All DRAWS owners, Setting up xastir for the DRAWS board was not a slam dunk! This message is longish but my discoveries and explanations here may help if you are relatively Raspbian naieve. If you hat

#draws #direwolf #compass #xastir

All, I have got things configured to receive in direwolf. Xastir shows heard stations on the map using the direwolf AGW interface. DRAWS UDRC parms were fine adjusted by the bash script and fine adjus

#direwolf #draws #xastir

share your direwolf.conf file (remove IGLOGIN if set) and let us have a look.

#direwolf #draws #xastir

John, As I recall, I did nothing to change the main settings already there, just added MYCALL for the 2 ports and the IGLOGIN call and passcode: ADEVICE plughw:CARD=udrc,DEV=0 ARATE 48000 ACHANNELS 2

#direwolf #draws #xastir

That sounds like you are transmitting at 9600 baud. Is that intentional? A brief burst of static is what you'll hear. Bill

#direwolf #draws #xastir

Hi Bill, I thought of that, but it happened from both 1200 and 9600 ports - there is no sound, not even noise. I know what the 9600 bursts sound like... years ago, I ran an Ottawa PI card. KD4IZ Jack

#direwolf #draws #xastir

In addition – if I use a direwolf.conf for the left port @ 1200 baud and PTT set to GPIO 12, exactly the same as below. PPT is proper timing with no sound. Grrr…. J – KD4IZ

#direwolf #draws #xastir

All, Thanks for your patience on this thread – the problem was not self-evident and I don’t understand why the following situation works for me. The solution was to comment out all references to port

#xastir #direwolf #draws

so I found out about this problem quite by accident... if you run xastir that was installed by apt from the repository and you want to build from the source (for version 2.1.1 or later) you have to re

#draws #xastir #aprs

Debian File System Hierarchy Standard https://wiki.debian.org/FilesystemHierarchyStandard It's a debian convention that locally built binaries use: /usr/local/var /usr/local/etc /usr/local/share /usr/

#draws #xastir #aprs

You could also remove the old xastir and it's config files with: apt-get purge xastir That will remove the config files, then build and install xastir. Or if you want to keep the config files build xa

#draws #xastir #aprs

Once I have A25 and Direwolf running, what Interface option do I select in Xastir? 73s, Ed, KD9FRQ

#xastir

Ed, I am using the AGW interface here. Jack – KD4IZ

#xastir

Ed, If you are referring to XASTIR's Interface drop down window, I use the following after I select "add" which brings up the "Interface type I/F Control" Select AX25 TNC, which brings up "Configure A

#xastir

Thank you.

#xastir

I'm having a heck of a time trying to get GPS data to populate in XASTIR. I can see vaild GPS data coming in via cgps, gpsmon and xgps. GPSD shows active and when I add the port to XASTIR It's coming

#draws #gpsd #config #xastir

Just wanted to share I'm in the exact same situation. Only exception is my install of Xastir has never seen GPS data. I've applied two updates from B9 to current. Gpsmon shows valid data and YAAC work

#draws #gpsd #config #xastir

I would recommend sending Xastir bug reports to https://github.com/Xastir/Xastir/issues

#draws #gpsd #config #xastir

I've posted over a xastir. I've also deleted and installed from git a fresh version of xastir with the same results. It's just weird that I had it working in beta 9 and now it won't work. I might just

#draws #gpsd #config #xastir

I have been playing with the new Draws. I need some pointers in getting the sound to work with Xastir My use of Linux is limited and I'm learning. I know it some setting in direwolf.conf. I did see my

#xastir