rebuilt on a different SD Card i have around for such
purposes. I must have done something the other day when i was checking
for updates. i've got the card hand still but i'll probably just
reflash it and move on.
If you are currently using a 4.14.98-v7+ kernel and try to do an upgrade it will
fail.

Please read this thread:
https://nw-digital-radio.groups.io/g/udrc/topic/error_during_udrc_dkms/31826864?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,31826864

/Basil


Re: Audio Driver / Module Load Problem #audio #draws #kernel

Basil Gunn
 

Hi John,
Sorry for the delay in getting back to you.

I checked a couple of systems I'm currently running & I don't have any
files in /usr/share/udcdkmshack/overlays or
/usr/share/rpikernelhack/overlays

I haven't really seen your problem before but I would delete the files in
/user/share/rpikernelhackoverlays and try upgrading udrc-dkms again.

apt-get install udrc-dkms

The good news is the dynamic kernel module support requirement will go
away in the near future as the required tlv320aic audio codec driver is part of
main stream Linux kernel and we are just waiting for it to percolate to the
released kernels. Upgrading will be easier at that point.

The test is as usual reboot & run aplay -l

Let me know how you make out.

/Basil


john.chabalko@... writes:

Thanks Basil. I updated the config.txt has you described. Here's the output of aplay -l after making the change and rebooting:
pi@n3ap-p:~/n7nix/bin $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0

Here's another run of showudrc.sh:

This jumped out to me last night. I ran that command and it didn't
---- modules

*Command 'apt-get install udrc-dkms' failed or was not run.*

*So i ran it:*

*pi@n3ap-p:~/n7nix/bin $ sudo apt-get install udrc-dkms*
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
udrc-dkms
0 upgraded, 1 newly installed, 0 to remove and 6 not upgraded.
Need to get 0 B/27.7 kB of archives.
After this operation, 233 kB of additional disk space will be used.
(Reading database ... 142882 files and directories currently installed.)
Preparing to unpack .../udrc-dkms_1.0.5_armhf.deb ...
dpkg-divert: error: 'diversion of /boot/overlays/udrc.dtbo to /usr/share/udrcdkmshack/udrc.dtbo by udrcdkmshack' clashes with 'diversion of /boot/overlays/udrc.dtbo to /usr/share/rpikernelhack/overlays/udrc.dtbo by rpikernelhack'
dpkg-divert: error: 'diversion of /boot/overlays/draws.dtbo to /usr/share/udrcdkmshack/draws.dtbo by udrcdkmshack' clashes with 'diversion of /boot/overlays/draws.dtbo to /usr/share/rpikernelhack/overlays/draws.dtbo by rpikernelhack'
dpkg: error processing archive /var/cache/apt/archives/udrc-dkms_1.0.5_armhf.deb (--unpack):
subprocess new pre-installation script returned error exit status 2
Errors were encountered while processing:
/var/cache/apt/archives/udrc-dkms_1.0.5_armhf.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

*pi@n3ap-p:~/n7nix/bin $ ./showudrc.sh*
==== Sound Card ====
No udrc sound card found.
==== Pi Ver ====
Pi 3 Model B+ Mfg by Sony UK
Has WiFi
==== udrc Ver ====
Found a DRAWS

HAT ID EEPROM
Name: hat
Product: Digital Radio Amateur Work Station
Product ID: 0x0004
Product ver: 0x0405
UUID: b1f4e1df-11e0-4d2b-b213-c87b4dacb830
Vendor: NW Digital Radio

==== sys Ver ====
----- image version
2019 04 02 13:59:08 PDT: SD image version: beta11
----- /proc/version
Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019

----- /etc/*version: 9.9

----- /etc/*release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

----- lsb_release
No LSB modules are available.
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.9 (stretch)
Release: 9.9
Codename: stretch

---- systemd
Static hostname: n3ap-p
Icon name: computer
Machine ID: 2f51e140e908474eaa86ae805f03a6d8
Boot ID: 3597e372a7b94818bb12291f65dfd7e8
Operating System: Raspbian GNU/Linux 9 (stretch)
Kernel: Linux 4.14.98-v7+
Architecture: arm

---- modules

Command 'apt-get install udrc-dkms' failed or was not run.

---- kernel
||/ Name Version Architecture Description
+++-==================-============-============-=================================
ii raspberrypi-kernel 1.20190401-1 armhf Raspberry Pi bootloader
ic udrc-dkms 1.0.5 armhf DKMS source for the UDRC driver

Directory: /proc/device-tree/soc/i2c@7e804000/tlv320aic32x4@18 exists and status is okay

---- syslog

---- dmesg

---- compass
Compass preference file not found: /etc/apt/preferences.d/compass
---- compass apt sources list file
deb [arch=armhf,amd64] http://archive.compasslinux.org/ cedar main
---- compass package files
-rw-r--r-- 1 root 2201 Dec 31 10:44 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_InRelease
-rw-r--r-- 1 root 17567 Jul 2 2018 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_main_binary-amd64_Packages
-rw-r--r-- 1 root 43316 Dec 31 10:44 /var/lib/apt/lists/archive.compasslinux.org_dists_cedar_main_binary-armhf_Packages

----- Dire Wolf DEVELOPMENT version 1.6 B (Feb 27 2019)

==== Filesystem ====
/dev/root 30G 12G 17G 40% /

==== boot config ====

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
#dtparam=audio=on

force_turbo=1
dtoverlay=
dtoverlay=draws,alsaname=udrc

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

---- gpsd
/usr/local/sbin/gpsd
gpsd: 3.18.1 (revision 3.18.1)
● gpsd.service - GPS (Global Positioning System) Daemon
Loaded: loaded (/lib/systemd/system/gpsd.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2019-06-28 13:35:45 PDT; 5min ago
Process: 475 ExecStart=/usr/local/sbin/gpsd $GPSD_OPTIONS $OPTIONS $DEVICES (code=exited, status=0/SUCCESS)
Main PID: 478 (gpsd)
CGroup: /system.slice/gpsd.service
└─478 /usr/local/sbin/gpsd -n /dev/ttySC0 /dev/pps0

Jun 28 13:35:45 n3ap-p systemd[1]: Starting GPS (Global Positioning System) Daemon...
Jun 28 13:35:45 n3ap-p systemd[1]: Started GPS (Global Positioning System) Daemon.

---- chrony
crw------- 1 root root 243, 0 Jun 28 13:35 /dev/pps0
crw-rw---- 1 root dialout 242, 0 Jun 28 13:35 /dev/ttySC0
crw-rw---- 1 root dialout 242, 1 Jun 28 13:35 /dev/ttySC1
-- chrony sources
210 Number of sources = 6
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
#? GPS 0 3 0 - +0ns[ +0ns] +/- 0ns
#? PPS 0 3 0 - +0ns[ +0ns] +/- 0ns
^? time.richiemcintosh.com 2 6 3 13 +60us[ +579us] +/- 80ms
^* mx.danb.email 2 6 77 12 +556us[+1075us] +/- 35ms
^+ 2001:19f0:8001:1de:5400:> 2 6 77 13 -704us[ -185us] +/- 51ms
^+ 2001:550:1d05:30::58e:3e> 2 6 77 12 +2360us[+2360us] +/- 52ms
-- chrony tracking
Reference ID : 6AE010AC (mx.danb.email)
Stratum : 3
Ref time (UTC) : Fri Jun 28 20:41:25 2019
System time : 0.000348797 seconds fast of NTP time
Last offset : +0.000518640 seconds
RMS offset : 0.000518640 seconds
Frequency : 5.022 ppm fast
Residual freq : +3.283 ppm
Skew : 4.514 ppm
Root delay : 0.016891 seconds
Root dispersion : 0.027005 seconds
Update interval : 65.0 seconds
Leap status : Normal
-- chrony sourcestats
210 Number of sources = 6
Name/IP Address NP NR Span Frequency Freq Skew Offset Std Dev
==============================================================================
GPS 0 0 0 +0.000 2000.000 +0ns 4000ms
PPS 0 0 0 +0.000 2000.000 +0ns 4000ms
time.richiemcintosh.com 2 0 65 -0.090 2000.000 +60us 4000ms
mx.danb.email 6 3 136 +2.368 42.874 +190us 560us
2001:19f0:8001:1de:5400:> 6 6 135 +9.252 54.630 -711us 682us
2001:550:1d05:30::58e:3e> 6 4 136 -0.201 37.648 +2202us 538us

---- sensors
-rw-r--r-- 1 root root 171 Nov 11 2018 /etc/sensors.d/draws
ads1015-i2c-1-48
Adapter: bcm2835 I2C adapter
User ADC Differential: +0.00 V
+12V: +0.00 V
User ADC 1: +0.00 V
User ADC 2: +0.00 V

---- locale
Locale country codes consistent among WiFi cfg file, iw reg & X11: US
core_config.sh has been run 1 time(s)


Re: Audio Driver / Module Load Problem #audio #draws #kernel

john.chabalko@...
 

I went ahead and rebuilt on a different SD Card i have around for such purposes. I must have done something the other day when i was checking for updates. i've got the card hand still but i'll probably just reflash it and move on.