I download the fldigi source from http://www.w1hkj.com/files for the DRAWS image which has fldigi version at 4.1.01 What repository are you using to get 4.1.02.29? I use the script at n7nix/hfprogs/hf

#fldigi

I just did a build on the latest stretch raspbian of the a current version of fldigi. It was necessary to increase the swap space on the current system to get a successful build. The default swap appe

#fldigi

The DRAWS beta 9 image comes with FLDIGI-4.0.18 installed. There are much newer FLDIGI release available so I tried to compile and install FLDIGI-4.1.02.29 and that failed. I downloaded the FLDIGI-4.1

#fldigi

Thanks for finding this. USBAUTO="true" in /etc/default/gpsd is an error. That line has been removed in the BETA8 image. See below. /Basil n7nix Julie McGrew via Groups.Io <juliemcgrew=mac.com@groups.

#draws #fldigi #gpsd #wsjtx

The goal was to control an IC-7300 with a USB cable and operate fldigi, wsjt-x, and JS8Call using the radio's sound card. DRAWS received the audio fine, but would not control the radio. The IC-7300 wa

#draws #fldigi #gpsd #wsjtx

To determine if you have a memory leak: Run top If you are using increasing amounts of swap space you probably have a memory leak. run top like this (batch mode, 1 iteration) to get a snap shot of pro

#draws #fldigi

If you have problems with your RPi freezing: - upon the first boot capture your /var/log/syslog & /var/log/syslog.1 files and look for the last entry before the first boot entry. ie. look for log entr

#draws #fldigi

Yep. Haven't seen any evidence of a pattern or cause though. It happen's sometimes when the system idles unattended and other times while I am using it. My suspicion is either a memory leak somewhere

#draws #fldigi

So I worked winter field day this year, and overall I'm quite happy with the performance of the DRAWS setup... however I did have a couple of system freezes and had to reboot a couple of times. I was

#draws #fldigi

Basil and Bryan, Since you were able to borrow an IC-7000 to test, were you able to make any additional observations on setting up the DRAWS output for this radio with HF digital programs? My IC-7000

#wsjt-x #draws #ic7000 #fldigi

Merry Christmas Julian All of the adjustment I made to the receive signal was through the ADC Level of the alsa mixer. FLDIGI has a go no go "diamond shaped" icon on the bottom tool bar of the main sc

#setup #fldigi #draws

Excellent write up Joe. Did you adjust any other setting than adjusting ADC level in alsamixer for receive level? Outstanding post. Thanks for sharing Julian Julian OH8STN www.oh8stn.org www.youtube.c

#setup #fldigi #draws

Gents I wanted to share the good news of having success with the Beta6 image of draws with Direwolf , YAAC and a leap today with fldigi running on a Kenwood TM-V71 dual bander. I downloaded the beta 6

#setup #fldigi #draws

Jack Thanks, no apology necessary. You gave me the info needed, I forgot about fldigi capability to address Pi GPIO and John K7VE reminded me. I am a bit gun shy on all the traffic concerning audio is

#setup #fldigi #draws

fldigi allows you to key the radio using the gpio pin interface (12) to mini din-6 (left)

#setup #fldigi #draws

Hi Joe, You have a radio I do not know anything about. I’m only about a week ahead of you in learning how to make DRAWS sing. I just happened to have been working with fldigi and my IC-7000 and the qu

#setup #fldigi #draws

Jack Next issue is with getting the radio to transmit. First off, I have used Fldigi with the TM-V71 many times on vhf uhf with success using a signalink and a sound cards with simple interfaces. I no

#setup #fldigi #draws

Jack Thanks, Indeed ax25 was not shut down I ran ./ax25-stop after ./ax25-disable and that did the trick. In the fldigi set up port audio lite up and I was able to select hw udrc 0.0 for capture and p

#setup #fldigi #draws

Joe, Check to make absolutely sure that Direwolf is not running after your reboot. If it is not running, you should see PortAudio as a selectable option. Check the box. Now Select udrc: - (hw:0,0) for

#setup #fldigi #draws

I am looking for some basic guidance on getting fldigi configured for VHF and UHF. I have been successful with the DRAWS Beta 5 image and running Direwolf/YAAC and now that I know the "core image" che

#setup #fldigi #draws