Jul 29 11:31:35 nvdpi systemd[1]: Started DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration..

#drawsmanager

The sensors command (along with a bunch of other things) is not working in kernel 5.4.51, that is what is causing draws-manager to fail.

#drawsmanager

Okay, start over from scratch it is! A little repetition never hurt the learning curve! Thanks, Charlie

#drawsmanager

Basil - that includes the "Welcome to Raspberry Pi" automated configuration where it asks to update Software as well, correct? Charlie

#drawsmanager

If you skip that update the kernel is at "4.19.118-v7+" Charlie

#drawsmanager

4.19.118 good 5.4.51 BAD Charlie Hein <chein@...> writes:

#drawsmanager

I'm guessing that it's been maybe a half hour from the time I put the card into the Pi, and I'm seeing packets off the air and DRAWS-Manager is functional.

#drawsmanager

I was curious if the temp measurements in Draws Manager were on the Draws Hat or the RPi? Best regards, Paul W04BCZ

When I run "sudo systemctl status draws-manager" this is the output: draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration.

Having the draws-manager error out will not affect ax.25/direwolf.

Do NOT run draws-manager web app as it needs some work to be compatible with the new sensors driver. The NWDR17 image has the draws-manager daemon disabled.

Draws manager that is, old fldigi version seems still intact. Thanks, Todd AL7PX

Regarding DRAWS manager: at the bottom of this post you will find your answer. https://nw-digital-radio.groups.io/g/udrc/message/5111 DRAWS manager will not work properly on kernel

Hello Basil: Current versions. pi@radiopi:~/n7nix/hfprogs $ ./hf_verchk.sh js8call: current version: 2.2.0-ga, installed: 1.0.0-rc3 wsjtx: current version: , installed: 2.0.1 Library: libflxmlrpc IS l

In a console do the following: cd cd n7nix git pull cd hfprogs ./hf_verchk.sh -u # then to verify ./hf_verchk.sh If you have problems I will need to see all the console output. Todd via groups.io <ic7

All match, but still can't get DRAWS Manager to come up in the browser localhost8080. Todd AL7PX

Since you are running an older kernel the following might work to start DRAWS manager otherwise my previous answer holds. cd cd n7nix/config .

set of commands: manager-sysd.sh status pi@radiopi:~/n7nix/config $ manager-sysd.sh status Systemd draws-manager.service is enabled ● draws-manager.service - DRAWS™ Manager - A web

Basil: This isn't true, I am interested in why flmsg didn't get updated. I put some error checking in a new fl apps install script and wonder if you would please run it and post the console output. cd

Not seeing where you ran: ./hf_install.sh pi flmsg 4.0.16 I need all the console output of this command to see where it is failing. Also : /tmp/js8call_changelog.txt: Permission denied I have no idea