Thank you. draws manager is setup and I put the settings in for the 500 mv setting for the kenwood tm 707. I am still having the issue with input device and rig control errors.

#draws

Regarding getting FLdigi and WSJT-X to transmit with audio - not working and in fact when I have FLdigi and FLrig and Draws Manager running my system hangs up rock solid and I have

q=draws-manager /Basil n7nix

Switched to right in draws manager, same result. I selected preset for ft 817 af. Audio in out in wsjt plughwCARD=udrc, DEV=0. Rick

Hi, Sorry but the video fails to explain how to install Draws-Manager and how to start it. I do not see it on my nwdr15.img installed system. Regards, Bernard, f6bvp

Instructions and code at https://github.com/nwdigitalradio/draws-manager

:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# root@raspberrypi:/home/pi/draws-manager# /root/.npm/_logs/2020-02-18T18_30

What does this return: ls -l /usr/local/var/draws-manager/webapp ls -l /usr/local/var/draws-manager/webapp/bin

draws-manager is installed & running by default on the nwdr15 image.

/bin_refresh.sh sudo su apt-get update apt-get dist-upgrade and after a reboot draws-manager again ran fine.

Here is the complete bebug log. root@raspberrypi:/home/pi# systemctl status draws-manager ● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration

On the DRAWs manager, I have the IC-880AF rig chosen.

I also use the DRAWs Manager page and set all levels to zero, and also in the Audio driver page (Right Click on speaker icon on RPi task bar) I set all IN2 to 10k.

Above alsa setting are from the alsa IC7000 script I tried for start then I used draws manager : pi@asawizard:~/n7nix/debug $ alsa-show.sh ===== ALSA Controls for Radio Transmit ===

Basil, I was monitoring 144.390 MHz with second rcvr and only heard a couple APRS transmissions. which might also been when the alsa settings were from the IC7000 script. I copied and pasted every ste

Manager" to set your audio levels.

#draws

* Verify using draws manager * Input from Receiver: AF (pin5) for your left channel. * Verify the setting in the Radio that tells it to use the Data connector for transmit audio, instead

#wsjt-x #ft-8

I really don't understand the audio settings (Draws Manager)...can you explain a bit more about what the settings mean, and what is going on?

/usr/local/var/draws-manager/webapp/radios.json { "radio":"FT-857D FM AX25", "audiorx":"af", "negresistor":"10 kOhm", "powertune":"PTM_P3", "pcmvol":"15.00db", "lodigvol":"0.00db",

#drawsmanager #draws-manager

Added to git repository

#drawsmanager #draws-manager