There is no upgrade path from draws_image13 which uses Debian stretch to the latest Raspbian distribution which uses Debian buster. This is because the transition of the DRAWS driver support to be in

#yaac #replacecompass #draws #install #js8call

Edouard Lafargue <ed@...> writes: In the latest kernels supported by Raspbian (4.19.58) DRAWS hat required drivers are in the main stream Linux kernel. You still need to load the overlay in /bo

#yaac #replacecompass #draws #install #js8call

I was able to successfully see the sound card when completing the steps that Mr. Hays gave. The issue I have is going onto the n7nix scripts. After running the ./app_config.sh core, I no longer see th

#yaac #replacecompass #draws #install #js8call

Why not just simply release a Debian "draws.deb" package that enables the DRAWS ? This is the standard way to do that sort of stuff on Debian/Raspbian and would avoid having to create full image inste

#yaac #replacecompass #draws #install #js8call

Second that notion. There is a lot of what I consider unwanted fluff in this image since I don't care about packet radio. I would really like to have a clean image with only the necessary drivers and

#yaac #replacecompass #draws #install #js8call

Hi Mike, I can confirm that I am powering it via the 12 volt plug. When you write up your clean install, please could you specify which version of the buster image you use. I am using a Pi4 for all th

#yaac #replacecompass #draws #install #js8call

Hi John, I redid it using sudo apt upgrade - no difference. Maybe the best way forward, since you guys can get it to go, would be to just have you guys make a buster image ready to go for the Pi4 and

#yaac #replacecompass #draws #install #js8call

Hi Mike, I am powering through the Pi not the 12 volts, but I don't think that makes any difference as long as the power supply is not being maxed out. I have tried using the 12 volts in the past. Fra

#yaac #replacecompass #draws #install #js8call

I promise to do a clean install on Buster, no scripts, to documents what it is I did to get the sound card detected. Just to confirm with everyone that is chiming in right now that hasn't got it worki

#yaac #replacecompass #draws #install #js8call

Hi John, I don't think the dist-upgrade makes any difference but I'll try again. Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

Hi Corky, The current "buster" seems to work fine at my place with the N7NIX script. I find clean installs work best, but Pi 4/Buster are still leading edge.

#yaac #replacecompass #draws #install #js8call

Noticed kernel 4.19 in his output. When I updated my Beta13 using the supplied scripts the kernel upgraded to a 4.19 version and then nothing worked. That may be a clue.

#yaac #replacecompass #draws #install #js8call

I am not sure if this is still the case as the latest Buster image may include the updated kernel. When I did this on an R-Pi 3B+, I needed to run rpi-update to get the latest kernel and once that was

#yaac #replacecompass #draws #install #js8call

The main difference I see, and may be the culprit is the sudo apt dist-upgrade The dist-upgrade may be introducing the conflict, I just do an upgrade.

#yaac #replacecompass #draws #install #js8call

Hi John, Decided to try again with new SD card and all. 1. Downloaded Buster 2019-07-10-raspbian-buster.img 2.Got new SanDisk Extreme 64 gig SD out of package. 3. Used Etcher to flash image. 4. Booted

#yaac #replacecompass #draws #install #js8call

I took the commands I provided, directly from my shell history One additional command I gave 1st was sudo apt install git build-essential vim nmap (before running the git clone and script) just to mak

#yaac #replacecompass #draws #install #js8call

This happened to me after it had been working. I re-imaged the SD card and it came back to life. In my case, I had used some of the scripts to update the HF programs and some other things. After that

#yaac #replacecompass #draws #install #js8call

Hi John, I tried using a raspberry pi 3B and the same thing. The aplay -l command did not return the card1 info. This is beginning to look like a case of I can't get there from here. Maybe someone els

#yaac #replacecompass #draws #install #js8call

Hi John and Frank If you do take this off line and you get it working, please could you post to the list what steps were taken. I am having the same issue with my PI4 as Frank. Regards Jonathan GI7KMC

#yaac #replacecompass #draws #install #js8call

Would the same instructions also work with a UDRC-II card ? I tried them on Vanilla Buster with a RPi 3B+ with no success so far... Ed

#yaac #replacecompass #draws #install #js8call