Ah. I see that my assumptions were backwards. It is pulled to 0 when open, 1 when closed. This is the opposite what I assumed. -- Brian Badger

#setup #compassimage #draws #earlyadopters

I made those few changes and up and working great!!!

#draws #gpsd #gps #setup

While the beta image is being prepared, I recommend the directions at http://www.kk5jy.net/fldigi-build/ for building fldigi and flrig. I have done this build and it works fine on the left DIN-6 port.

#fldigi #draws

All DRAWS owners, Setting up xastir for the DRAWS board was not a slam dunk! This message is longish but my discoveries and explanations here may help if you are relatively Raspbian naieve. If you hat

#draws #direwolf #compass #xastir

YAAC works on DRAWS with DIREWOLF over AGWPE socket. If you have GPSD running it can use it as well. From == http://www.ka2ddo.org/ka2ddo/YAAC.html Raspberry Pi Detailed Installation Directions For th

#aprs #draws #yaac #install

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%E2%84%A2%3A-Setup-NTP-Timeserver-Using-Chrony

#draws #ntp #chrony #timeserver #setup