The DRAWS manager is running, everything seems normal - except in wsjt-x (and others) i'm getting audio errors on startup - both input and output devices.

™ Manager tool to set levels, if using ALSA raw left and right.

One additional item, add the attached file to /etc/sensors.d And don't forget https://github.com/nwdigitalradio/draws-manager

Have also added some comments about installing DRAWS Manager ("Follow the instructions at...") /Lars - LA4RHA

Have you looked at the output settings in draws manager and tried to adjust those? Have you confirmed that the audio settings are correct for transmit in the wsjt-x program?

#ft-891 #draws #ft-8 #wsjtx

I have tried moving the sliders all over in DRAWS manager and playing with digital gain on the radio itself. All to no avail.

In DRAWS™ Manager, try the default settings for the FT-817 and make small changes from there.

Have you checked the draws manager and make sure AF (pin5) for your channel. Also make sure Direwolf is not running cd cd bin sudo su ./ax25-stop Tim / AG6RS

#ft-891 #draws #ft-8 #wsjtx

/udrcver.sh Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0405 UUID: 3036072f-20a8-441c-9901-4e8abec0fab4 Vendor

#earlyadopter #beta13

Did you try DRAWS ™ Manager? https://youtu.be/v5C3cWVVz_A You may want to also do a factory reset on the radio.

Ken, did you look at Draws manager? That has output adjustments . Also the power slider on the right of the wsjt-x screen can be adjusted. Rick. Ka4ohm

I've included a screenshot of the DRAWS Manager settings and have attempted sending both prior to and after configuration. I've also confirmed that Direwolf is not running.

#ft-891 #draws #ft-8 #wsjtx

Forgot to include my DRAWS manager screenshot! Cheers, Matt - N7ROO

#ft-891 #draws #ft-8 #wsjtx

I've found that I need to run the `setalsa-ft817.sh` script that was included in the ~/bin directory, after that, I opened the DRAWS Manager and changed the Input from Receiver Signal

Try measuring your deviation. https://www.febo.com/packet/layer-one/transmit.html You can send a tone using the measure_deviate.sh script found here: n7nix/deviation Use John's draws-manager

#paclink-unix #pac-link

I think I spent a bunch of time on device settings in Draws Manager when all I had to do is find another gateway system.

#paclink-unix #pac-link

Try DRAWS ™ Manager It should set levels properly.

p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,30031339 Since you have a Pi 4 you may need to install from source https://github.com/nwdigitalradio/draws-manager

Hmm, I installed and ran DRAWS Manager from source, and set my ALSA settings using its presets.

I am using DRAWS software version "DRAWS_BETA13" from May 7, 2019. I connected to DRAWS MANAGER and set the receive & transmit levels there.