Somebody wanted to know what I wanted DRAWS to do with my Kenwood TH-H710G.

#drawsmanager

New feature "Application Help" in DRAWS™ Manager From command line cd /usr/local/var/draws-manager sudo git pull sudo systemctl restart draws-manager Or select "Update DRAWS™ Manager

#drawsmanager

John, when I entered the command as suggested under application help I got the message “ no such file or directory.” Rick. Ka4ohm

#drawsmanager

/setalsa-ft817.sh” a bunch of settings flash by as in Johns video but I never see the draws- manager app.

#drawsmanager

Which command? Which beta are you using?

#drawsmanager

However, you can run sudo systemctl status draws-manager Which will tell you if it is running. DRAWS™ Manager is a web application.

#drawsmanager

The best thing to do to set transmit levels is to use John's DRAWS Manager web config. https://github.com/nwdigitalradio/n7nix/blob/master/docs/DRAWS_ALSA.md Also know that script

Radio: Yaesu FT-891 CAT control works over USB Radio connected via LEFT Audio port (closest to GPS port) RIGHT Audio port disabled via DRAWS Manager I’ve ran `sudo bin/setalsa-ft817

I plugged the new cables into the DRAWS and KX2 and followed the setup instructions from Steve McGrane's latest video (thanks Steve) and the video from NW-Digital on Draws Manager.

#hf #draws

manager. 28d4af1 - n7nix, 4 days ago : Switch to using nmea sentences instead of gpsd sentences. 90e3054 - n7nix, 4 days ago : Set no-pager on journalctl call. 7aee713 - n7nix, 4 days

I checked and it looks like right after finishing copying the AX25 files it updates the DRAWs manager.

Apr 18 22:06:03 draws bash[31986]: ax25-upd: Start Port udr0 with device /tmp/ki Apr 18 22:06:03 draws bash[31986]: Direwolf serial port NOT FOUND Apr 18 22:06:03 draws systemd[1]:

Use DRAWS™ Manager (localhost:8080 on the Pi) to check/set the audio levels. https://www.youtube.com/watch?v=v5C3cWVVz_A Do a DRAWS™ Manager update at beginning.

It also has the levels that you would plug into DRAWS™ Manager to get the values for setting the input values for the radio. http://manual.kenwood.com/files/TM-G707-English.pdf

#draws

I do have a few notes and questions that I'd like to pass along: for the draws manager: - please change the default so that it will ONLY listen to local host. its a huge security deal

Web app: /usr/local/var/draws-manager http://www.icom.co.jp/world/support/download/manual/pdf/IC-706MK2G.pdf Look for "Adjusting the transmit signal output from the TNC" on Page 37

I figured that people might benefit from having a 'storage place' or 'starting place' for draws manager settings for SPECIFIC radios.

#drawsmanager #draws-manager

The popups are to show what commands are being executed by DRAWS™ Manager, you don't need to do anything with them. thanks again for everyone's hard work on this!

I couldn't find the vpp for the input to the baofeng, so I just messed around with stuff until it kinda sounded right, still very much in testing phase baofeng uv5r (and others): mic/speaker connector

#drawsmanager #draws-manager

Run Johns draws-manager, Open a browser & enter: localhost:8080 You can verify some things by following this doc: https://github.com/nwdigitalradio/n7nix/blob/master/docs/VERIFY_CONFIG.md