Don, First you need to enable the RPi on-board sound device in /boot/config.txt. Not sure why we don't do that by default. Then use the proper device in Xastir. I have some notes here: https://github.

#xastir

I'm beating my head against the wall with this issue. I've done a fresh beta 11 build on a brand new sdcard and I'm still not able to get GPS data into xastir via GPSD. YAAC gets the GPS data fine, bu

#draws #gpsd #config #xastir

There is a problem with Xastir -- there is an issue in the Xastir repository and a developer is interested in investigating it. GPSD communicates with other programs, eg. YAAC, gpsmon, chrony, cgps, e

#draws #gpsd #config #xastir

Josh, I'm in the same boat here. New Beta 11 image. Ran through all the config stuff. Double checked that GPSD and Xastir are current. Still no luck. Confirmed good data from the GPS, and YAAC work as

#draws #gpsd #config #xastir

I guess the bigger question is this issue affecting everybody with a DRAWS hat and beta 11or is it just us lucky select few. If submitted the issue to the xastir community. I still have the zip for be

#draws #gpsd #config #xastir

Xastir & gpsd version 3.18.1 do NOT work. Xastir never reports that the DRAWS gps is working when using Networked GPS (via gpsd). I killed gpsd & tried the DRAWS serial interface to the gps & that doe

#draws #gpsd #config #xastir

Tom, Thanks for the response. I will try the things you mentioned & get back to you. gpsd version 3.18.1 is the latest version and I made the decision to use it back in December. It fixed a couple of

#draws #gpsd #config #xastir

Update from testing a fix provided by Tom Russo. The code change for Xastir provided in Tom's "feature-supportglonass" branch appears to fix the problem of DRAWS gps not working in Xastir. I am contin

#draws #gpsd #config #xastir

Good research and hopefully the fix proves solid over time.

#draws #gpsd #config #xastir

Will the DRAWS image be updated with the working version of Xastir? What must one do to update the version currently running on DRAWS? Thanks for your (rapid) research and help! Edd - KD5M

#draws #gpsd #config #xastir

Yes. I will probably spin up yet another image to accommodate the new Xastir build. Previously Xastir was installed from a Debian package. It is clear that besides fixing a problem with parsing the DR

#draws #gpsd #config #xastir

The problem with Xastir accessing gpsd for position data has been identified and a patch has been tested and merged into the Xastir master source on GitHUB. Thanks to Tom Russo of the Xastir team and

#draws #gpsd #config #xastir

I rebuilt Xastir from the latest git pull (2.1.1) and I'm now able to use GPSD to update my location. Basil you were better able to explain to Tom and Curt what the hardware DRAWS is using, I opened t

#draws #gpsd #config #xastir

Here is a screenshot from K7UDR's remote base. It runs a headless DRAWS™ HAT on a Raspberry Pi 3+. I access it from about 60 miles away over VNC. The left and right mini DIN-6 ports run independently

#xastir #wsjtx #pulseaudio #draws

Thanks for pointing this out John. I will putter around with Annaliese’s instructions… Exactly why I bought this little beast in the first place! Since my most of rigs are primarily ICOM, it will be i

#xastir #wsjtx #pulseaudio #draws

I attempted to use ~/n7nix/bin/prog_refresh.sh script to update programs. FLDIGI builds and updates but XASTIR fails. XASTIR -V is an invalid option (and XASTIR -v sets the debug level). ./xs_verchk.s

#draws #gpsd #config #xastir

Until Basil has a chance to add the updated Xastir, a prog_update won't update your install. The only path right now is to build from source.

#draws #gpsd #config #xastir

What are the proper port settings to use when setting up the DRAWS Hat with YAAC? I have everything working fine between the DRAWS Hat and my FT-891 using WSJT-X and FLDIGI with AX25-stop Now I think

#yaac #xastir

I have some Xastir configuration notes here: https://github.com/nwdigitalradio/n7nix/tree/master/xastir The "Configure interfaces" section will be useful for you. These notes were written for a UDRC I

#yaac #xastir

As Basil says, his AX25 scripts start and stop both the Direwolf modem and the AX25 stack. YAAC is pretty simple to connect. With direwolf running, you simply go into interfaces and select an AGW inte

#yaac #xastir